2008 Ford F250 Diesel Supplement 4th Printing - Page 73
2008 Ford F250 Manual
Page 73 highlights
Scheduled Maintenance: E-Series 120,000 miles (192,000 km) ❑ Change engine oil and replace oil filter ❑ Replace engine- and frame-mounted fuel filters ❑ Change automatic transmission fluid and internal Torqshift transmission fluid filter located inside the transmission bottom pan. Inspect automatic transmission fluid level on all other vehicles if equipped with dipstick. Consult your dealer for particular requirements. Replace wheel bearing grease and grease seals on 4x2 wheel bearings (if non-sealed bearings) Perform multi-point inspection (recommended) Rotate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Inspect and lubricate steering linkage, ball joints, suspension, driveshaft and U-joints Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system Inspect exhaust system and heat shields Inspect accessory drive belt(s) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 127,500 miles (204,000 km) Change engine oil and replace oil filter Rotate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Perform multi-point inspection (recommended) RO#: DATE: DEALER VALIDATION: P&A CODE: MILEAGE: 73