2012 Ford Flex Owner Guide 2nd Printing - Page 165

Seating and Safety Restraints running, the battery saver will turn it off after 10 minutes. You can reactivate the power seats by pressing on the remote entry key fob or by using the unlock procedure on the keyless entry keypad. Refer to SecuriCode™ keyless entry system in the Locks and Security chapter. Keeping the key in accessory or run positions will prevent the feature from timing out. 1 2 3 4 FOLD RH BOTH NORMAL STOW TAILGATE LH Press the seat selection button (4) to select either right-hand seat, the left-hand seat or both. First select the seat you would like to adjust, then select one of the following: • Press the NORMAL button (1) to return the seat to the normal seating position. • Press the STOW button (2) to stow the seat into the tub floor. • Press the FOLD button (3) (the top portion of the button) to fold down the seatback. • Press the TAILGATE button (3) (the bottom portion of the button) to put the seat into the tailgate position. Note: Pressing a different button while the power seat feature is already being performed may cause the first selected seat movement to be cancelled. Allow the first seat movement to be completed before pressing a button for another function. Note: Ensure that there are no objects such as books, purses or brief cases on the load floor before unstowing the seat. Failure to remove all objects from the top of the load floor prior to unstowing it may cause damage to the seat. Note: In order to allow the seat to complete the stowed position, do not place objects under the seat before stowing. Remove all objects from the seat and stowage tub. Sharp objects may result in damage to the seat upholstery and improper seat function. 165 2012 Flex (471) Owners Guide, 2nd Printing USA (fus)