2014 Ford Explorer Quick Reference Guide Printing 1 - Page 10
2014 Ford Explorer Manual
Page 10 highlights
Comfort Heated and cooled front seats* co ntinue d Memory function* restraint down while pressing and holding the guide sleeve adjust/release button. Tilt the head restraint for additional comfort by gently pulling the top of the head restraint forward. Once it is in the forward-most position, tilting it forward once more will release it to the upright position. NOTE: Do not attempt to force the head restraint backward after it is tilted. Instead, continue tilting it forward until the head restraint releases to the upright position. Allows one-touch recall of memory positions for the driver seat, power mirrors, steering column and poweradjustable foot pedals. Use the memory controls located on the driver's door to program and then recall memory positions. To program position 1, press and hold the 1 button until you hear a chime. Use this same procedure to set positions 2 and 3 using the respective buttons. You can now use these controls to recall the set memory positions. PowerFold® third-row seat* NOTE: The PowerFold seats work only when the vehicle is in P (Park) and the liftgate is open. To access heated seats and cooled seats on touchscreen-equipped vehicles, press the Climate corner on your touchscreen. Press the heated or cooled seat icon repeatedly to cycle through the various heat or cool modes and off. For non-touchscreen vehicles, use the hard button controls (indicated by the same symbols). Press the controls repeatedly to cycle through the various heat or cool modes and off. Indicator lights on the control will show what settings you have selected. Tilting Head restraints Second-row heated seats* To operate, press the button located on the rear of the floor console to cycle through the various heat settings and off. Warmer settings are indicated by more indicator lights. Note: The heated seats operate only when the ignition is on. If activated, they will turn off automatically when the engine is turned off. The third-row seat features a power one-touch operation that allows you to fold and stow the seats. The buttons are located behind the third-row seats on the left-side quarter trim panel. To use, press the RH/BOTH/LH button to select the right-side seat, the left-side seat or both seats you want to move. Then, select the desired seat position: • Press the STOW button to stow the seat into the tub floor. • Press the FOLD button (the top portion of the button) to fold down the seatback. • Press the NORMAL button to return the seat to the normal seating position. Your vehicle's front-row head restraints can be adjusted. Pull up to raise the head restraint. To lower, press the head * (if equipped) * (if equipped) 18 19