2003 Ford Mustang SVT Supplement 1st Printing - Page 15

2003 Ford Mustang Manual

Page 15 highlights

Maintenance Fluid Ford Part Name Intercooler coolant Motorcraft Premium Engine Coolant (green-colored) or Motorcraft Premium Gold Engine Coolant (yellow-colored) Transmission fluid Refer to the label 3 on your transmission Windshield washer Ultra-Clear fluid Windshield Washer Concentrate 1 Capacity 3.75L (3.96 qts) 3.9L (8.2 pints)4 3.8L (4.0 quarts) Add the coolant type originally equipped in your vehicle. Rear axle lubricants do not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water. Fill 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole. Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok axles. 3 The TTC T56 6 Speed transmission on your SVT Mustang Cobra uses automatic transmission fluid. Ensure the correct automatic transmission fluid is used as indicated in the label on your transmission. 4 Service refill capacity is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. 2 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Fluid
Ford Part Name
Capacity
Intercooler coolant
Motorcraft
Premium Engine
Coolant
(green-colored) or
Motorcraft
Premium Gold
Engine Coolant
(yellow-colored)
3.75L (3.96 qts)
Transmission fluid
3
Refer to the label
on your
transmission
3.9L (8.2 pints)
4
Windshield washer
fluid
Ultra-Clear
Windshield Washer
Concentrate
3.8L (4.0 quarts)
1
Add the coolant type originally equipped in your
vehicle.
2
Rear axle lubricants do not need to be checked or
changed unless a leak is suspected, service is
required or the axle assembly has been submerged
in water. The axle lubricant should be changed any
time the rear axle has been submerged in water. Fill
6 mm to 14 mm (1/4 inch to 9/16 inch) below
bottom of fill hole. Add 118 ml (4 oz.) of Additive
Friction Modifier C8AZ-19B546-A or equivalent
meeting Ford specification EST-M2C118
A for
complete refill of Traction-Lok axles.
3
The TTC T56 6 Speed transmission on your SVT
Mustang Cobra uses automatic transmission fluid.
Ensure the correct automatic transmission fluid is
used as indicated in the label on your transmission.
4
Service refill capacity is determined by filling the
transmission to the bottom of the filler hole with the
vehicle on a level surface.
Maintenance
15