2008 Ford F350 Diesel Supplement 4th Printing - Page 75

2008 Ford F350 Manual

Page 75 highlights

Scheduled Maintenance: E-Series 150,000 miles (240,000 km) ❑ Change engine oil and replace oil filter ❑ Replace engine- and frame-mounted fuel filters ❑ Replace accessory drive belt(s) (if not replaced in the last ❑ Replace wheel bearing and wheel bearing grease seals (if ❑ Change Premium Gold coolant (see Motorcraft Premium Gold ❑ Vehicles equipped with the Torqshift transmission and the Coolant Change Record) externally mounted remote filter element, replace the automatic transmission fluid and the externally mounted filter element (if equipped). Inspect automatic transmission fluid level on all other vehicles if equipped with dipstick. Consult your dealer for particular requirements. Change rear wheel drive (RWD) axle fluid - DANA axles not using synthetic fluid only Perform multi-point inspection (recommended) Rotate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Inspect and lubricate steering linkage, ball joints, suspension, driveshaft and U-joints Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect exhaust system and heat shields DEALER VALIDATION: 100,000 miles) non-sealed bearings) RO#: DATE: P&A CODE: MILEAGE: SPECIAL OPERATING CONDITIONS Towing a trailer or using a camper or car-top carrier Every 5,000 miles (8,000 km) or Change engine oil and replace filter 6 months Every 5,000 miles (8,000 km) Check air filter restriction gauge (replace air filter as required or when air filter restriction gauge indicates) Rotate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise Every 10,000 miles (16,000 km) or Change engine-mounted fuel filter and chassis-mounted 400 hours of engine operation (FCM) fuel filter (whichever comes first) Every 30,000 miles (48,000 km) Replace wheel bearing grease and grease seals on 4x2 wheel bearings (if non-sealed bearings) 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

SPECIAL OPERATING CONDITIONS
Towing a trailer or using a camper or car-top carrier
Every 5,000 miles (8,000 km) or
6 months
Change engine oil and replace filter
Every 5,000 miles (8,000 km)
Check air filter restriction gauge (replace air filter as
required or when air filter restriction gauge indicates)
Rotate tires, inspect tires for wear and measure tread
depth and inspect wheel ends for endplay and noise
Every 10,000 miles (16,000 km) or
400 hours of engine operation
(whichever comes first)
Change engine-mounted fuel filter and chassis-mounted
(FCM) fuel filter
Every 30,000 miles (48,000 km)
Replace wheel bearing grease and grease seals on 4x2
wheel bearings (if non-sealed bearings)
150,000 miles (240,000 km)
Change engine oil and replace oil filter
Replace engine- and frame-mounted fuel filters
Replace accessory drive belt(s) (if not replaced in the last
100,000 miles)
Replace wheel bearing and wheel bearing grease seals (if
non-sealed bearings)
Change Premium Gold coolant (see Motorcraft Premium Gold
Coolant Change Record)
Vehicles equipped with the Torqshift transmission and the
externally mounted remote filter element, replace the auto-
matic transmission fluid and the externally mounted filter
element (if equipped). Inspect automatic transmission fluid
level on all other vehicles if equipped with dipstick. Consult
your dealer for particular requirements.
Change rear wheel drive (RWD) axle fluid - DANA axles
not
using synthetic fluid only
Perform multi-point inspection (recommended)
Rotate tires, inspect tires for wear and measure tread depth
and inspect wheel ends for endplay and noise (vehicles with
dual rear wheels should only rotate if unusual wear is noted)
Inspect air filter restriction gauge, replace filter as required
Inspect and lubricate steering linkage, ball joints, suspension,
driveshaft and U-joints
Inspect engine cooling system and hoses
Inspect brake pads, shoes, rotors, drums, brake lines and
hoses and parking brake system.
Inspect exhaust system and heat shields
D
EALER
V
ALIDATION
:
RO#:
P&A C
ODE
:
D
ATE
:
M
ILEAGE
:
Scheduled Maintenance: E-Series
75