2015 Ford Transit 350 Wagon Owner Manual Printing 3 - Page 130

Fuel and Refueling You cannot use the operator commanded regeneration if the service engine soon light is illuminated. Using the Information Display You can start operator commanded regeneration using the information display. See General Information (page 78). To start operator commanded regeneration, run the engine at normal operating temperature and scroll to: Message Action and Description Settings Exhaust Filter Full OK = Cleaning Press the OK button. Press the OK button. Select one of the following: Exhaust Filter Full Press the OK button and then follow the prompts regarding exhaust position as needed to initiate operator commanded regeneration. Be sure to understand each prompt. If you are not sure what is being asked by each prompt, contact an authorized dealer. The display will confirm the operation has started and when it has finished. Press the OK button and then follow the prompts regarding exhaust position as needed to initiate operator commanded regeneration. Be sure to understand each prompt. If you are not sure what is being asked by each prompt, contact an authorized dealer. The display will confirm the operation has started and when it has finished. Exhaust Filter Overloaded If the diesel particulate filter is near or at saturation, a message requesting permission to initiate filter cleaning will display. Message Action and Description Exhaust Filter At Limit Press the OK button and then follow the prompts regarding exhaust position as needed to initiate operator commanded regeneration. Be sure to understand each prompt. If you are not sure what is being asked by each prompt, contact an authorized dealer. The display will confirm the operation has started and when it has finished. 127 Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing