2012 Ford Escape Owner Guide 2nd Printing - Page 223

Driving Note: For some markets, this feature will be disabled. If the fuse is not blown, perform the following procedure: 1. Apply the parking brake, turn the ignition to off, then remove the key. 2. Using a screwdriver or similar tool, carefully pry out the small Brake Transmission Shift Interlock (BTSI) cover cap located to the right of the gearshift lever. 3. Insert a screwdriver or similar tool straight down into the access hole and press downward while pulling the gearshift lever out of the P (Park) position and into the N (Neutral) position. 4. Remove tool and reinstall the BTSI cover cap. 5. Start the vehicle and release the parking brake. WARNING: Do not drive your vehicle until you verify that the brakelamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure. Use wheel chocks if appropriate. WARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized dealer as soon as possible. 223 2012 Escape (204) Owners Guide, 1st Printing USA (fus)