1999 Ford F150 SVT Supplement 1st Printing - Page 12

Maintenance REFILL CAPACITIES Fluid Brake fluid Engine oil (includes filter change) Engine coolant 1 Intercooler coolant 1 Power steering fluid Rear axle lubricant Fuel tank Transmission fluid Windshield washer fluid 1 2 3 Ford Part Name High Performance DOT 3 Motor Vehicle Brake Fluid Motorcraft 5W-30 Super Premium Motor Oil Premium Engine Coolant Premium Engine Coolant Motorcraft MERCON௡ ATF Motorcraft SAE 80W90 Premium Rear Axle Lubricant N/A Motorcraft MERCON௡ ATF Ultra-Clear Windshield Washer Concentrate Capacity Fill to line on reservoir 5.7L (6.0 quarts) 24.1L (25.5 quarts) 4.0L (4.2 quarts) Fill to line on reservoir 3.3-3.8L (7.5-8.0 pints) 94.6L (25.0 gallons) 15.0L (15.9 pints) 4.0L (4.25 quarts) Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford Extended Life Engine Coolant (orange in color). 2 Fill 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole. Add 118 ml (4 oz.) of additive friction modifier C8AZ-19B546-A, Ford specification EST-M2C118-A for complete refill of Traction-Lok axles. Your vehicle's rear axle is filled with a synthetic rear axle lubricant and is considered lubricated for life. These lubricants do not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water. 3 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON௡ and MERCON௡ V are not interchangeable. DO NOT mix MERCON௡ and MERCON௡ V. Refer to your Scheduled Maintenance Guide to determine the correct service interval. 12