2003 Ford F250 Diesel Supplement 2nd Printing - Page 4
2003 Ford F250 Manual
Page 4 highlights
Diesel information Diesel information DIESEL ENGINE INFORMATION The Diesel engine fuel system consists of: • an engine-mounted secondary fuel filter • frame-mounted Horizontal Fuel Conditioner Module (HFCM) • a unit injector for each cylinder The HFCM acts as a primary fuel filter/water separator which removes both water and impurities from the fuel. The engine-mounted fuel filter and the HFCM filter should be changed at the recommended service interval. Refer to the Scheduled maintenance guide section of this manual for more information. The HFCM should be drained at regular intervals or when the WATER IN FUEL light illuminates in the instrument cluster. The fuel injectors are located in the center of the combustion chambers in the cylinder head between the rocker arm assemblies. The glow plug system and fuel injection system are controlled through the Powertrain Control Module (PCM) and Fuel Injection Control Module (FICM). Fuel is drawn from the fuel tank by a frame-mounted electric fuel pump. The fuel pump provides pressurized fuel to the engine and is electronically controlled by the fuel pump PCM relay. The fuel pump contains a pressure relief valve for overpressure protection in the event of restricted flow. Lubrication system It is important to change the engine oil at the recommended service intervals, because oil viscosity is important in maintaining the oil pressure required to actuate the fuel injectors. Extended oil change intervals can negatively affect engine performance, fuel economy and engine life. Refer to the engine oil specification chart located under Engine oil specifications in the General maintenance information chapter. 4