1994 GMC Suburban Owner's Manual - Page 298

Front Parkingflurn Signal Lights with Sealed Beam Headlights I . Remove the two screws at the inside edge of the parkingkurn signal light assembly. 2. Remove the light assembly by swinging it out from the inside edge and sliding itout at the outside edge. 3. Squeeze the tab on the side of the light socket while turning the socket to the left. 4. Pull the socket out of the light assembly. 5. Push in gently on the bulb, turn it to the left and remove it from the socket. 6. Put the new bulb in the socket, gently press in on the bulb and turn it to the right until it is tight. 7. Put the socket back into the light assembly and turn it socket to the right until it locks. 8. Put the parking/turn signal light assembly back into the vehicle and tighten the screws. Front Parkingflurn Signal Lights with Composite Headlights 7 1. Remove the screws and take out the parkingkurn signal light assembly. 2. Squeeze the tab on the side of the light socket while turning the socket to the left. -7 6-52