2001 Ford Excursion Owner's Manual - Page 71
2001 Ford Excursion Manual
Page 71 highlights
Controls and features Compass zone adjustment 1. Determine which magnetic zone you are in for your geographic location by referring to the zone map. 2. Locate the trip computer on the overhead console. 3. Turn ignition to the ON position. 1 2 3 13 4 12 5 6 7 8 9 10 11 15 14 4. Press and hold both trip computer controls. After approximately four seconds, the trip computer will enter zone setting E/M MODE mode. Zone setting mode is indicated when the display lights the RESET "ZONE" indicator. 5. Release both controls. Subsequent pressing of either control will increment the zone. Press the control repeatedly until the correct zone setting for your geographic location is displayed on the trip computer. 6. To exit the zone setting mode and save the displayed zone in memory, release both controls for greater than five seconds. Compass calibration adjustment Perform this adjustment in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 71