2014 Ford Mustang Shelby GT500 Supplement Printing 1
2014 Ford Mustang Manual
2014 Ford Mustang manual content summary:
- 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 1
2014 MUSTANG SHELBY GT 500 Supplement fordowner.com ford.ca ER3J 19A285 AA | December 2012 | First Printing | Supplement | Mustang | Litho in U.S.A. - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 2
through water Washing your vehicle 5 11 12 12 12 13 15 16 16 20 20 22 23 24 25 25 Wheels and Tires Wheels Wheel lug nut torque Tire information 26 26 26 27 Roadside Emergencies Wrecker towing 30 30 Maintenance Engine oil Air filter(s) 35 36 41 1 2014 05+ Mustang (197) Supplement, 1st - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 3
42 43 Warranty Coverage Scheduled Maintenance Guide Normal scheduled maintenance and log 46 47 52 Index 62 The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 4
and specifications unique to your new SVT vehicle. If there are any discrepancies between this supplement and the Mustang Owner's Manual, this supplement shall supersede the information found in the Mustang Owner's Manual. 3 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 5
200000 SVT vehicles produced since the 1993 model year has been designed and developed with the four SVT Hallmarks in mind: Performance, Substance, Exclusivity and Value. These hallmarks have driven the SVT Mustang Cobra and the Cobra R, the SVT F-150 Lightning, the SVT Contour, the SVT Focus, Ford - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 6
, thermostatically controlled air-to-oil axle, transmission, and engine cooler included on the SVT Track Pack (optional) • Cast aluminum structural oil pan and piston oil squirters • Low-restriction, cold air intake system • SVT-tuned 2.75-inch exhaust system with Quad 3.5 inch tips • Electronically - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 7
steering (EPAS) • SVT designed seats with over the top stripes and increased lateral support • Optional race inspired RECARO® front seats with increased lateral support on back and cushion, unique Shelby GT500 trim cover, integrated head restraint, and driver four-way manual adjuster. See the Seats - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 8
GT500® Unique Features Vehicle Specifications Drivetrain Item Transmission Driveshaft Rear axle Description TREMEC TR6060 6-speed manual with integral clutch housing and 260 mm twin disk clutch 1-piece carbon fiber 8.8 inch solid rear axle with standard limited-slip differential and optional TORSEN - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 9
steel Bore x Stroke Displacement Compression ratio Horsepower on 93 octane fuel Torque on 93 octane fuel Redline Specific output Valvetrain Ignition Fuel system Mass air sensor Throttle body Pistons Crankshaft Connecting rods Supercharger Exhaust manifolds Exhaust system 8 2014 05+ Mustang (197 - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 10
and 35.0 N/mm rear 33.2 x 5.0 mm tubular standard and optional Coupe stabilizer bars (front) Coupe stabilizer bars (rear) Coupe spring rates (standard) Coupe spring rates (optional) Convertible stabilizer bars (front) 9 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 11
® GT500® Unique Features Item Convertible stabilizer bars (rear) Convertible spring rates (standard) Convertible spring rates (optional) Description 23 mm solid standard and optional 32.5 N/mm front and 30.5 N/mm rear 34.0 N/mm front and 31.5 N/mm rear 10 2014 05+ Mustang (197) Supplement, 1st - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 12
EQUIPPED) WARNING: Position the safety belt guide so that the belt rests across the the front safety belts can be used with the belt guide. Route the safety belt so that the belt rests across the middle of your shoulder. 11 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 13
have been satisfied prior to customer delivery, full power will not be available. MANUAL 6-SPEED TRANSMISSION OPERATION Using the Clutch The manual transmission has a starter interlock that prevents cranking the engine unless the clutch pedal is fully pressed. To start the vehicle: 1. Make sure the - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 14
vehicle is equipped with a twin disc clutch. Due to the high performance of the powertrain, a certain amount of noise from the transmission is normal. Clutch Protection Your vehicle 43 mph (69 km/h) 1 2 3 4 5 - 2 3 4 5 6 13 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 15
of sustained high speeds and track day driving. All Shelby GT500's are equipped with tires rated for the vehicle's maximum speed. Remember to drive safely, obey all traffic laws and only operate your SVT vehicle at high speeds at locations equipped and designed to do so safely. Before operating - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 16
be adjusted from 1500-7000 rpm in the Settings/Vehicle menu. See the Information Displays chapter in your Owner's Manual for more information. Unique Instrument Cluster Lighting For instructions on how to set the instrument cluster display color or MyColor®, refer to the Information Displays chapter - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 17
the Information Displays chapter of your Owner's Manual for more information on Track Apps. ADVANCETRAC® MODE The AdvanceTrac® system provides an available sport mode specially calibrated for the GT500's unique performance enabled. 16 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 18
2014 05+ Mustang (Single press) double tap) vehicle stopped and foot on brake Drag Start Normal ON Calibration •LC UNAVAILABLE •TC On Drag Start •TC OFF Calibration •LC ON •LC RPM ONLY •LC ON Launch control setting does not turn ON/OFF with key cycle. Launch control engine RPM setpoint range available - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 19
when AdvanceTrac® SPORT or OFF is selected. If equipped with optional electronically selectable dampers (ESD), damping setting does not turn ON/ Shelby® GT500® 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) Mode 2 Mode 3 Mode 4 AdvanceTrac mode descriptions and usage • - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 20
button and single tap AdvanceTrac button. Press launch control button. Mode 6 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) Mode 7 engine rev limiter, if •Two stage RPM control with vehicle is stationary, with no Traction Control Off traction assist for drag strip - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 21
be changed in the Track Apps menu using the 5-way button. Detailed description of operation modes and recommended usage is outlined in the AdvanceTrac section. Launch control is engineered to be used with the original equipment provided on your GT500. Any modifications to the vehicle may adversely - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 22
floor. The engine will hold set RPM. 6. Quickly and smoothly release the clutch while maintaining pressure on the accelerator. 7. Upshift normally. To change the RPM setting: 1. Go to TRACK APPS>LAUNCH CONTROL>RPM Setting. 2. Choose the desired launch RPM. 3. Follow the on-screen prompts. View/Clear - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 23
® GT500® OPTIONAL SVT TUNED ELECTRONICALLY SELECTABLE DAMPERS (ESD ) Press the center button to select the damper setting or through the information display. See LC Information Displays in the Owner's Manual for more information. If equipped with the SVT Performance Package, your vehicle's dampers - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 24
Driving your Shelby® GT500® ENGINE OVER-REV Note: Engine torque and maximum rpm are limited until coolant temperature reaches 170°F (77°C). Warm up is indicated when the redline indicator band starting point changes from 6250 rpm to 7000 rpm. Your vehicle is equipped with an over-rev feature to - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 25
curbs, SVT recommends approaching at a 45 degree angle to reduce the risk of vehicle damage. The Shelby GT500 carries the same warranty as other Ford Mustang models. Damage caused by accidents, collision or objects striking the vehicle (including driving through a car wash) or misuse of the vehicle - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 26
may enter through the air intake due to the vacuum generated in the engine. Damage caused by the intake of water in the engine is not covered by the warranty. WASHING YOUR SHELBY GT500 Do not drive your vehicle through an automated, commercial car wash due to the vehicle's low ground clearance, tire - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 27
tire pressure (see Tires in this supplement). • Do not drive your vehicle through an automated, commercial car wash due to the vehicle's low ground clearance, tire width and track. Wash your vehicle by hand, or by using a touchless commercial wash with no mechanical tracks on the floor. Do not use - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 28
19 in. x 9.5 in. front, 20 in. x 9.5 in. rear forged aluminum wheels Tires Your SVT vehicle is equipped with low profile, high performance tires that are designed to optimize the driving dynamics you expect in a SVT vehicle. These tires are not optimized for off-road or winter (snow or cold weather - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 29
as a set of four. Never mix tire brands. WARNING: For vehicles equipped with performance package tires (P265/40-19 front, P285/35-20 rear), only replace pressure could lead to a loss of vehicle control leading to serious injury or death. 28 2014 05+ Mustang (197) Supplement, 1st Printing, - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 30
are directional. Tire rotation is not recommended for directional tires. Note: If your tires show uneven wear, ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problems. 29 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 31
must be used when loading/unloading your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Note: If the vehicle is towed by other means or incorrectly, vehicle damage may occur. 30 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 32
two mini J hooks and attach them to the crossmember oblong holes as shown to winch the vehicle onto the flatbed. The T-hook slot should be used to tie-down the vehicle to the wrecker. Other methods may damage the vehicle. 31 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 33
the front tires must be 16 inches (41 centimeters) higher than the rear. When towing the vehicle from the rear, wheel dollies must be used. The rear tires must be 12 inches (31 or driveway approaches to prevent any damage. 32 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 34
following diagram illustrates the maximum ramp angle allowable to load your vehicle on a flatbed. Vehicle damage may occur with greater angles. Blocks or ramps must be used to achieve appropriate undercarriage clearances. 33 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 35
Roadside Emergencies Alternate method C B A A. 36 inches (91 centimeters) 4 inch x 4 inch loading block B. 18 inches (46 centimeters) 4 inch x 4 inch loading block C. 11.5 degrees maximum 34 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 36
system G. Electric intercooler pump H. Intercooler coolant reservoir I. Engine coolant reservoir J. Engine oil filler cap K. Powertrain control module L. Windshield washer reservoir M. Power distribution box 35 K I H F E 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 37
covered by Ford warranty. Change your engine oil and filter according to the appropriate schedule listed in the scheduled maintenance information. CHECKING THE ENGINE OIL See the scheduled maintenance information for the appropriate intervals for checking the engine oil. 1. Make sure the vehicle is - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 38
hole. Oil levels above this range may cause engine damage. Some oil must be removed from the engine by an authorized dealer. 7. Put the dipstick back in and make sure it is between -30°F (-34°C) and -34°F (-37°C). 37 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 39
would not be covered under your vehicle's warranty. Note: During normal vehicle operation, the engine coolant may change color from orange to pink or light red. As long as the engine coolant is clear and uncontaminated, this color change does not indicate the engine coolant has degraded nor does it - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 40
's cooling system. The use of an improper coolant may harm engine and cooling system components and may void the warranty. • In case of emergency, a large amount of water without engine coolant may be added in order to reach a vehicle service location. In this instance, the cooling system must be - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 41
is an important part of the proper maintenance and optimal performance of this vehicle. The use of gasoline with an octane rating lower than 91 can lead to severe mechanical damage to your vehicle, may degrade vehicle performance, and may affect your warranty coverage. 91 40 2014 05+ Mustang (197 - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 42
reduce the risk of vehicle damage or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. See scheduled maintenance information for the appropriate intervals for changing the air filter element. When changing the air filter - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 43
Capacities and Specifications MOTORCRAFT PART NUMBERS Component Air filter element Fuel filter Battery Oil filter Spark plugs 5.8L Supercharged V8 engine FA-1896 FG-1083 BXT-96R-590 FL-820S CGSF-12YP 0.033 - 0.037 inches (0.85 - 0.95 mm) 42 2014 05+ Mustang (197) Supplement, 1st Printing, December - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 44
High Performance DOT 3 or DOT 4 LV Motor Vehicle Brake Fluid Ford part number / Ford specification PM-1-C (US) / CPM-1-C (Canada) WSS-M6D65-A1 or PM-20 / WSS-M6C65-A2 Engine oil without cooler (with filter change) Engine oil with cooler (with filter change) 8.5 quarts (8.0L) Motorcraft® 5W-50 Full - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 45
) Motorcraft® MERCON® V ATF Transmission fluid without cooler3,4 Transmission fluid with cooler3,4 XT-5-QM / MERCON® V 16.0 gallons (60.5L) - - Capacity Ford part name or equivalent Ford part number / Ford specification Capacities and Specifications 2014 05+ Mustang (197) Supplement, 1st Printing - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 46
Capacities and Specifications USING THE RIGHT BULBS Function Park lamp, turn lamp, side marker (front) Fog lamp Trade number 3156K PS24N 45 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 47
as other Ford Mustang models. This information is covered in its entirety in the warranty information. Warranty service for the Shelby GT500 or any SVT vehicle can be obtained at any Ford dealer nationwide. SVT does not recommend modifying or racing SVT vehicles, as they are designed and built - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 48
one stop shopping. They can perform any services that are required on your vehicle, from general maintenance to collision repairs. Note: Not all dealers have extended hours or bodyshops. Please contact your dealer for details. 47 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 49
recommended maintenance intervals for various parts and component systems based upon engineering testing. Ford Motor Company relies upon this testing to determine the most appropriate mileage for replacement of oils and fluids to protect your vehicle at the lowest overall cost to you and recommends - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 50
Guide Owner Checks and Services Certain basic maintenance checks and inspections should be performed every month or at six month intervals. Check every month Engine oil level. Function of all interior and exterior lights . 49 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 51
, manual and automatic transmission (with an underhood dipstick), power steering (if equipped) and window washer ** * If your vehicle is equipped with a temporary mobility kit, check the tire sealant expiration Use By date on the canister. Replace as needed. Be sure to ask your dealership service - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 52
Scheduled Maintenance Guide 51 2014 05+ Mustang (197) Supplement, 1st Printing, December 2012 USA (fus) - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 53
Scheduled Maintenance Guide NORMAL SCHEDULED MAINTENANCE AND LOG The following section contains the Normal Schedule. This schedule is presented at specific mileage (kilometer) intervals with exceptions noted. Normal Scheduled Maintenance Every 7500 miles Change engine oil and filter. (12000 km) or - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 54
45000 miles Replace spark plugs. (72000 km) Every 105000 miles Change engine coolant.* (168000 km) Inspect accessory drive belt(s).** Every 150000 miles Change manual transmission fluid. (240000 km) Change rear axle fluid. Replace accessory drive belt(s) if not replaced within the last 100000 miles - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 55
DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 54 2014 05+ Mustang (197) Supplement, 1st Printing - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 56
DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 55 2014 05+ Mustang (197) Supplement, 1st Printing - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 57
DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 56 2014 05+ Mustang (197) Supplement, 1st Printing - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 58
for abnormal noise, wear, looseness or drag. Every 5000 miles Change engine oil and filter. (8000 km) or six Inspect CV joint boots for loose clamps, damage months or grease leakage. Every 50000 miles Change manual transmission fluid. (80000 km) 57 2014 05+ Mustang (197) Supplement, 1st Printing - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 59
Guide Special Operating Condition Log DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 60
DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: RO#: DATE: P&A CODE: HOURS: MILEAGE: 59 2014 05+ Mustang (197) Supplement, 1st Printing - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 61
oil change service interval is 3000 miles (4800 kilometers). Engine air filter replacement: Engine air filter life is dependent on exposure to dusty and dirty conditions. Vehicles operated in these conditions require frequent inspection and replacement of the engine air filter. 60 2014 05+ Mustang - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 62
Maintenance Guide ENGINE COOLANT CHANGE RECORD Initial change After initial change Six years or 105000 miles (168000 km) (whichever comes first) Every three years or 45000 miles (72000 km) Engine Coolant Change Log DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 63
selectable dampers ...22 Engine ...8 refill capacities ...43 service points ...35 Engine oil filter, Lights, warning and indicator ...14 Lug nuts ...26 M Manual transmission fluid capacities ...43 Motorcraft® parts ...42 O Octane rating ...40 P Parts (see Motorcraft® parts) ..42 2014 05+ Mustang - 2014 Ford Mustang | Shelby GT500 Supplement Printing 1 - Page 64
Index S Scheduled Maintenance Guide Normal Scheduled Maintenance and Log ...52 Spark plugs, specifications ...8, 42 T Tires changing ...27 Towing wrecker ...30 Transmission fluid, refill capacities ...43 W Warning lights (see Lights) ...14 Wrecker towing ...30 63 2014 05+ Mustang (197) Supplement,
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
 |
 |
ER3J 19A285 AA
|
December 2012
|
First Printing
|
Supplement
|
Mustang
|
Litho in U.S.A.
2014
MUSTANG SHELBY GT 500
Supplement
fordowner.com
ford.ca