2015 Dodge Durango Owner Manual - Page 513

STARTING AND OPERATING 511 If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the Tire Pressure Monitoring Telltale Light will no longer flash, the ЉSERVICE TPM SYSTEMЉ message will not be present, and a pressure value will be displayed instead of dashes. A system fault can occur by any of the following: 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. The DID will also display a ЉSERVICE TPM SYSTEMЉ message for a minimum of five seconds when a system fault is detected possibly related to an incorrect sensor location fault. In this case, the ЉSERVICE TPM SYSTEMЉ message is then followed by a graphic display, with 1. Jamming due to electronic devices or driving next to pressure values still shown. This indicates the pressure facilities emitting the same Radio Frequencies as the values are still being received from the TPM Sensors but TPM sensors. they may not be located in the correct vehicle position. 2. Installing some form of aftermarket window tinting However, the system still needs to be serviced as long as the ЉSERVICE TPM SYSTEMЉ message exists. that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings. 5