2011 Ford Escape Owner Guide 4th Printing - Page 95

Locks and Security Status menus will include the remote start system as an additional key in the total count. See the Check MyKey௡ System Status section. Note: For all vehicles with remote start installed, it is possible to program all original vehicle keys as MyKeys௡, in which case, you will need to use your remote start system to reset all MyKeys௡ as admin keys by doing the following: 1. Enter the vehicle, close all doors. 2. Remote start the vehicle using your remote start fob. 3. Follow Steps 1-4 in the Clear MyKey௡ section. Troubleshooting Condition Can't create a MyKey௡ Potential Causes • Key in the ignition is already a MyKey௡ • Key in the ignition is the last remaining admin key (there always has to be at least one admin key) • SecuriLock௡ Passive Anti-Theft System is disabled or in unlimited mode • Vehicle has been started using a remote start system that is programmed as MyKey௡. Refer to Using MyKey௡ with Remote Start Systems section. • Key in the ignition is a MyKey௡ • No MyKeys௡ are programmed to the vehicle. Refer to Create a MyKey௡ section • Vehicle has been started using a remote start system that is programmed as MyKey௡. Refer to Using MyKey௡ with Remote Start Systems section. Cannot program the MyKey௡ optional settings 95 2011 Escape (204) Owners Guide, 4th Printing USA (fus)