1996 GMC Sonoma Owner's Manual - Page 262

Taillamps 1 . Open the tailgate. 2. Remove the screws from the lamp assembly near the tailgate latch. 4. Install a new bulb. 5. Replace the lens. Install and tighten the screws. If equipment such as a cap or camperis installed on your vehicle, a center high-mounted stoplamp feed wire is provided along the driver's side rear frame. This wire should be used t o install a center high-nlounted stoplamp in the cap 01- camper. 3. Pull the assembly away from the pickup side panel. L. Turn the socket counterclockwise to remove it. Push C the tab i n while you turn the socket. 5. Pull the bulb out. 6. Push the new bulb into the socket. 7. Put the socket into the ussCmbly and turn the socket clockwise until it locks i n place. 8. Replace the assembly. Install and tighten the screws. 9. Close the tailgate.