2007 Ford Expedition EL Owner Guide 3rd Printing - Page 90

Lights 3. At the back of the headlamp, remove the two headlamp assembly retainer bolts. 4. Slide headlamp assembly forward and off the retaining tab to expose the back of the bulb and electrical connector. 5. Disconnect the electrical connector. 6. Remove the bulb by turning it counterclockwise and then pulling it straight out. Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated. 7. Insert the glass end of the new bulb into the headlamp assembly. When the grooves in the plastic base are aligned, turn the new bulb clockwise to install. 8. Connect the electrical connector. 9. Install the headlamp assembly and secure with two retainer bolts. 90 2007 Expedition (exd) Owners Guide (post-2002-fmt) USA (fus)