2009 Ford E250 Cargo Scheduled Maintenance Guide 2nd Printing - Page 44

2009 Ford E250 Cargo Manual

Page 44 highlights

SPECIAL OPERATING CONDITIONS Crown Victoria Police Interceptor & Taxi, and Executive Series Town Car equipped with Engine Idle Hour Meter Every 5,000 miles Inspect brake system Rotate tires, inspect tires for wear and measure tread depth Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Lubricate control arm and steering ball joints (if equipped with zerk fittings) Every 5,000 miles or 6 months Inspect and lubricate U-joints Every 5,000 miles, 6 months or Change engine oil and replace oil filter (see as indicated by time/mileage description below) calculation Every 15,000 miles Replace fuel filter Every 30,000 miles Change automatic transmission fluid Every 60,000 miles Replace spark plugs As required Replace cabin air filter (if equipped) ENGINE IDLE HOUR METER (IF EQUIPPED): Your vehicle may be equipped with an idle meter to indicate how much time the vehicle is idling in P (Park) or N (Neutral). The meter is incorporated with the vehicle odometer. Depressing the odometer-reset button once will display the trip odometer (miles followed by a "T" for trip odometer). Depressing the odometer-reset button a second time will display the idle meter (hours followed by an "H" for hours). The idle meter only accumulates time when the vehicle is in P (Park) or N (Neutral). Displayed time is cumulative for the vehicle. It cannot be reset to zero. Police/Fleet vehicles often experience long periods of idling, during which engine oil will continue to break down but mileage is not accumulated on the odometer. To assist fleet managers in maintaining proper oil change intervals, the idle meter will help determine when an oil change is required. For every hour that the vehicle idles, it has accumulated the equivalent of approximately 33 miles of driving. Using the combination of the vehicle odometer and idle meter allows the fleet manager to better determine when the oil needs to be changed Engine idle hour meter calculation: Idle hours x 33 = miles equivalency Miles driven + miles equivalency = oil change interval 44 Scheduled Maintenance 2009 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 2nd Printing USA (fus)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49

Crown Victoria Police Interceptor & Taxi, and Executive Series Town
Car equipped with Engine Idle Hour Meter
Every 5,000 miles
Inspect brake system
Rotate tires, inspect tires for wear and measure tread
depth
Inspect
the
wheels
and
related
components
for
abnormal noise, wear, looseness, or drag
Lubricate control arm and steering ball joints (if
equipped with zerk fittings)
Every 5,000 miles or 6 months
Inspect and lubricate U-joints
Every 5,000 miles, 6 months or
as indicated by time/mileage
calculation
Change
engine
oil
and
replace
oil
filter
(see
description below)
Every 15,000 miles
Replace fuel filter
Every 30,000 miles
Change automatic transmission fluid
Every 60,000 miles
Replace spark plugs
As required
Replace cabin air filter (if equipped)
ENGINE IDLE HOUR METER (IF EQUIPPED):
Your vehicle may be equipped with an idle meter to indicate how much time the vehicle is idling in P
(Park) or N (Neutral). The meter is incorporated with the vehicle odometer. Depressing the odometer-reset
button once will display the trip odometer (miles followed by a “T” for trip odometer). Depressing the
odometer-reset button a second time will display the idle meter (hours followed by an “H” for hours). The
idle meter only accumulates time when the vehicle is in P (Park) or N (Neutral). Displayed time is
cumulative for the vehicle.
It cannot be reset to zero.
Police/Fleet vehicles often experience long
periods of idling, during which engine oil will continue to break down but mileage is not accumulated on the
odometer.
To assist fleet managers in maintaining proper oil change intervals, the idle meter will help determine when
an oil change is required. For every hour that the vehicle idles, it has accumulated the equivalent of
approximately 33 miles of driving. Using the combination of the vehicle odometer and idle meter allows
the fleet manager to better determine when the oil needs to be changed
Engine idle hour meter calculation:
Idle hours x 33 = miles equivalency
Miles driven + miles equivalency = oil change interval
S
PECIAL
O
PERATING
C
ONDITIONS
44
Scheduled Maintenance
2009 Scheduled Maintenance Guide
(smg)
Scheduled Maintenance Guide, 2nd Printing
USA
(fus)