2010 Ford Edge Scheduled Maintenance Guide 2nd Printing - Page 22
2010 Ford Edge Manual
Page 22 highlights
NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 90,000 miles ❑ Change engine oil and replace oil filter ❑ Inspect automatic transmission fluid level on vehicles if equipped with dipstick. Consult your dealer for your particular requirements. Replace cabin air filter (if equipped) Replace climate-controlled seat filter (if equipped) Replace engine air filter Replace fuel filter (except Escape, Mariner, F-Series [non Super Duty], Expedition/Navigator [short wheel base only], E-Series and Transit Connect) Replace spark plugs Inspect steering linkage, ball joints, suspension, tie rod ends, driveshaft, and U-joints (lubricate if equipped with Zerk fittings) Torque the rear U-bolts (Transit Connect only) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect accessory drive belts Inspect and lubricate 4x4 front axle U-joints Rotate tires, inspect tires for wear and measure tread depth Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 97,500 miles Change engine oil and replace oil filter Inspect cabin air filter (if equipped) Rotate tires, inspect tires for wear and measure tread depth Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) RO#: DATE: DEALER VALIDATION: P&A CODE: MILEAGE: 22 Scheduled Maintenance 2010 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 2nd Printing USA (fus)