2009 Ford F250 Diesel Supplement 2nd Printing - Page 77

2009 Ford F250 Manual

Get 2009 Ford F250 PDF manuals and user guides View all 2009 Ford F250 manuals

Page 77 highlights

Scheduled Maintenance: E-Series Extensive idling and/or low-speed driving for long distances as in heavy commercial use such as delivery, taxi, patrol or livery Every 5,000 miles (8,000 km), Change engine oil and replace filter 6 months or 200 hours of engine operation (whichever comes first) Every 5,000 miles (8,000 km) Check air filter restriction gauge (replace air filter as required or when air filter restriction gauge indicates) Inspect brake system Rotate tires, inspect tires for wear and measure tread depth and inspect wheel ends for endplay and noise Inspect and lubricate steering and suspension ball joints Every 10,000 miles (16,000 km) or Change engine-mounted fuel filter and chassis-mounted 400 hours of engine operation (FCM) fuel filter (whichever comes first) Every 15,000 miles (24,000 km) or Check the Nitrite level of the coolant using Fleetguardா 600 hours of engine operation DCA4 Test Strip Kit CC2602A to determine if recharge is (whichever comes first) required. If the Nitrite level is above 800 ppm no action is required. If the Nitrite level is 800 ppm or lower add 32 fl. oz. (946 mL.) of Supplemental Coolant Additive Motorcraft VC-8 or equivalent. Every 30,000 miles (48,000 km) Replace wheel bearing grease and grease seals on 4x2 wheel bearings (if non-sealed bearings) Every 30,000 miles (48,000 km) or Check the Nitrite level of the coolant using Fleetguardா 1200 hours of engine operation DCA4 Test Strip Kit CC2602A to determine if recharge is (whichever comes first) required. If the Nitrite level is above 800 ppm no action is required. If the Nitrite level is 800 ppm or lower add 32 fl. oz. (946 mL.) of Supplemental Coolant Additive Motorcraft VC-8 or equivalent. Every 45,000 miles (72,000 km) or Flush & refill engine coolant (refer to Motorcraft Premium 1800 hours of operation (whichever Gold Engine Coolant Change Record) - Do not add comes first) Supplemental Coolant Additive As required Replace cabin air filter, if equipped Note: When adding supplemental coolant additive, do not exceed the specified maximum of 32 fl. oz. (946 mL). Operating the engine with excessive supplemental coolant additive can cause severe engine damage. 77 2009 Econoline (eco) Supplement, 2nd Printing USA (fus)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Extensive idling and/or low-speed driving for long distances as in heavy
commercial use such as delivery, taxi, patrol or livery
Every 5,000 miles (8,000 km),
6 months or 200 hours of engine
operation (whichever comes first)
Change engine oil and replace filter
Every 5,000 miles (8,000 km)
Check air filter restriction gauge (replace air filter as
required or when air filter restriction gauge indicates)
Inspect brake system
Rotate tires, inspect tires for wear and measure tread
depth and inspect wheel ends for endplay and noise
Inspect and lubricate steering and suspension ball joints
Every 10,000 miles (16,000 km) or
400 hours of engine operation
(whichever comes first)
Change engine-mounted fuel filter and chassis-mounted
(FCM) fuel filter
Every 15,000 miles (24,000 km) or
600 hours of engine operation
(whichever comes first)
Check the Nitrite level of the coolant using Fleetguard
°
DCA4 Test Strip Kit CC2602A to determine if recharge is
required. If the Nitrite level is above 800 ppm no action
is required. If the Nitrite level is 800 ppm or lower add
32 fl. oz. (946 mL.) of Supplemental Coolant Additive
Motorcraft VC-8 or equivalent.
Every 30,000 miles (48,000 km)
Replace wheel bearing grease and grease seals on 4x2
wheel bearings (if non-sealed bearings)
Every 30,000 miles (48,000 km) or
1200 hours of engine operation
(whichever comes first)
Check the Nitrite level of the coolant using Fleetguard
°
DCA4 Test Strip Kit CC2602A to determine if recharge is
required. If the Nitrite level is above 800 ppm no action
is required. If the Nitrite level is 800 ppm or lower add
32 fl. oz. (946 mL.) of Supplemental Coolant Additive
Motorcraft VC-8 or equivalent.
Every 45,000 miles (72,000 km) or
1800 hours of operation (whichever
comes first)
Flush & refill engine coolant (refer to Motorcraft Premium
Gold Engine Coolant Change Record) – Do not add
Supplemental Coolant Additive
As required
Replace cabin air filter, if equipped
Note:
When adding supplemental coolant additive, do not exceed the
specified maximum of 32 fl. oz. (946 mL). Operating the engine with
excessive supplemental coolant additive can cause severe engine
damage.
2009 Econoline
(eco)
Supplement, 2nd Printing
USA
(fus)
Scheduled Maintenance: E-Series
77