2013 Ford Transit Connect Cargo Owner Manual Printing 2 - Page 124

Transmission Brake-Shift Interlock 123 WARNING: Do not drive your vehicle until you verify that the brake lamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure. Use wheel chocks if appropriate. WARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized dealer. This vehicle is equipped with a brake-shift interlock feature that prevents the gearshift lever from being moved from P (Park) when the ignition is in the on position unless the brake pedal is pressed. If you cannot move the gearshift lever out of P (Park) with ignition in the on position and the brake pedal pressed, it is possible that a fuse has blown or the vehicle's brake lamps are not operating properly. Refer to the Fuses chapter for more information. If the fuse is not blown and the brake lamps are working properly, the following procedure will allow you to move the gearshift lever from P (Park): 1. Apply the parking brake, turn ignition key to off, then remove the key. 2. Using a flat head screwdriver, remove the plastic cover. 3. Insert the ignition key and push it straight down to release the interlock. 4. Apply the parking brake, then shift to N (Neutral). 5. Start the vehicle. Note: Starting the vehicle in N (Neutral) still 2 requires following the steps in the 1 Preparing to start your vehicle section. 6. To drive, with the brake pedal still pressed, release the parking brake and shift to D (Drive) or R (Reverse). See your authorized dealer as soon as possible if this procedure is used. 2013 Transit Connect (tst) Owners Guide gf, 2nd Printing, November 2012 USA (fus)