1996 GMC Sonoma Owner's Manual - Page 260

5. Turn the bulb counterclockwise to remove it. 6. Put the new bulb into the headlamp lens assembly and turn i t clockwise until it is tight. 7. Plug in the electrical connector. I . Reach under the bumper and behind the parking/turn signal lamp assembly. 2. Push the tab o n the socket, turn the socket counterclockwise and pull it out. 8. Put the headlamp lens assembly back into the vehicle. Install and tighten the screws. Front Turn Signal L; If you have fog lamps, the fog lamp bracket must be removed before you can replace the front parking/turn signal lamps. 3. Holding the base of the bulb, p ~ ~ l l bulb straight the out of the socket. 4. Push the new bulb into the socket until it clicks. 5 . Put the socket back into the parking/turn signal lamp assembly and turn it clockwise until it locks i n place. 6-38