2002 Ford Escape Owner's Manual - Page 77
2002 Ford Escape Manual
Page 77 highlights
Lights 7. Insert the glass end of the new bulb into the headlamp assembly. When the bulb's three metal tabs are aligned with the grooves in the plastic base, push the bulb into the lamp assembly until the bulb's metal base contacts the plastic base. 8. Rotate the retainer spring over the bulb metal base and secure it on the bulb hooks. 9. Install rubber boot on the lamp assembly. Be sure to press firmly around the perimeter of the boot and around the bulb to ensure the proper seal of the bulb. 10. Connect the electrical connector into the rear of the bulb until it "snaps." Replacing brake/tail/turn/backup/rear fog lamp bulbs The brake/tail/turn/backup/rear fog lamp bulbs are located in the tail lamp assembly, one just below the other. Follow the same steps to replace either bulb: 1. Open the liftgate to expose the lamp assemblies. 2. Remove the two screws from the lamp assembly. 3. Carefully remove the lamp assembly by pulling it rearward to disengage snap features on the outward side of the lamp. 4. Twist the bulb socket counterclockwise and remove from lamp assembly. 77