2008 Ford F250 Scheduled Maintenance Guide 3rd Printing - Page 15
2008 Ford F250 Manual
Page 15 highlights
NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 7,500 miles ❑ Change engine oil and replace oil filter ❑ Perform multi-point inspection (recommended) ❑ Rotate tires, inspect tires for wear and measure ❑ tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect wheels for end play and noise DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 15,000 miles ❑ Change engine oil and replace oil filter ❑ Replace cabin air filter (if equipped) ❑ Inspect steering linkage, suspension and, if ❑ Inspect engine cooling system and hoses ❑ Inspect brake pads, shoes, rotors, drums, brake Tires equipped, driveshaft, ball joints and U-joints lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect engine air filter Inspect automatic transmission fluid level (if equipped with an underhood dipstick) Lubricate ball joints and U-joints (if equipped with zerk fittings) Inspect and lubricate 4x4 front axle U-joints Perform multi-point inspection (recommended) Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect wheels for end play and noise DEALER VALIDATION: Normal Schedule Trucks, Fullsize Vans & SUVs RO#: DATE: P&A CODE: MILEAGE: When your tires need to be replaced, consider visiting your Ford or Lincoln Mercury dealership for name-brand tires and people who know your vehicle. And if your Ford or Lincoln Mercury dealership sells the name-brand tire, they can also honor the tire manufacturer's warranty. Scheduled Maintenance 15 2008 (smg) Scheduled Maintenance Guide USA (fus)