2006 Ford Expedition Owner Guide 2nd Printing - Page 250
2006 Ford Expedition Manual
Page 250 highlights
Driving Maneuvering quickly to avoid an accident, pedestrian or obstacle Hitting a patch of ice Changing lanes on a snow-rutted road Entering a snow-free road from a snow-covered side street, or vice versa • Entering a paved road from a gravel road, or vice versa • Hitting a curb while turning • Driving on slick surfaces • Cornering while towing a heavily loaded trailer (refer to Trailer Towing in this chapter) The RSC feature works to further enhance the vehicle's overall stability during aggressive maneuvers. The RSC feature helps maintain roll stability of the vehicle during aggressive maneuvers by applying brake force to one or more wheels. The AdvanceTrac with RSC system automatically turns on when the engine is started. However, the system does not function when the vehicle is traveling in R (Reverse) or, if equipped with four-wheel drive, in 4L (4X4 LOW). In R (Reverse) or in 4L (4X4 LOW), ABS and the traction enhancement feature will continue to function. The AdvanceTrac with RSC button allows the driver to control the availability of the AdvanceTrac with RSC system. The RSC system status is indicated by a warning indicator light with a "sliding car" icon in the instrument cluster that will flash when the system is activated and an indicator light in the control button that will illuminate when the system is turned off. In vehicles with a message center, the message "ADVANCETRAC OFF" will be displayed. If a failure is detected in the AdvanceTrac with RSC system, the warning indicator light in the instrument cluster will stay on. If the warning indicator light in the instrument cluster remains on while the engine is running, have the system serviced by an authorized dealer immediately. Pressing the button once will disable the AdvanceTrac with RSC stability enhancement system and the engine power reduction portion of the traction enhancement feature; the brake portion of the traction enhancement feature will still function normally. Pressing and holding the button for more than five seconds will disable the AdvanceTrac with 250 2006 Expedition (exd) Owners Guide (post-2002-fmt) USA (fus)