1998 GMC Jimmy Owner's Manual - Page 307
1998 GMC Jimmy Manual
Page 307 highlights
Taillamps 1. Open the endgate. 7. Put the socket intothe lamp assembly and turn the socket to the right until it locks into place. 8. Install the lamp assembly and screws. Remove the two screws from the lamp assembly. I 9. Close the endgate. Windshield Wiper Blade Replacemen See "Normal Maintenance Replacement Parts" in the Index for the proper type of replacement blade. I NOTICE: U 3. Pull the assembly away from the vehicle. 4. Turn the socket to the left to remove it. Push the tab in while you turn the socket tothe left. 1. To remove the old wiper blades, lift the wiper arm until it locks into avertical position. Use care when removing or installingblade a assembly. Accidental bumping can cause the arm to fall back and strike the windshield. 5. Holding the base of the bulb, pull the bulb straight out of the socket. 6. Push the new bulb straight into the socket until it clicks. 6-38