2014 Ford Expedition Quick Reference Guide Printing 1 - Page 6

CONVENIENCE MyKey® MyKey allows you to program certain driving restrictions in order to promote good driving habits. You can program things such as speed restrictions and limited volume levels. For complete information, refer to the MyKey chapter in your Owner's Manual. COMFORT SecuriCode™ Keyless Entry keypad Lock or unlock the doors, or release the liftgate glass without using a key. The keypad can be operated with the factoryset, 5-digit entry code; this code is located on the owner's wallet card in the glove box. You can also create up to five of your own 5-digit personal entry codes. To lock all of the doors and liftgate Press and hold 7•8 and 9•0 at the same time. For complete information, refer to the SecuriCode Keyless Entry Keypad in the Locks chapter of your Owner's Manual. Memory Feature* The memory function will save and recall the positions of the driver seat, power mirrors and adjustable pedals. Use the memory controls located on the left side of the driver's seat to program and then recall memory positions. To program 1.  Switch the ignition on. 2.  Move the memory features to your desired position. 3.  Press and hold the 1 button you hear a tone. until Seating-to-Cargo Versatility Note: Before folding the second- or third-row seats, make sure that the head restraints are fully flipped down by pulling on the strap, and that all items have been removed from the floor and seats. E-Z Entry into the Third-row Seats The E-Z entry seat allows for easier entry and exit to and from the third-row seat. Pull Strap Integrated Keyhead Transmitter Press once to lock all doors. Press again to confirm all doors are closed. • Press once to unlock the driver's door. Press again within three seconds to unlock all doors. • Press to activate the panic alarm. Press again or turn the ignition on to deactivate. • Press twice within three seconds to unlatch the liftgate window. With a power liftgate* , however, this button will open or close the power liftgate or reverse its movement instead of the liftgate window. • Car finder: Press twice within three seconds to locate your vehicle. The horn will chirp and the turn lamps will flash. To fold the Flat-folding Third-row Seats To the Load Floor Pull up on the Handle located behind the seatback while pushing the seatback forward and down into the seat cushion. Note: A moderate force may be required to move the seat forward and down. To return the seats to an upright seating position Lift and pull the seat rearward until the latch is fully engaged. Handle To enter the third-row seating area 1. Fold the head restraint forward. 2. Pull up on Lever 1. 3.  Fold down the second-row seat and release the handle. 4.  Pull the handle up again until the seat releases from the floor. 5.  Push the seat upward and fold it away from the third row. To return the seat to an upright seating position 1.  Push the seat down and latch it to the floor. 2.  Bring the seatback to an upright position. It should lock into position. 3.  Lift up on the head restraint until it locks into its original position. Lever 1 Position 2 Rain-sensing Wipers* If activated, your wipers will automatically turn on when moisture is present on the windshield. The wiper speed will vary based on the amount of moisture detected and the sensitivity setting. To deactivate, turn your wiper controls off. Note: Make sure that this feature is turned off before entering a car wash. Use this same procedure to set the second position using the 2 button . You can now use these controls to recall the set memory positions. SOS post-crash alert system™ The SOS Post-Crash Alert System provides audible and visual alarms in the event of a crash. The turn signals will flash and the horn will sound. To deactivate the system, press the hazard flasher control, or you can press on your remote transmitter. Position 3 page 10 *if equipped page 11