2009 Ford Focus Owner Guide 2nd Printing - Page 71

Locks and Security Deactivating/activating autounlock feature Your vehicle comes with the autounlock features activated; there are three methods to enable/disable this feature: • Through your authorized dealer, • by using a power door unlock/lock sequence • or by using the instrument cluster message center. Refer to Message center in the Driver Controls chapter. Note: The autounlock feature can be activated/deactivated independently of the autolock feature. Power door lock switch autounlock enable/disable procedure Before starting, ensure the ignition is in the off position and all vehicle doors are closed. You must complete Steps 1-5 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, wait a minimum of 30 seconds before beginning again. 1. Place the key in the ignition and turn the ignition to the on position. control 2. Press the power door on the door panel three times. 3. Turn the ignition from the on position to the off position. control 4. Press the power door on the door panel three times. 5. Turn the ignition back to the on position. The horn will chirp one time to confirm programming mode has been entered and is active. 6. To enable/disable the autounlock feature, press the lock control, then press the unlock control. The horn will chirp once if autounlock was deactivated or twice (one short and one long chirp) if autounlock was activated. 7. Turn the ignition to the off position. The horn will chirp once to confirm the procedure is complete. 71 2009 Focus (foc) Owners Guide, 2nd Printing USA (fus)