1996 Ford Crown Victoria Owner's Manual - Page 112

u TAP-DOWN - Press and then quickly release the COAST switch. Each time you "tap" the switch, the set speed will decrease by one (1) mph (1.6 km/h). Multiple taps will cause the set speed to decrease in increments of one (1) mph (1.6 km/h). For example, if the current set speed is 60 mph (96 km/h) five (5) taps of the COAST switch will decrease the vehicle speed and SET it at 55 mph (88 km/h). If vehicle speed is reduced below 30 mph (50 km/h) by any of the above methods, then you must manually accelerate to a speed over 30 mph (50 km/h) and reset the system. To reset the speed control to a higher speed, follow one of these procedures: u ACCEL - Press and hold the SET ACCEL u Depress the accelerator pedal. When the switch. Release the switch when the vehicle has accelerated to the desired speed. vehicle attains the desired speed, press the SET ACCEL switch and release it immediately. SET ACCEL switch. Each time you "tap" the switch, the set speed will increase by one (1) mph (1.6 km/h). Multiple taps will cause the set speed to increase in increments of one (1) mph (1.6 km/h). For example, if the current set speed is 55 mph (88 km/h) five (5) taps of the SET ACCEL switch will increase the vehicle speed and SET it at 60 mph (96 km/h). u TAP-UP - Press and then quickly release the 119