2015 Ford Expedition EL Quick Reference Guide Printing 1 - Page 9

2015 Ford Expedition EL Manual

Page 9 highlights

COMFORT (CONTINUED) POWERFOLD® THIRD-ROW SEAT* Note: The power-folding seats operate for 10 minutes after you switch the ignition off. The transmission must be in park (P) and the liftgate or liftgate glass must be open. COMFORT (CONTINUED) MOONROOF* The moonroof control is on the overhead console. It has a one-touch open and close feature. To stop its motion during the one-touch operation, press the control a second time. To open, press and release the SLIDE control. It stops short of the fully opened position to help reduce wind noise. Press the SLIDE control again to fully open the moonroof. To close, pull and release the SLIDE control. To vent, press and release the TILT control. Pull and hold the TILT control to close the moonroof. Once you close the moonroof, you can still open or close the sliding shade manually. Pull the shade toward the front of the vehicle to close it. AMBIENT LIGHTING* When activated, ambient lighting illuminates key areas of your interior with a choice of colors. To access and make adjustments 2. Touch the desired color. 3. Use the scroll bar to increase or decrease the intensity. To turn the feature on or off, press the power button. 1. Press the Settings icon > Vehicle > Ambient Lighting. MEMORY FEATURE* The memory function saves and recalls the positions of the driver seat, power mirrors and adjustable pedals. Use the memory controls located on the left side of the driver's seat to program and then recall memory positions. To program 1.  Switch on the ignition. 2.  Move the memory features to your desired position. 3.  Press and hold the 1 button until you hear a tone. Use this same procedure to set the second position using the 2 button . You can now use these controls to recall the set memory positions. LEATHER CLEANING For cleaning and removing spots and stains, use Motorcraft® Premium Leather and Vinyl Cleaner** or a commercially available leather cleaning product for automotive interiors. The 60/40 split-folding bench seat uses a power-activated seatback release. Fold one side or both down for more flexibility. The controls are located on the right-hand rear quarter trim panel that is accessible from the liftgate area. Note: Make sure you unfasten all of the safety belts. To lower 1. M  ake sure you fold the head restraints down first. 2.  Press and hold the FOLD control. Release the control once the seats fold completely. 3. T  o return the seatback to its original position, press and hold the UP control. Release the control once the seats return to the upright position. Note: Test any cleaning product on an inconspicuous area first. Do not use the following products as these may damage the leather O  il and petroleum or silicone-based leather conditioners. • Household cleaners. • Alcohol solutions. •S  olvents or cleaners intended specifically for rubber, vinyl and plastics. REAR HEATED SEATS* Press the heated seat control repeatedly to cycle through the settings and off. More lights indicate a higher setting. For complete information, see the Vehicle Care chapter of your Owner's Manual. page 16 *if equipped **Do not use on the King Ranch seats. See the Vehicle Care Owner's Manual for details. *if equipped page 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

COMFORT
(CONTINUED)
AMBIENT LIGHTING*
When activated, ambient lighting illuminates key areas of your
interior with a choice of colors.
To access and make adjustments
1.
Press the Settings icon > Vehicle > Ambient Lighting.
2.
Touch the desired color.
3.
Use the scroll bar to increase or decrease the intensity.
To turn the feature on or o², press the power button.
REAR HEATED SEATS*
Press the heated seat
control repeatedly to cycle through the
settings and o². More lights indicate a higher setting.
MEMORY FEATURE*
The memory function saves and recalls the positions of the driver
seat, power mirrors and adjustable pedals. Use the memory
controls located on the leµ side of the driver’s seat
to
program and then recall memory positions.
To program
1.
Switch on the ignition.
2.
Move the memory features to your desired position.
3.
Press and hold the
1
button
until you hear a tone.
Use this same procedure to set the second position using the
2
button
.
You can now use these controls to recall the set
memory positions.
COMFORT
(CONTINUED)
POWERFOLD
®
THIRD-ROW SEAT*
The 60/40 split-folding bench seat uses
a power-activated seatback release. ±old
one side or both down for more ¶exibility.
The controls are located on the right-hand
rear quarter trim panel that is accessible
from the liµgate area.
Note:
Make sure you unfasten all of the
safety belts.
To lower
1.
Make sure you fold the head restraints
down Frst.
2.
Press and hold the
FOLD
control.
Release the control once the seats
fold completely.
3.
To return the seatback to its original
position, press and hold the
UP
control.
Release the control once the seats return
to the upright position.
Note:
The power-folding seats operate for
10 minutes a²er you switch the ignition o³.
The transmission must be in park (P) and
the li²gate or li²gate glass must be open.
LEATHER CLEANING
±or cleaning and removing spots and
stains, use Motorcraµ
®
Premium Leather
and Vinyl Cleaner** or a commercially
available leather cleaning product for
automotive interiors.
Note:
Test any cleaning product on an
inconspicuous area ´rst.
Do not use the following products as these
may damage the leather:
Oil and petroleum or silicone-based
leather conditioners.
• Household cleaners.
• Alcohol solutions.
Solvents or cleaners intended
speciFcally for rubber, vinyl
and plastics.
±or complete information, see the
Vehicle
Care
chapter of your
Owner’s Manual
.
MOONROOF*
The moonroof control is on the overhead
console. It has a one-touch open and
close feature. To stop its motion during the
one-touch operation, press the control a
second time.
To open, press and release the
SLIDE
control. It stops short of the fully opened
position to help reduce wind noise. Press
the
SLIDE
control again to fully open the
moonroof. To close, pull and release the
SLIDE
control.
To vent, press and release the
TILT
control.
Pull and hold the
TILT
control to close
the moonroof.
Once you close the moonroof, you can still
open or close the sliding shade manually.
Pull the shade toward the front of the
vehicle to close it.
page
17
page
16
*
if equipped
**Do not use on the King Ranch seats. See the Vehicle Care Owner’s Manual for details.
*
if equipped