2015 Ford C-MAX Hybrid Energi Quick Reference Guide Printing 1 - Page 9

comfort HEATED SEATS* 1 function MANUAL LIFTGATE To open the liftgate manually from outside of your vehicle, press the control located in the top of the liftgate pull cup handle. This unlatches the liftgate. Then, pull on the outside handle. You can also use the transmitter to unlock your liftgate. Press twice within three seconds. Use the molded handle inside the liftgate to help with closing. DUAL ZONE TEMPERATURE CONTROL With dual controls, you have the flexibility to operate the temperature with one control, called single zone, or two, where both driver and front passenger can select independent temperatures using their own rotary dials. To operate the dual zone temperature control: Use the rotary control on the passenger side. Single zone temperature control automatically turns off. To return back to single zone: Press and hold the AUTO button. The passenger side temperature automatically turns to the driver side temperature setting. The front heated seat controls are on the center console near the gearshift lever. Rotate the dial to select your preferred heat mode. HANDS-FREE POWER LIFTGATE* To open your liftgate hands-free while you are at the liftgate: Move your foot under and away from the rear bumper, using a single kicking motion. Do not move your foot sideways or the sensors may not detect the motion. The liftgate power opens or closes. NOTE Your intelligent access transmitter must be within 3 feet (1 meter) of the liftgate for the feature to work. The liftgate may not power open or close under specific conditions. Refer to the Locks chapter in your Owner's Manual for more information. 2 POWER LIFTGATE* You can open the power liftgate from the instrument panel , or with your transmitter by pressing by pressing twice within three seconds. If the vehicle is running, the liftgate operates only with the transmission in park (P). Three warning tones sound once as the liftgate begins to power close. Five short tones indicate a problem with the open or close request, caused when: » The ignition is on and the transmission is not in park (P). » The battery voltage is below the minimum operation voltage. » The vehicle speed is at or above 3 mph (5 km/h). TO FOLD THE REAR SEATBACK 1.  Fold the outboard head restraints and lower the center head restraint. 2.  Pull the lever up to fold the seatback forward. To unfold the seatback, simply pull up on the seatback to raise it to the upright position. 16 *if equipped *if equipped 17