2011 Ford Fusion Owner Guide 3rd Printing - Page 68

Lights For passenger side replacement of the front park/turn signal bulb, do the following: 1. Turn the steering wheel left to gain access to the wheel well. 2. Remove the press pins located in the wheel well and pull the splash shield back. 3. Remove the bulb socket by rotating it counterclockwise, then pull it straight out of the lamp assembly. Replace with a new bulb, and reverse the removal steps to complete the process. Replacing front side marker bulbs 1. Make sure the headlamp control is in the off position. 2. From underneath the vehicle, partially remove the tire splash shield by removing the press pins. After removing to allow free access to the front side marker lamp bulb and electrical wire harness, the splash shield should be able to be repositioned. 3. Rotate the lamp clockwise while holding the electrical connector in place. After rotating the lamp 90 degrees clockwise, pull and disengage the wire harness and bulb from the lamp. 68 2011 Fusion (fsn) Owners Guide, 3rd Printing USA (fus)