2006 Ford F350 Special Off-Road Package Supplement 1st Printing - Page 14

2006 Ford F350 Manual

Page 14 highlights

Driver Controls Disengage the clutch and, using the snatch block, pull out enough rope to reach your anchor point. Do not attach the hook to the mounting kit. Secure to the anchor point with a tree protector or choker chain. Attach the clevis/D-shackle. Attach the shackle to the two ends of the protector/chain being careful not to overtighten (tighten and back off 1⁄2 turn). Triple line Use the same techniques as a double line. Select a strong mounting location on your vehicle for the snatch block and the clevis/D-shackle. Keep at a 90° angle between the winch and run the wire rope to the first anchor point and through the snatch block. Secure the rope back to the vehicle. Put the rope through the snatch block and secure it with the clevis/D-shackle on the vehicle as close to the winch as possible. Run the rope to the final anchor point. Secure to the anchor point with a tree protector or choker chain. Attach the clevis/D-shackle. Attach the clevis/D-shackle to the two ends of the protector/chain, being careful not to overtighten (tighten and back off 1⁄2 turn). 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Disengage the clutch and, using the
snatch block, pull out enough rope
to reach your anchor point. Do not
attach the hook to the mounting kit.
Secure to the anchor point with a tree protector or choker chain. Attach
the clevis/D-shackle. Attach the shackle to the two ends of the
protector/chain being careful not to overtighten (tighten and back off
1
±
2
turn).
Triple line
Use the same techniques as a
double line.
Select a strong mounting location on your vehicle for the snatch block
and the clevis/D-shackle. Keep at a 90° angle between the winch and run
the wire rope to the first anchor point and through the snatch block.
Secure the rope back to the vehicle. Put the rope through the snatch
block and secure it with the clevis/D-shackle on the vehicle as close to
the winch as possible. Run the rope to the final anchor point.
Secure to the anchor point with a tree protector or choker chain. Attach
the clevis/D-shackle. Attach the clevis/D-shackle to the two ends of the
protector/chain, being careful not to overtighten (tighten and back off
1
±
2
turn).
Driver Controls
14