1997 Ford Explorer Severe Duty Supplement 1st Printing - Page 9

1997 Ford Explorer Manual

Page 9 highlights

Maintenance recommendations Manual transmission and differential fluid (if equipped) Clean and remove the filler plug. The fluid level should be up to the bottom of the filler plug hole. For more information on differential fluid maintenance, refer to Checking and adding differential fluid in the Maintenance and care chapter of the "Owner Guide". Clutch fluid (if equipped) The clutch fluid for your vehicle is self-adjusting and should not require any routine service. During normal operation, the fluid level in the clutch fluid reservoir will slowly rise. If the fluid level drops, add fluid to maintain the level at the step in the reservoir body. If it is necessary to remove the fluid reservoir cap, thoroughly clean the cap before removal to prevent contaminants from entering the reservoir. Remove the internal diaphragm and add only Ford High Performance DOT 3 Brake Fluid C6AZ-19542-AA or an equivalent DOT 3 fluid that meets Ford specification ESA-M6C25-A. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Manual transmission and
differential fluid (if equipped)
Clean and remove the filler plug.
The fluid level should be up to the
bottom of the filler plug hole. For
more information on differential
fluid maintenance, refer to
Checking and adding differential
fluid
in the
Maintenance and
care
chapter of the “Owner
Guide”.
Clutch fluid (if equipped)
The clutch fluid for your vehicle is
self-adjusting and should not
require any routine service.
During normal operation, the fluid
level in the clutch fluid reservoir
will slowly rise. If the fluid level
drops, add fluid to maintain the
level at the step in the reservoir
body.
If it is necessary to remove the
fluid reservoir cap, thoroughly
clean the cap before removal to
prevent contaminants from
entering the reservoir. Remove the
internal diaphragm and add only
Ford High Performance DOT 3
Brake Fluid C6AZ-19542–AA or an
equivalent DOT 3 fluid that meets
Ford specification ESA-M6C25–A.
Maintenance recommendations
9