2011 Ford Explorer Owner Guide 4th Printing - Page 86

Lights 4. Rotate the bulb socket counterclockwise and remove it from the lamp assembly. 5. Pull the bulb straight out of the socket. Reverse steps to reinstall bulb(s). Replacing turn/backup lamp bulbs The turn/backup lamp bulbs are located in the same area of the tail lamp assembly, one below the other. Follow the same steps to replace these bulbs: 1. Make sure the headlamp switch is in the off position, then open the liftgate to expose the lamp assembly bolts. 2. Remove the two bolts covers using a standard flat tip screwdriver. 3. Remove the two bolts from the lamp assembly. 4. Carefully remove the lamp assembly away from the vehicle by pulling the assembly straight out to expose the bulb socket. 86 2011 Explorer (exp) Owners Guide, 4th Printing USA (fus)