2005 GMC Canyon Owner's Manual - Page 111

Shifting Out of NEUTRAL After towing your vehicle, you will have to shift out of NEUTRAL in order to drive. To shift out of NEUTRAL, do the following: 1. Set the parking brake and apply the regular brake pedal. See Parking Brake on page 2-29 for more information. 2. Start a vehicle with an automatic transmission in PARK (P). Use FIRST (1) for vehicles with a manual transmission. 3. Put an automatic transmission in NEUTRAL (N) or press the clutch pedal for vehicles with a manual transmission. 4. Press the button for the desired transfer case position (two-wheel high, four-wheel high or four-wheel low). 5. After the transfer case has shifted out of NEUTRAL, the indicator light will go out. 6. Release the parking brake. 7. Shift the transmission to the desired gear. It is normal for your vehicle to exhibit a significant engagement noise and bump when shifting in and out of Neutral (N) and four-wheel low. Parking Brake The parking brake pedal is located to the left of the regular brake pedal, near the driver's door. To set the parking brake, hold the regular brake pedal down with your right foot. Push down the parking brake pedal with your left foot. A chime will activate and the warning light will flash when the parking brake is applied and the vehicle is moving at least 3 mph (5 km/h) for at least three seconds. The chime will deactivate and the light will turn off when the parking brake is set and the vehicle is moving below 3 mph (5 km/h). See Brake System Warning Light on page 3-28. 2-29