2010 Ford Transit Connect Passenger Owner's Manual - Page 69

Locks and Security Programming spare keys You can program your own coded keys to your vehicle. Please read and understand the entire procedure before you begin. The process for programming Securilock keys is independent of the process for programming Remote Entry Transmitters. If your vehicle is fitted with Securilock and Remote Entry, you must perform both learning procedures in order to program both the Immobilizer and Remote Locking functions of the key fob. Tips: • A maximum of eight keys can be coded to your vehicle. • Only use SecuriLock keys. • You must have two previously programmed coded keys (keys that already operate your vehicle's engine) and the new unprogrammed key(s) readily accessible. • If two previously programmed coded keys are not available, you must take your vehicle to your authorized dealer to have the spare key(s) programmed. 1. Insert a previously programmed coded key into the ignition. 2. Turn the ignition from the O (off) position to the II (on) position. Keep the ignition in the II (on) position for at least one second, but no more than 10 seconds. 3. Turn the ignition to the O (off) position. 4. Remove the previously programmed coded key from the ignition. 5. After three seconds but within 10 seconds of removing the previously programmed coded key, insert the other previously programmed coded key into the ignition. 6. Turn the ignition from the O (off) position to the II (on) position. Keep the ignition in the II (on) position for at least one second but not more than 10 seconds. 7. Turn the ignition to the O (off) position. 8. Remove the previously programmed coded key from the ignition. 69 2010 Transit Connect (tst) Owners Guide, 3rd Printing USA (fus)