2014 Ford E350 Super Duty Passenger Owner Manual Printing 1 - Page 102

Seats B 101 4. With assistance, pull the seat latch release straps (A) (located behind the latch mechanisms) to release the latch from the rear strikers. C A A 5. Lift the rear end of the seat upward and rearward by pushing on the seat back (B) and lifting the seat cushion (C) to disengage the front seat hook and the rear seat latch from the striker. 6. With assistance, remove the seat assembly. • To remove the third, fourth, and fifth row seats (if equipped), repeat Steps 1 through 6. WARNING: Make sure that the seat is installed or removed from the striker pins with adequate ergonomic assistance. Due to the weight of the seat, it must be handled by at least two adults during installation or removal from the vehicle. WARNING: Make sure that the seat is latched to the vehicle floor by pushing and pulling on the seat or seat back (B). If not latched, the seat may cause injury during a sudden stop. To install the seat: 1. Make sure the floor striker area is clean of any debris that would prevent the seat from latching. 2. With assistance, position the seat in the vehicle. 3. Align the front hooks to the front striker pins prior to lowering the rear latch mechanism and aligning them with the rear striker pins. 4. Engage the front hooks to the front striker pins. 5. After the front hooks are engaged to the front striker pins, pull the seat latch release straps to allow engagement of the latch to the striker pins. 6. Pull and push the seat back forward and backward to check for proper seat installation. 2014 Econoline (eco) Owners Guide gf, 1st Printing, November 2012 USA (fus)