1995 GMC Jimmy Owner's Manual - Page 275

Rear Lamps 1. Open the endgate. I 2. Remove the two screws from the lamp assembly. 3 . Pull the assembly away from the fender. 4. Turn the socket counterclockwise to remove it. Push the tab in while you turn the socket counterclockwise. 5. Holding the base of the bulb, pull the bulb straight out of the socket. 6 . Push the new bulb straight into thesocket until it clicks. 7. Put the socket into the lamp assembly and turn the socket clockwise until it locks in place. 8. Install the lamp assembly and screws. 9. Close the endgate. 6-35