2006 GMC Canyon Owner's Manual
2006 GMC Canyon Manual
2006 GMC Canyon manual content summary:
- 2006 GMC Canyon | Owner's Manual - Page 1
2006 GMC Canyon Owner Manual Seats and Restraint Systems ...1-1 Front Seats ...1-2 Rear Seats ...1-10 Safety Belts ...1-13 Child Restraints ...1-34 Airbag System ...1-63 Restraint System Check ...1-79 Features and Controls ...2-1 Keys ...2-2 Doors and Locks ...2-7 Windows ...2-11 Theft-Deterrent - 2006 GMC Canyon | Owner's Manual - Page 2
Motors of Canada Limited" for GMC whenever it appears in this manual. Keep this manual in the vehicle, so it will be there if it is needed while you are on the road. If the vehicle is sold, leave this manual in the vehicle. How to Use This Manual Many people read the owner manual from beginning - 2006 GMC Canyon | Owner's Manual - Page 3
things that could hurt you if you were to ignore the warning. You will also find a circle with a slash through it in this book. This safety symbol means "Do Not," "Do Not do this" or "Do Not let this happen." {CAUTION: These mean there is something that could hurt you or - 2006 GMC Canyon | Owner's Manual - Page 4
, this damage would not be covered by your vehicle's warranty, and it could be costly. But the notice will tell what to do to help avoid the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words. There are also warning labels on - 2006 GMC Canyon | Owner's Manual - Page 5
These are some examples of symbols that may be found on the vehicle: v - 2006 GMC Canyon | Owner's Manual - Page 6
✍ NOTES vi - 2006 GMC Canyon | Owner's Manual - Page 7
Servicing Your Airbag-Equipped Vehicle ...1-77 Adding Equipment to Your Airbag-Equipped Vehicle ...1-78 Restraint System Check ...1-79 Checking the Restraint Systems ...1-79 Replacing Restraint System Parts After a Crash ...1-80 1-1 Front Seats ...1-2 Manual Seats ...1-2 Power Seats ...1-3 Manual - 2006 GMC Canyon | Owner's Manual - Page 8
can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver's seat only when the vehicle is not moving. Lift the bar located - 2006 GMC Canyon | Owner's Manual - Page 9
toward the front or the rear of the vehicle. Vertical Control: This control reclines the seatbacks. See Reclining Seatbacks on page 1-5 for more information. Turn the top of the knob toward the front of the vehicle to increase lumbar support. Turn the top of the knob toward the rear of the vehicle - 2006 GMC Canyon | Owner's Manual - Page 10
front seats. Press and hold the front of the control until you have the desired lumbar support. To decrease lumbar support, press and hold the rear of the control. This feature will heat the cushion and back of the seats. Press the top of the switch to turn the heat to the high setting. Press - 2006 GMC Canyon | Owner's Manual - Page 11
Reclining Seatbacks If your seats have manual reclining seatbacks, the lever is located on the outboard side of to make sure it is locked. To recline the seatback, do the following: 1. Lift the recline lever. 2. Move the seatback to the desired position, then release the lever to lock the seatback - 2006 GMC Canyon | Owner's Manual - Page 12
pressure to the seatback and the seatback will return to the upright position. If your vehicle has power reclining seatbacks, use the vertical power seat control located on the outboard side of the seat. {CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That - 2006 GMC Canyon | Owner's Manual - Page 13
vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job because it will not be against your body. Instead, it will be in front of you. In a crash, you could - 2006 GMC Canyon | Owner's Manual - Page 14
Head Restraints Your front seats may have adjustable head restraints. If your vehicle has rear seats, they may have adjustable head restraints. Pull up on the head restraint to raise it. To lower the head restraint, press the button located on top of the seatback and push down on the head restraint. - 2006 GMC Canyon | Owner's Manual - Page 15
Seatback Latches Your vehicle may have front seatbacks that fold forward for easy access to the rear seats or the storage area behind the seats. To fold the seatback forward, push the lever on the side of the seat rearward and pull the seatback forward. {CAUTION: If the seatback is not locked, it - 2006 GMC Canyon | Owner's Manual - Page 16
rear seatback(s) in the crew cab can be folded forward. To fold the rear seatback(s) forward, do the following: 2. Pull the loop, located on the outboard side of the seatback, forward until you hear a click. 3. Fold the seatback(s) forward. 1. Disconnect the rear center safety belt latch from the - 2006 GMC Canyon | Owner's Manual - Page 17
, do the following: 1. Lift the seatback(s) and push it into place. {CAUTION: A safety belt that is improperly routed check to be sure that the safety belts are properly routed and attached, and are not twisted. 3. Reconnect the center safety belt latch plate to the mini buckle. Make sure the safety - 2006 GMC Canyon | Owner's Manual - Page 18
Rear Seat Operation (Extended Cab) If your vehicle has an extended cab, there may be forward folding seats in the rear Rear Storage Area on page 2-41. To store the seat, do the following: 1. Secure the safety belt buckle to the inboard side of the seat with the hook and loop fastener (A), so that - 2006 GMC Canyon | Owner's Manual - Page 19
has indicators to remind you and your passengers to buckle your safety belts. See Safety Belt Reminder Light on page 3-25 and Passenger Safety Belt Reminder Light on page 3-25. {CAUTION: Do not let anyone ride where he or she cannot wear a safety belt properly. If you are in a crash and you are not - 2006 GMC Canyon | Owner's Manual - Page 20
states and in all Canadian provinces, the law says to wear safety belts. Here is why: They work. You never know if or killed. After more than 30 years of safety belts in vehicles, the facts are clear. In most crashes buckling up does matter...a lot! Why Safety Belts Work When you ride in or on - 2006 GMC Canyon | Owner's Manual - Page 21
Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. 1-15 - 2006 GMC Canyon | Owner's Manual - Page 22
The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel... 1-16 - 2006 GMC Canyon | Owner's Manual - Page 23
in most of them in the future. But they are supplemental systems only; so they work with safety belts - not instead of them. Every airbag system ever offered for sale has required the use of safety belts. Even if you are in a vehicle that has airbags, you still have to buckle up to - 2006 GMC Canyon | Owner's Manual - Page 24
safety belts? How to Wear Safety Belts Properly This part is only for people of adult size. Be aware that there are special things to know about safety not protect you from things beyond your control, such as bad drivers. Most than 40 mph (65 km/h). Safety belts are for everyone. Driver Position - 2006 GMC Canyon | Owner's Manual - Page 25
the buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 1-34. Make sure the release button on the buckle is positioned so you would be able to unbuckle the - 2006 GMC Canyon | Owner's Manual - Page 26
The lap part of the belt should be worn low and snug on the hips, just touching . The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there is a sudden stop or crash, or if you pull - 2006 GMC Canyon | Owner's Manual - Page 27
if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. A: The shoulder belt is too loose. It will not give nearly as much protection this way. 1-21 - 2006 GMC Canyon | Owner's Manual - Page 28
Q: What is wrong with this? {CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries. Always buckle your belt - 2006 GMC Canyon | Owner's Manual - Page 29
Q: What is wrong with this? {CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the - 2006 GMC Canyon | Owner's Manual - Page 30
forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it. A: The belt is twisted across the body. 1-24 - 2006 GMC Canyon | Owner's Manual - Page 31
go back out of the way. When the safety belt is not in use, slide the latch plate up the safety belt webbing. The latch plate should rest on the stitching on the safety belt, near the guide loop on the side wall. Before you close the door, be sure the belt is out of - 2006 GMC Canyon | Owner's Manual - Page 32
be worn as low as possible, below the rounding, throughout the pregnancy. The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key - 2006 GMC Canyon | Owner's Manual - Page 33
, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt is not long enough, see Safety Belt Extender on page 1-34. When you sit in the center front seating position, you have a lap - 2006 GMC Canyon | Owner's Manual - Page 34
are hurt more often in crashes than those who are wearing safety belts. Rear passengers who are not safety belted can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts. Lap-Shoulder Belt All rear seating positions have lap-shoulder belts - 2006 GMC Canyon | Owner's Manual - Page 35
Extender on page 1-34. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. The lap part of the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 3. To make the lap - 2006 GMC Canyon | Owner's Manual - Page 36
should fit against your body. To unlatch the belt, just push the button on the buckle. For outboard seating positions, when the safety belt is not in use, slide the latch plate up the safety belt webbing. The latch plate should rest on the stitching on the safety belt, near the guide loop on the side - 2006 GMC Canyon | Owner's Manual - Page 37
vehicle may have rear safety belt comfort guides for the rear outside positions. Rear safety belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When attached to a shoulder belt, the comfort guide positions the belt away - 2006 GMC Canyon | Owner's Manual - Page 38
and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the - 2006 GMC Canyon | Owner's Manual - Page 39
located between the interior body and the seatback. Safety Belt Pretensioners Your vehicle has safety belt pretensioners for the driver and right front passenger. Although you cannot see them, they are located on the retractor part of the safety belts. They help the safety belts reduce a person - 2006 GMC Canyon | Owner's Manual - Page 40
designed for adults. Never use it for securing child seats. To wear it, just attach it to the regular safety belt. For more information, see the instruction sheet that comes with the extender. Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle - 2006 GMC Canyon | Owner's Manual - Page 41
Q: What is the proper way to wear safety belts? A: An older child should wear a lap-shoulder belt and people who are buckled up, or can be thrown out of the vehicle. Older children need to use safety belts properly. {CAUTION: Never do this. Here two children are wearing the same belt. The belt can - 2006 GMC Canyon | Owner's Manual - Page 42
, but the shoulder part is behind the child Guides on page 1-31. If the child is sitting in the center rear seat passenger position, move the child toward the safety belt buckle. In either case, be sure that the shoulder belt still is on the child's shoulder, so that in a crash the child's upper body - 2006 GMC Canyon | Owner's Manual - Page 43
in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children - 2006 GMC Canyon | Owner's Manual - Page 44
, but not for young children and infants. Neither the vehicle's safety belt system nor its airbag system is designed for them. Young the vehicle's owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child's weight, height and - 2006 GMC Canyon | Owner's Manual - Page 45
. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer's instructions that come with the restraint, state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints - 2006 GMC Canyon | Owner's Manual - Page 46
Child Restraint Systems An infant car bed (A), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous flat surface. Make sure that the infant's head rests toward the center of the vehicle. A rear-facing infant seat (B) - 2006 GMC Canyon | Owner's Manual - Page 47
facing child seat (C-E) provides restraint for the child's body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields. A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle's safety belt system. Some booster seats have a shoulder belt - 2006 GMC Canyon | Owner's Manual - Page 48
part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle's owner motor vehicle safety standards. Then follow the instructions for the restraint. You may find these instructions on for more information. A child can be endangered in a crash - 2006 GMC Canyon | Owner's Manual - Page 49
both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer. are attached to a flat pad which rests low against the child's body. A shelf- or armrest-type shield has straps that are attached to a wide, shelf - 2006 GMC Canyon | Owner's Manual - Page 50
Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that child restraints be secured in a rear seat including an infant riding in a rear-facing infant seat, a child riding in a forward-facing child - 2006 GMC Canyon | Owner's Manual - Page 51
{CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger's airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. Be sure the airbag is off before using a rear-facing child - 2006 GMC Canyon | Owner's Manual - Page 52
child restraint is properly installed using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. When installing a child restraint with a top tether, you must also use either - 2006 GMC Canyon | Owner's Manual - Page 53
attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top child restraints also have a top tether. Be sure to read and follow the instructions for your child restraint. If the child restraint does not have a top tether - 2006 GMC Canyon | Owner's Manual - Page 54
anchors. j (Lower Anchor): Seating positions with two lower anchors. i (Top Tether Anchor): Seating positions with top tether anchors. Extended Cab - Rear Seat Crew Cab - Rear Seat j (Lower Anchor): Seating positions with two lower anchors. i (Top Tether Anchor): Seating positions with top tether - 2006 GMC Canyon | Owner's Manual - Page 55
use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed. Crew Cab The top tether anchors in an extended cab model are located on the center of the back wall behind a removable cover for the rear seating positions. Be sure to use - 2006 GMC Canyon | Owner's Manual - Page 56
or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be Put the Restraint on page 1-44 for additional information. Extended Cab - Rear Seat For regular and extended cab models without rear seats, there is a top - 2006 GMC Canyon | Owner's Manual - Page 57
, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the - 2006 GMC Canyon | Owner's Manual - Page 58
to the top tether anchor (A). Refer to the child restraint instructions and the following steps: 2.1. Pull the seatback forward to access the top tether anchors (A). See Rear Seat Operation (Crew Cab) on page 1-10 or Rear Seat Operation (Extended Cab) on page 1-12. If the position you are using has - 2006 GMC Canyon | Owner's Manual - Page 59
does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 3.1. Find the lower anchors for the desired seating position. 3.2. Attach and tighten the lower attachments - 2006 GMC Canyon | Owner's Manual - Page 60
Extended Cab - Rear Seat 1.3. Attach the lower attachments on the child restraint to the lower anchors (D) in the vehicle. The child restraint instructions top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 1.1. Find the - 2006 GMC Canyon | Owner's Manual - Page 61
the lower anchor attachments and the top tether. The child restraint instructions will show you how. 4. Push and pull the child restraint in different directions to be sure it is secure. Front Seat - Regular/Extended Cab without Rear Seats Your vehicle has a right front passenger's airbag and - 2006 GMC Canyon | Owner's Manual - Page 62
child restraint on the seat. 2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how. If the position you are using has a fixed or adjustable head restraint and you are using - 2006 GMC Canyon | Owner's Manual - Page 63
3. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 1-57 - 2006 GMC Canyon | Owner's Manual - Page 64
the safety belt is not in use, slide the latch plate up the safety belt webbing. The latch plate should rest on the stitching on the safety and tighten the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and to Lower Anchors and Tethers for Children - 2006 GMC Canyon | Owner's Manual - Page 65
seat is detected. See Passenger Sensing System on page 1-72 and Passenger Airbag Status Indicator on page 3-27 for more information on this including important safety information. If your vehicle has a rear seat that will accommodate a rear-facing child restraint, there is a label on your sun visor - 2006 GMC Canyon | Owner's Manual - Page 66
securing the forward-facing child restraint. See Power Seats on page 1-3 or Manual Seats on page 1-2. If your child restraint is equipped with the LATCH or local law requires that the top tether be anchored or if the instructions that come with the child restraint say that the top tether must be - 2006 GMC Canyon | Owner's Manual - Page 67
airbag, the off indicator in the passenger airbag status indicator should light and stay lit when you turn the ignition to ON or START the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how. 4. Buckle the belt. - 2006 GMC Canyon | Owner's Manual - Page 68
5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. If you are using a - 2006 GMC Canyon | Owner's Manual - Page 69
and restarting the vehicle, the on indicator is still lit, check to make sure that the vehicle's seatback is not pressing check with your dealer. To remove the child restraint, if the top tether is attached, disconnect it. Unbuckle the vehicle's safety belt and let it go back all the way. The safety - 2006 GMC Canyon | Owner's Manual - Page 70
of hitting things inside the vehicle or being ejected from it. Airbags are "supplemental restraints" to the safety belts. All airbags are designed to work with safety belts but do not replace them. Frontal airbags for the driver and right front passenger are designed to deploy in moderate to severe - 2006 GMC Canyon | Owner's Manual - Page 71
airbag inflation before and during a crash. Always wear your safety belt even with frontal airbags. The driver should sit as far back as possible while still maintaining control of the vehicle. Occupants should not lean on or sleep against the door. {CAUTION: Anyone who is up against, or very close - 2006 GMC Canyon | Owner's Manual - Page 72
which shows the airbag symbol. Where Are the Airbags? The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See Airbag Readiness Light on page 3-26 for more information. The driver's airbag is in the middle of the steering wheel - 2006 GMC Canyon | Owner's Manual - Page 73
The right front passenger's airbag is in the instrument panel on the passenger's side. If your vehicle has a roof-mounted side impact airbag for the driver and the person seated directly behind the driver, it is located in the ceiling above the side windows. 1-67 - 2006 GMC Canyon | Owner's Manual - Page 74
covering. If your vehicle has side impact airbags, never secure anything to the roof of your vehicle by routing the rope or tiedown through any door or window opening. If you do, the path of an inflating side impact airbag will be blocked. The path of an inflating airbag - 2006 GMC Canyon | Owner's Manual - Page 75
intended to inflate during vehicle rollovers, rear impacts, or in many side impacts. If your vehicle has side impact airbags, it has electronic side sensors. The side impact airbags are intended to inflate in moderate to severe side crashes. A side impact airbag will inflate if the crash severity - 2006 GMC Canyon | Owner's Manual - Page 76
seat. Seat position sensors provide information that is used road usage. Observe safe driving speeds, especially on rough terrain. As always, wear your safety belt. See Off-Road Driving on page 4-15 for more tips on off-road related hardware are all part of the airbag modules inside the steering wheel - 2006 GMC Canyon | Owner's Manual - Page 77
safety problems for people with a history of asthma or other breathing trouble battery power is available). You can lock the doors again by using the door lock. The interior lamps and hazard warning flashers will deactivate after approximately 15 minutes. You can use the radio controls module The parts - 2006 GMC Canyon | Owner's Manual - Page 78
will be visible during the system check. When the system check is complete, either the word ON modules and possibly other parts. The service manual for your vehicle covers the need to replace other parts. • Your vehicle is equipped with a crash sensing and diagnostic module which records information - 2006 GMC Canyon | Owner's Manual - Page 79
The passenger sensing system works with sensors that are part of the right front passenger's seat and safety belt. The sensors are designed to detect the presence of a properly seated occupant and determine if the passenger's frontal airbag should be enabled (may inflate) or not. - 2006 GMC Canyon | Owner's Manual - Page 80
If your vehicle does not have a rear seat that will accommodate a rear-facing child restraint, never put a child in a rear-facing child restraint in the right front passenger seat the unless passenger airbag status indicator shows off. Never put a rear facing child restraint in the right front - 2006 GMC Canyon | Owner's Manual - Page 81
check size body build. Everyone in your vehicle who has outgrown child restraints should wear a safety weight off of the seat for a period of time • the right front passenger seat is occupied by a smaller person, such as a child who has outgrown child restraints • or if there is a critical problem - 2006 GMC Canyon | Owner's Manual - Page 82
the person's legs comfortably extended. Restart the vehicle serviced promptly, because an adult-size person sitting in the right front passenger's seat may not have the protection of the frontal airbag. See Airbag Readiness Light on page 3-26 for more on this, including important safety information - 2006 GMC Canyon | Owner's Manual - Page 83
vehicle should be serviced. There are parts of the airbag system in several places around your vehicle. Your dealer and the service manual have information about servicing your vehicle and the airbag system. To purchase a service manual, see Service Publications Ordering Information on page 7-15 - 2006 GMC Canyon | Owner's Manual - Page 84
properly? A: Changing or moving any parts of the front seats, safety belts, the airbag sensing and diagnostic module, or the instrument panel can affect airbag system may not work properly if you relocate any of the airbag sensors. If you have any questions about this, you should contact Customer - 2006 GMC Canyon | Owner's Manual - Page 85
System Check Checking the Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety - 2006 GMC Canyon | Owner's Manual - Page 86
used during a more severe crash, you may need new LATCH system parts. If belts are cut or damaged, replace them. Collision damage also may mean you will need to have LATCH system, safety belt or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt or LATCH system - 2006 GMC Canyon | Owner's Manual - Page 87
Doors and Locks ...2-7 Door Locks ...2-7 Power Door Locks ...2-8 Rear Door Security Locks (Crew Cab) ...2-8 Lockout Protection ...2-9 Rear Doors (Extended Cab) ...2-9 Tailgate ...2-9 Windows ...2-11 Manual Windows ...2-11 Power Windows ...2-12 Sliding Rear Window ...2-13 Sun Visors ...2-13 Theft - 2006 GMC Canyon | Owner's Manual - Page 88
Keys {CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed. Do not leave the keys in a vehicle with - 2006 GMC Canyon | Owner's Manual - Page 89
to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: When a new vehicle is delivered, the dealer provides the owner with a pair of identical keys and a key code number - 2006 GMC Canyon | Owner's Manual - Page 90
transmitter higher, and try again. • Check to determine if battery replacement is necessary. See "Battery Replacement" under Remote Keyless Entry System Operation on page 2-4. • If you are still having trouble, see your dealer or a qualified technician for service. Press the unlock button again - 2006 GMC Canyon | Owner's Manual - Page 91
sounding, the doors will lock but the content theft-deterrent system will not arm until the opened door is closed. You can program different feedback modes through the Driver Information Center (DIC). To program the feedback modes, see "Remote Keyless Entry Feedback" under DIC Controls and Displays - 2006 GMC Canyon | Owner's Manual - Page 92
transmitter works, it is probably time to change the battery. Notice: When replacing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the transmitter. To replace the battery, do the following: 1. Insert a thin coin, or similar - 2006 GMC Canyon | Owner's Manual - Page 93
through an unlocked door when you slow down or stop your vehicle. Locking your doors can help prevent this from happening. To lock a door from the inside, push the manual lever on the door forward. To unlock a door from the inside, push the lever on the door rearward. You will see a colored area on - 2006 GMC Canyon | Owner's Manual - Page 94
the security lock label. Driver's Switch Shown, Front Passenger's Switch Similar Press L (lock) to lock all the doors at once. To unlock all the doors, press U (unlock). On crew cab models, use the manual door lock lever on each rear door to lock or unlock the doors from the rear seating areas. To - 2006 GMC Canyon | Owner's Manual - Page 95
door is open. If the power door lock switch is pressed when a door is open and the key is in the ignition, all of the doors will lock and then the driver's door to unlock the tailgate. Rear Doors (Extended Cab) To open a rear door, open the front door. Then, use the handle located on the front edge - 2006 GMC Canyon | Owner's Manual - Page 96
partially lower the tailgate do the following: 1. With the tailgate fully open, lift up slightly on the entire tailgate assembly. 2. Remove the retaining cable from the bolt head while pushing the cable bracket forward. When the larger part of the hole on the bracket is over the bolt, slide the - 2006 GMC Canyon | Owner's Manual - Page 97
even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. Manual Windows On a vehicle with manual windows, use the handle on each door to open and close each window. 2-11 - 2006 GMC Canyon | Owner's Manual - Page 98
band on the side of the button can be seen when the windows are not locked out. Crew Cab Switches Shown The power windows will work when the ignition is in ACC (Accessory) or ON or while Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page 2-17. Pull the front of the - 2006 GMC Canyon | Owner's Manual - Page 99
close the window, be sure the latch is engaged. To activate the content theft-deterrent system, do the following: 1. Close all the doors. 2. Lock the doors with the remote keyless entry transmitter. The security light, located on the instrument panel cluster, will flash. Sun Visors To block glare - 2006 GMC Canyon | Owner's Manual - Page 100
the horn will sound for two minutes, then will turn off to save the battery power. Remember, the theft-deterrent system will not activate if you lock the doors with a key, the manual door lock, or power door lock switch. The system can only be activated using the remote keyless entry transmitter, or - 2006 GMC Canyon | Owner's Manual - Page 101
wear and earlier replacement. Follow this breaking-in guideline every time you get new brake linings. • Do not tow a trailer during break-in. See Towing a Trailer on page 4-56 for the trailer towing capabilities of your vehicle and more information. Following break-in, engine speed and load - 2006 GMC Canyon | Owner's Manual - Page 102
to after you start your engine and release the switch. The switch stays in ON when the engine is running. But even when the engine is not running, you can use ON to operate your electrical accessories and to display some instrument panel cluster warning and indicator lights. The transmission is also - 2006 GMC Canyon | Owner's Manual - Page 103
will continue to work for up to 20 minutes or until a door is opened. Manual Transmission The gear selector should be in NEUTRAL and the parking brake engaged. Hold the clutch pedal to the floor and start the engine. Your vehicle will not start if the clutch pedal is not all the way down - that is - 2006 GMC Canyon | Owner's Manual - Page 104
to work with the electronics in your vehicle. If you add electrical parts or accessories, you could change the way the engine operates. Before adding electrical equipment, check with your dealer. If you do not, your engine might not perform properly. Any resulting damage would not be covered by - 2006 GMC Canyon | Owner's Manual - Page 105
colder, the engine coolant heater can help. You will get easier starting and better fuel economy during engine warm-up. Usually, the coolant heater should be it away from moving engine parts. If you do not, it could be damaged. How long should you keep the coolant heater plugged in? The answer - 2006 GMC Canyon | Owner's Manual - Page 106
brake firmly set. Your vehicle can roll. Do not leave your vehicle when the engine is running unless you have to. If you have left the engine LOCK for an extended period, it is recommended that you disconnect the battery cable from the battery to prevent discharging your battery. There are several - 2006 GMC Canyon | Owner's Manual - Page 107
could damage the transmission. The repairs would not be covered by your warranty. Shift to REVERSE (R) only after your vehicle is stopped. To rock brake pedal, your vehicle could move very rapidly. You could lose control and hit people or objects. Do not shift into a drive gear while your engine is - 2006 GMC Canyon | Owner's Manual - Page 108
fuel economy than THIRD (3). You can use SECOND (2) on hills. It can help control your speed as you go down steep mountain roads, but then you would also want to use your brakes your manual transmission: FIRST (1): Press the clutch pedal and shift into FIRST (1). Then, slowly let up on the clutch - 2006 GMC Canyon | Owner's Manual - Page 109
not be covered by your warranty. Shift to REVERSE (R) only after your vehicle is stopped. Use REVERSE (R), along with the parking brake, for parking your vehicle. Up-Shift Light This light will show you when to shift to the next higher gear for best fuel economy. When this light comes on, you can - 2006 GMC Canyon | Owner's Manual - Page 110
lose control of drive, you can send your engine's driving power to all four familiar with its operation. Read the part that follows before using four-wheel -wheel drive for an extended period of time may cause premature pavement in four-wheel drive for extended periods of time. Driving Conditions Normal - 2006 GMC Canyon | Owner's Manual - Page 111
setting also engages your front axle to give you extra traction. It sends the maximum power to all four wheels. You might choose four-wheel low if you were driving off-road in sand, mud, or deep snow and while climbing or descending steep hills. Indicator lights in the buttons show you which - 2006 GMC Canyon | Owner's Manual - Page 112
done at any speed, and the front axle will unlock automatically. It is normal to shift with the vehicle stopped, the indicator light may still flash slowly. It may be (N) for an automatic transmission or the clutch pedal engaged for a manual transmission. The preferred method for shifting out - 2006 GMC Canyon | Owner's Manual - Page 113
on page 4-50 for towing instructions. To shift the transfer case into NEUTRAL, do the following: 1. Set the parking brake. 2. Start the vehicle. 3. Press the regular brake pedal and shift the transmission in NEUTRAL (N), or press in the clutch for vehicles with a manual transmission. 4. Shift the - 2006 GMC Canyon | Owner's Manual - Page 114
go off. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Verify that the parking brake is fully released and the brake warning light is off before driving. If you are towing a trailer and are parking on any hill, see - 2006 GMC Canyon | Owner's Manual - Page 115
have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your vehicle will not move, even when you are on fairly level ground, use the steps that follow. If you are pulling a trailer, see Towing a Trailer on page 4-56. 1. Hold the brake pedal down with - 2006 GMC Canyon | Owner's Manual - Page 116
the engine running. If you have to leave your vehicle with the engine running, be sure your vehicle is in PARK (P) and your parking brake is (P) (Automatic Transmission) Your vehicle has an automatic transmission shift lock control system which locks the shift lever in PARK (P) when the ignition - 2006 GMC Canyon | Owner's Manual - Page 117
turn the ignition key to LOCK, remove the key and release the clutch. If you are parking on a hill, or if your vehicle is pulling a trailer, see Towing a Trailer on page 4-56. {CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves - 2006 GMC Canyon | Owner's Manual - Page 118
. {CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle. See the earlier caution under Engine Exhaust on page 2-32. Also, idling in a closed-in place can let deadly carbon monoxide (CO) into your vehicle even if the climate control fan is at - 2006 GMC Canyon | Owner's Manual - Page 119
engine running, the vehicle can move suddenly. You or others could be injured. To be sure your vehicle will not move, even when it is on fairly level ground, always set the parking brake and move the automatic transmission shift lever to PARK (P), or the manual set your parking brake. Follow the proper - 2006 GMC Canyon | Owner's Manual - Page 120
system and how to subscribe to OnStar®. See OnStar® System on page 2-38 for more information about the services OnStar® provides. Map Lamps The mirror has map lamps located at the bottom of the mirror. To manually turn the lamps on or off, press the button next to each lamp. Cleaning the Mirror - 2006 GMC Canyon | Owner's Manual - Page 121
by pressing this button located on the lower part of the mirror. Press and hold the button for up to three seconds to turn this feature on or off. T (Indicator Light): Map Lamps The mirror has map lamps located at the bottom of the mirror. To manually turn the lamps on or off, press the - 2006 GMC Canyon | Owner's Manual - Page 122
variance. To adjust for compass variance, do the following: 1. Find your current location and variance zone number on the zone map that follows. 2. Press and hold the left map light button until a zone number appears on the display. 3. Once the zone number appears on the display, press the on/off - 2006 GMC Canyon | Owner's Manual - Page 123
feature, the controls are located on the driver's door armrest. Cleaning do the following: Outside Manual Mirrors If the vehicle has manual outside mirrors, adjust them switch to the L (left) or R (right) to choose the driver's or passenger's mirror. 2. Use the arrows located on the four-way control - 2006 GMC Canyon | Owner's Manual - Page 124
your right. Check your inside mirror or glance over your shoulder before changing lanes. OnStar® uses global positioning system (GPS) satellite technology, wireless communications, and live advisors to provide you with a wide range of safety, security, information, and convenience services. If your - 2006 GMC Canyon | Owner's Manual - Page 125
Personal Calling, refer to the OnStar® User's Guide in the vehicle's glove box, visit www. Door Unlock/Vehicle Alert • Remote Diagnostics • Online Concierge Directions and Connections® Plan • All Safe and Sound Plan Services • Driving Directions • RideAssist • Information and Convenience Services - 2006 GMC Canyon | Owner's Manual - Page 126
storage area. The upper storage area will lift up with the lid of the lower part of the front doors as well as two cupholders located at the front end of the console. Vehicles with bench seats may have cupholders attached to the front of the center seat. If your vehicle is an extended cab or crew cab - 2006 GMC Canyon | Owner's Manual - Page 127
your vehicle. If your vehicle has assist handles, they are located above the front passenger door if you have a regular cab, or above the front and rear passenger doors if you have an extended cab or crew cab. If your vehicle is equipped with roof-mounted side impact air bags, there will be assist - 2006 GMC Canyon | Owner's Manual - Page 128
Lift the lid from the center area to access the storage box. To open a storage box, unhook the bottom and lift the two latches on each side of the storage box. 2-42 - 2006 GMC Canyon | Owner's Manual - Page 129
Battery Warning Light ...3-29 Up-Shift Light (Manual Transmission) ...3-30 Brake System Warning Light ...3-30 Anti-Lock Brake System Warning Light ...3-31 Engine Coolant Temperature Gage ...3-32 Malfunction Indicator Lamp ...3-32 Oil Pressure Light ...3-36 Security Light ...3-37 Cruise Control Light - 2006 GMC Canyon | Owner's Manual - Page 130
...3-77 Theft-Deterrent Feature (RDS Radios) ...3-77 Radio Reception ...3-78 Care of Your CDs ...3-78 Care of the CD Player ...3-79 Fixed Mast Antenna ...3-79 XM™ Satellite Radio Antenna System ...3-79 Chime Level Adjustment ...3-79 Driver Information Center (DIC) ...3-39 DIC Controls and Displays - 2006 GMC Canyon | Owner's Manual - Page 131
✍ NOTES 3-3 - 2006 GMC Canyon | Owner's Manual - Page 132
Instrument Panel Overview Manual Transmission shown, Automatic Transmission similar 3-4 - 2006 GMC Canyon | Owner's Manual - Page 133
Brake Release. See Parking Brake on page 2-28. H. Horn. See Horn on page 3-6. I. Traction Control Button or Four-Wheel Drive Buttons. See Traction Control System 3-19. L. Climate Control System. See Climate Control System on page 3-19. M. Accessory Power Outlet. See Accessory Power Outlet(s) on - 2006 GMC Canyon | Owner's Manual - Page 134
ashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. If you carry reflective triangles, you can set one up at the side of the road about 300 feet (100 m) behind your vehicle. Horn To sound the horn, press the horn - 2006 GMC Canyon | Owner's Manual - Page 135
-to-Pass. See Flash-to-Pass on page 3-9. • N Windshield Wipers. See Windshield Wipers on page 3-10. • L Windshield Washer. See Windshield Washer on page 3-10. • J Cruise Control. See Cruise Control on page 3-11. 3-7 - 2006 GMC Canyon | Owner's Manual - Page 136
avoid an accident. If the arrows do not go on at all when signaling a turn, check for a burned-out bulb or a blown fuse. For bulb replacement, see Taillamps, Turn Signal, Stoplamps and Back-up Lamps on page 5-51. For a and Messages on page 3-42 DIC Warnings and Messages for more information. 3-8 - 2006 GMC Canyon | Owner's Manual - Page 137
instrument panel. To return to low-beam headlamps, pull the multifunction lever toward you. Then release it. When the high beams are on, this indicator light on the instrument panel cluster will also be on. Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in - 2006 GMC Canyon | Owner's Manual - Page 138
control the windshield wipers by turning the band with the wiper symbol on it. The windshield wipers work in all ignition positions, except off. This includes the Retained Access Power mode. See Retained Accessory between wipes. This can be very useful in light rain or snow. Turn the band to choose - 2006 GMC Canyon | Owner's Manual - Page 139
if the master cylinder brake fluid level is low. If you apply your brakes, the cruise control will shut off. 9(Off): This position turns the system off. {CAUTION: Cruise control can be dangerous where you cannot drive safely at a steady speed. So, do not use your cruise control on winding roads or - 2006 GMC Canyon | Owner's Manual - Page 140
at resume/accelerate the vehicle will keep going faster until you release the switch or apply the brake. So unless you want to go faster, don't hold the switch at resume/accelerate. 1. Move the cruise control switch to on. 2. Get up to the speed you want. 3. Press in the set button at the end - 2006 GMC Canyon | Owner's Manual - Page 141
speed you want, then release it. Ending Cruise Control To turn off the cruise control, do one of the following: • Step lightly on the brake pedal. • Move the cruise control switch to off. • Lightly tap or press the clutch, if you have a manual transmission. • To slow down in very small amounts - 2006 GMC Canyon | Owner's Manual - Page 142
information. ;(Parking Lamps): Turn the knob to this position to turn on the parking lamps, together with the following: Sidemarker Lamps Taillamps License Plate Lamps Instrument Panel Lights The control with the previously listed lamps and lights. You can switch your headlamps from low to high - 2006 GMC Canyon | Owner's Manual - Page 143
such as the taillamps, sidemarker, parking lamps, roof marker lamps and the instrument panel lights. The radio lights will become more dim when the headlights are off compared to when the headlights are on. Your vehicle has a light sensor located on the top of the instrument panel. Be sure it is not - 2006 GMC Canyon | Owner's Manual - Page 144
and automatic headlamp system will only be affected when the light sensor sees a change in lighting lasting longer than the delay. If you start your vehicle to work. The fog lamp button is located near the exterior lamps control. Press the button to turn the fog lamps on while the headlamps or - 2006 GMC Canyon | Owner's Manual - Page 145
Panel Lights): Turn the thumbwheel up or down to brighten or dim the instrument panel lights and the door is opened or closed. See Interior Lamps on page 3-17 for additional information on location. Interior Lamps The thumbwheel for the interior lamps is located next to the exterior lamps control - 2006 GMC Canyon | Owner's Manual - Page 146
installation instructions included with the equipment. Notice: Improper use of the power outlet can cause damage not covered by your warranty. Do not hang any type of accessory or accessory bracket from the plug because the power outlets are designed for accessory power plugs only. Battery Run - 2006 GMC Canyon | Owner's Manual - Page 147
, or a fuse could be blown. Do not hold a cigarette lighter in while it is heating. Climate Controls Climate Control System Uplevel Climate Controls shown, Base similar With this system you can control the heating, cooling, and ventilation for your vehicle. Temperature Knob The left knob on the - 2006 GMC Canyon | Owner's Manual - Page 148
control panel is used to control the fan speed. Turn the knob clockwise or counterclockwise to increase or decrease the fan light will not come on or flash while in heat, floor, floor/defog, or defrost modes. Mode Knob The right knob on the control in this mode because interior window could fog under - 2006 GMC Canyon | Owner's Manual - Page 149
fuel economy while still maintaining the selected temperature. The air conditioning system removes moisture from the air, so you may sometimes notice a small amount of water dripping underneath your vehicle while idling or after turning off the engine the climate control system is used ow. Lift up or - 2006 GMC Canyon | Owner's Manual - Page 150
, or when one of the gages shows there may be a problem, check the section that tells you what to do about it. Please follow this manual's advice. Waiting to do repairs can be costly - and even dangerous. So please get to know your warning lights and gages. They are a big help. Your vehicle has - 2006 GMC Canyon | Owner's Manual - Page 151
cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, about how much fuel you have used, and many other things you will need to know to drive safely and economically. United States automatic transmission version shown - 2006 GMC Canyon | Owner's Manual - Page 152
(used in the United States) or kilometers (used in Canada). The odometer mileage can be checked without the vehicle running. Simply press the trip information stem. See "Odometer" under DIC Controls and Displays on page 3-39 for more information. You may wonder what happens if your vehicle needs - 2006 GMC Canyon | Owner's Manual - Page 153
belt. This would only occur if the passenger airbag is enabled. See Passenger Sensing System on page 1-72 for more information. The passenger safety belt light will also come on and stay on for several seconds, then it will flash for several more. You should have the passenger buckle their seat - 2006 GMC Canyon | Owner's Manual - Page 154
tells you if there is an electrical problem. The system check includes the airbag sensors, the airbag modules, the wiring and the crash sensing and diagnostic module. For more information on the airbag systems, see Airbag System on page 1-63. This light will come on when you start your vehicle, and - 2006 GMC Canyon | Owner's Manual - Page 155
shows off. United States Canada When the ignition key is turned to ON or START, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check. Then, after several more seconds, the status indicator will light - 2006 GMC Canyon | Owner's Manual - Page 156
has turned off the right front passenger's frontal airbag. See Passenger Sensing System on page 1-72 for more on this, including important safety information. {CAUTION: Even though the passenger sensing system is designed to turn off the passenger's frontal airbag if the system detects a rear - 2006 GMC Canyon | Owner's Manual - Page 157
remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service. Battery Warning Light This light will come on briefly when you start the vehicle, as a check to show you it is working; then it should go out. {CAUTION - 2006 GMC Canyon | Owner's Manual - Page 158
, there could be a brake problem. Have your brake system inspected right away. Shifting when the indicator light is on will help you get the best fuel economy. See "Up-Shift Light" under Manual Transmission Operation on page 2-22 for more information. United States Canada This light should come on - 2006 GMC Canyon | Owner's Manual - Page 159
needs service. If the regular brake system warning light isn't on, you still have brakes, but you don't have anti-lock brakes. If the regular brake system warning light is also on, you don't have anti-lock brakes and there's a problem with your regular brakes. See Brake System Warning Light on - 2006 GMC Canyon | Owner's Manual - Page 160
information. This system is called OBD II (On-Board Diagnostics-Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment. The check engine light comes on to indicate that there is a problem and service - 2006 GMC Canyon | Owner's Manual - Page 161
this light on, after awhile, your emission controls may not work as well, your fuel economy may not be as good, and your engine may not run as smoothly. This could lead to costly repairs that may not be covered by your warranty. Notice: Modifications made to the engine, transmission, exhaust, intake - 2006 GMC Canyon | Owner's Manual - Page 162
. Find a safe place to park your vehicle. Turn the key off, wait at least 10 seconds and restart the engine. If the light remains on steady, see "If the Light Is On Steady" following. If the light is still flashing, follow the previous steps, and see your dealer for service as soon as possible. 3-34 - 2006 GMC Canyon | Owner's Manual - Page 163
fuel to turn the light off. If none of the above steps have made the light turn off, your dealer can check the vehicle. Your dealer has the proper test equipment and diagnostic tools to fix any mechanical or electrical problems that may have developed. Emissions Inspection and Maintenance Programs - 2006 GMC Canyon | Owner's Manual - Page 164
be burned. Check your oil as soon as possible and have your vehicle serviced. Notice: Lack of proper engine oil maintenance may damage the engine. The repairs would not be covered by your warranty. Always follow the maintenance schedule in this manual for changing engine oil. The light goes on when - 2006 GMC Canyon | Owner's Manual - Page 165
there may be a problem with the Passlock® system. Your vehicle will not be protected by Passlock®, and you should see your dealer. Also, see Content Theft-Deterrent on page 2-13 for additional information regarding the security light. The light will go out when the cruise control is turned off. See - 2006 GMC Canyon | Owner's Manual - Page 166
Daytime Running Lamps (DRL) Indicator Light This light turns on whenever the Daytime Running Lamps are on. Here are four things that some owners ask about. None of these indicate a problem with your fuel gage: • At the gas station, the gas pump shuts off before the gage reads full. • It takes a - 2006 GMC Canyon | Owner's Manual - Page 167
the United States or kilometers for Canada. DIC Controls and Displays The Driver Information Center (DIC) comes on when the ignition is on. After a short delay, the DIC will display the information that was last displayed before the engine was turned off. If a problem is detected, a warning message - 2006 GMC Canyon | Owner's Manual - Page 168
on page 5-16. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Engine Oil on page 5-13 and Scheduled Maintenance on page 6-4 for more information. 4. To view the next available language, press - 2006 GMC Canyon | Owner's Manual - Page 169
3: On vehicles with an automatic transmission, this mode locks all of the doors when the vehicle is shifted out of PARK (P). The doors will not automatically unlock. On vehicles with a manual transmission, this mode locks all of the doors when the vehicle speed is greater than 15 mph (24 km/h). The - 2006 GMC Canyon | Owner's Manual - Page 170
. These messages require action before they can be removed from the DIC display. The following are the possible messages that can be displayed and some information about them. 3-42 - 2006 GMC Canyon | Owner's Manual - Page 171
be changed. Check the oil in your vehicle as soon as possible and have your vehicle serviced by your GM dealer. See Engine Oil on page 5-13 and Scheduled Maintenance on page 6-4 for more information. Press the reset stem to acknowledge the message and clear it from the display. BATTERY This message - 2006 GMC Canyon | Owner's Manual - Page 172
on page 5-13 for more information. FUEL CAP This message will be displayed if your vehicle's fuel cap is either off or loose. You should pull over and check to see if your vehicle's fuel cap is secure as soon as possible. You may also see the check engine light on the instrument panel cluster. See - 2006 GMC Canyon | Owner's Manual - Page 173
System Warning Light on page 3-30 for more information. The message will clear from the display after the parking brake is released. TRACTION FAULT If you have the Traction Control System (TCS), you may see this message if there is a problem with your Traction Control System (TCS). Check your TCS - 2006 GMC Canyon | Owner's Manual - Page 174
can be injured or killed. Always keep your eyes on the road and your mind on the drive - avoid engaging in extended searching while driving. Keeping your mind on the drive is important for safe driving. For more information, see Defensive Driving on page 4-2. Get familiar with your vehicle's audio - 2006 GMC Canyon | Owner's Manual - Page 175
or additional equipment is added to your vehicle, the chimes may not work. Make sure that replacement or additional equipment is compatible with your vehicle before installing it. See Accessories and Modifications on page 5-3. Figure out which audio system is in your vehicle, find out what your - 2006 GMC Canyon | Owner's Manual - Page 176
synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the hour and minute buttons at the same time increase or to decrease the volume. RCL (Recall): Press this knob to switch the display between the radio station frequency, band, and the time. When - 2006 GMC Canyon | Owner's Manual - Page 177
Finding a Station AM FM: Press this button to switch between FM1, FM2, or AM. The display will show the selection. TUNE: Turn this knob to select radio stations. Setting Preset Stations Up to 18 - 2006 GMC Canyon | Owner's Manual - Page 178
appear on the display. To adjust all tone and speaker controls to the middle position, first exit out of regular cab model. Adjusting the Speakers (Balance/Fade) AUDIO: To adjust the balance between the right and the left speakers, your GM dealer for service. LOC (Locked): This message is displayed when - 2006 GMC Canyon | Owner's Manual - Page 179
(RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming • Receive announcements concerning local and - 2006 GMC Canyon | Owner's Manual - Page 180
Canada (if available). XM™ offers over 100 coast-to-coast channels including music, news, sports, talk, and children's programming. XM™ provides digital quality audio and text information that includes song title and artist name. A service automatically to make up for road and wind noise as you - 2006 GMC Canyon | Owner's Manual - Page 181
Finding a Station BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (if equipped). The display will show the selection. Setting Preset Stations Up to 30 stations (six FM1, - 2006 GMC Canyon | Owner's Manual - Page 182
To adjust all tone and speaker controls to the middle position, push and hold the AUDIO knob when no tone or speaker control is displayed. ALL CENTERED treble to the manual mode, push and release the AUTO EQ button until CUSTOM appears on the display. Adjusting the Speakers (Balance/Fade) AUDIO - 2006 GMC Canyon | Owner's Manual - Page 183
alternate frequency off, press and hold BAND again for two seconds. AF OFF will appear on the display. The radio will not switch to other stations. This function does not apply for XM™ Satellite Radio Service of the emergency broadcast system. This feature is not supported by all RDS stations. 3-55 - 2006 GMC Canyon | Owner's Manual - Page 184
information symbol will appear on the display. Press this button to see the message. The message may display the artist, song title, call in phone numbers, etc. If the entire message is not displayed, parts does not apply to XM™ Satellite Radio Service. Radio Messages CAL ERR (Calibration Error): - 2006 GMC Canyon | Owner's Manual - Page 185
The system is working properly. No song title information is available at this time on this channel. The system is working properly. No Signl Loss of signal Loading Acquiring channel audio (after 4 second delay) Channel not in service Channel no longer available Artist Name/Feature not available - 2006 GMC Canyon | Owner's Manual - Page 186
No Text/Informational message available No channel available for the chosen category Theft lock active Action Required No category information is received after having your vehicle serviced, check with your GM dealer. If tuned to channel 0, this message will alternate with the XM™ Radio eight - 2006 GMC Canyon | Owner's Manual - Page 187
play the smaller 3 inch (8 cm) single CDs with an adapter ring. Full-size CDs and the smaller CDs are loaded in the same manner. If playing a CD in finding tracks, and/or difficulty in loading and ejecting. If these problems occur, check the bottom surface of the CD. If the surface of the CD is - 2006 GMC Canyon | Owner's Manual - Page 188
4 FWD (Forward): Press and hold this pushbutton to advance quickly within a track. Press and hold this pushbutton for less than two seconds to advance at six times the normal playing speed. Press and hold it for more than two seconds to advance at 17 times the normal playing speed. Release this - 2006 GMC Canyon | Owner's Manual - Page 189
It is usually better to burn the disc all at once. The system can support up to 11 folders in depth, though, keep the depth of the folders use more disc memory space than necessary. To conserve space on the disc, minimize the length of the file, folder or playlist names. You can also play an MP3 CD - 2006 GMC Canyon | Owner's Manual - Page 190
mode as the default display. See DISPL later in this section for more information. The new track name will appear on the display. File System and than 32 characters or four pages will be shortened. The display will not show parts of words on the last page of text and the extension of the filename - 2006 GMC Canyon | Owner's Manual - Page 191
play the smaller 3 inch (8 cm) single CDs with an adapter ring. Full-size CDs and the smaller CDs are loaded in the same manner. If playing a CD in finding tracks, and/or difficulty in loading and ejecting. If these problems occur, check the bottom surface of the CD. If the surface of the CD is - 2006 GMC Canyon | Owner's Manual - Page 192
3 REV (Reverse): Press and hold this pushbutton to reverse quickly within a track. Press and hold this pushbutton for less than two seconds to reverse at 10 times the normal playing speed. Press and hold it for more than two seconds to reverse at 20 times the normal playing speed. Release this - 2006 GMC Canyon | Owner's Manual - Page 193
DISPL (Display): Press this knob to switch between track mode, folder/playlist mode, and time of day mode. the artist name and album contained in the tag. INFO will disappear from the display when the information in the ID3 tag has finished. BAND: Press this button to listen to the radio when - 2006 GMC Canyon | Owner's Manual - Page 194
the road becomes smoother, the CD should play. • The CD is dirty, scratched, wet, or upside down. • The air is very humid. If so, wait about an hour and try again. • The format of the CD may not be compatible. See "MP3 Format" earlier in this section. • There may have been a problem - 2006 GMC Canyon | Owner's Manual - Page 195
Information volume, the audio system will adjust automatically to make up for road and wind noise as you drive by increasing the volume as vehicle OFF appears on the display. Finding a Station BAND: Press this button to switch between FM1, FM2, or AM. The display will show the selection. o - 2006 GMC Canyon | Owner's Manual - Page 196
no tone or speaker controls are displayed. ALL CENTERED will appear on the display and you will hear a beep. AUTO EQ (Automatic Equalization): Press this button to select customized equalization settings designed for country/western, jazz, talk, pop, rock, and classical. To return to the manual mode - 2006 GMC Canyon | Owner's Manual - Page 197
knob while no tone or speaker controls are displayed. ALL CENTERED will appear on the display and you will hear a beep. Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio - 2006 GMC Canyon | Owner's Manual - Page 198
in the PTY. 4. Press either the TYPE or the SCAN arrows to stop scanning. 3-70 BAND (Alternate Frequency): Alternate frequency allows the radio to switch to a stronger station with the same program type. To turn alternate frequency on, press and hold BAND for two seconds. AF ON will appear on the - 2006 GMC Canyon | Owner's Manual - Page 199
Information): If the current station has a message, INFO will appear on the display. Press this button to see the message. The message may display the artist, song title, call in phone numbers, etc. If the entire message is not displayed, parts ring. Full-size CDs and these problems occur, check the - 2006 GMC Canyon | Owner's Manual - Page 200
up to six CDs. To insert one CD, do the following: 1. Turn the ignition on. 2. Press and release the LOAD button. 3. Wait for the indicator light, located to the right of the slot, to turn green. 4. Load a CD. Insert the CD partway into the slot, label side up. The player will - 2006 GMC Canyon | Owner's Manual - Page 201
eject button to eject a CD after you have tried to push it in manually. The player's 25-second eject timer will reset at each press of eject The CD will eject and can be removed. Once the CD is removed, the indicator light will begin flashing again and another CD will eject. To stop ejecting the CDs, - 2006 GMC Canyon | Owner's Manual - Page 202
(Automatic Equalization): Press AUTO EQ to select the equalization setting while playing a CD. The equalization will be stored whenever a CD is played. For more information on AUTO EQ, see "AUTO EQ" listed previously in this section. • To repeat the CD you are listening to, press and hold the RPT - 2006 GMC Canyon | Owner's Manual - Page 203
INFO (Information): Press this knob to see how long the current track has been playing. on and load it with at least one CD. See "LOAD CD" listed previously in this section for more information. 2. Check to see that the CD changer is not in song list mode. S-LIST should not appear on the display. If - 2006 GMC Canyon | Owner's Manual - Page 204
To delete tracks from the song list, perform the following steps: 1. Turn the CD player on. 2. Press the SONG LIST button to turn song list on. S-LIST will appear on the display. 3. Press either SEEK or TYPE arrow to select the desired track to be deleted. 4. Press and hold the SONG LIST button for - 2006 GMC Canyon | Owner's Manual - Page 205
the road becomes smoother, the CD should play. • The CD is dirty, scratched, wet, or upside down. • The air is very humid. If so, wait about an hour and try again. • There may have been a problem while burning the CD. Theft-Deterrent Feature (RDS Radios) THEFTLOCK® is designed to discourage theft - 2006 GMC Canyon | Owner's Manual - Page 206
. If there is interference or static, unplug the item from the accessory power outlet. XM™ Satellite Radio Service XM™ Satellite Radio Service gives digital radio reception from coast-to-coast in the 48 contiguous United States, and in Canada (if available). Just as with FM, tall buildings or hills - 2006 GMC Canyon | Owner's Manual - Page 207
a factory radio or chime module will disable vehicle chimes. Fixed Mast Antenna The fixed mast antenna can withstand most car washes without being damaged. If the mast should ever become slightly bent, straighten it out by hand. If the mast is badly bent, replace it. Check occasionally to make sure - 2006 GMC Canyon | Owner's Manual - Page 208
✍ NOTES 3-80 - 2006 GMC Canyon | Owner's Manual - Page 209
Chassis Cab ...4-49 Towing ...4-50 Towing Your Vehicle ...4-50 Recreational Vehicle Towing ...4-50 Towing a Trailer ...4-56 Trailer Recommendations ...4-68 Your Driving, the Road, and Your Vehicle ...4-2 Defensive Driving ...4-2 Drunken Driving ...4-3 Control of a Vehicle ...4-6 Braking ...4-6 Anti - 2006 GMC Canyon | Owner's Manual - Page 210
is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. See Safety Belts: They Are for Everyone on page 1-13. {CAUTION: Defensive driving really means "Be ready for anything." On city streets, rural roads, or expressways, it means "Always expect the - 2006 GMC Canyon | Owner's Manual - Page 211
highway safety problem is for information on the problem . The Blood Alcohol Concentration (BAC) of someone who is drinking depends upon four things: Judgment Muscular Coordination Vision Attentiveness • The amount of alcohol consumed • The drinker's body weight • The length of time - 2006 GMC Canyon | Owner's Manual - Page 212
, this means that a woman generally will reach a higher BAC level than a man of her same body weight will when each has the same number of drinks. The law in most U.S. states, and throughout Canada, sets the legal limit at 0.08 percent. In some other countries, the limit is even lower. For example - 2006 GMC Canyon | Owner's Manual - Page 213
The body takes about an hour to rid itself of the alcohol in one drink. No amount of coffee or number of if you drive after drinking. Please do not drink and drive or ride with a driver who has been drinking. Ride home in a cab; or if you are with a group, designate a driver who will not drink. 4-5 - 2006 GMC Canyon | Owner's Manual - Page 214
of those control systems than the tires and road can provide. That means you can lose control of your vehicle. Adding non-GM accessories can affect your vehicle's performance. See Accessories and Modifications on page 5-3. Braking See Brake System Warning Light on page 3-30. Braking action involves - 2006 GMC Canyon | Owner's Manual - Page 215
start your engine and begin to drive away, your anti-lock brake system will check itself. You may hear a momentary motor or clicking noise while this test is going on. This is normal. If there is a problem with the anti-lock brake system, this warning light will stay on. See Anti-Lock Brake System - 2006 GMC Canyon | Owner's Manual - Page 216
suddenly slows or stops. Always leave enough room up ahead to stop, even though you have anti-lock brakes. Using Anti-Lock Do not pump the brakes. Just hold the brake pedal down firmly and let anti-lock work for you. You may feel the brakes vibrate, or you may notice some noise, but this is normal - 2006 GMC Canyon | Owner's Manual - Page 217
, Ice or Snow on page 4-42 for more information. Adding non-GM accessories can affect your vehicle's performance. See Accessories and Modifications on page 5-3 for more information. When the traction control system is turned off, an indicator light on the button will illuminate. If your vehicle is - 2006 GMC Canyon | Owner's Manual - Page 218
suddenly accelerate. Both control systems - steering and acceleration - have to do their work where the tires meet the road. Adding the sudden gently into the straightaway. Adding non-GM accessories can affect your vehicle's performance. See Accessories and Modifications on page 5-3. Steering Tips - 2006 GMC Canyon | Owner's Manual - Page 219
braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you. You can avoid these problems by braking driving at all times and wear safety belts properly. 4-11 - 2006 GMC Canyon | Owner's Manual - Page 220
to face with the worst of all traffic accidents - the head-on collision. So here are some tips for passing: • Drive ahead. Look down the road, to the sides and to crossroads for situations that might affect your passing patterns. If you have any doubt whatsoever about making a successful pass, wait - 2006 GMC Canyon | Owner's Manual - Page 221
ahead suddenly slows or stops. Keep back a reasonable distance. • Check your mirrors, glance over your shoulder, and start your left lane time on two-lane roads. Reconsider before passing the next vehicle. • Do not overtake a slowly moving vehicle too rapidly. Even though the brake lamps are not - 2006 GMC Canyon | Owner's Manual - Page 222
, ice, gravel, or other material is on the road. For safety, you will want to slow down and adjust your road to make a mirrored surface - and slow down when you have any doubt. Remember: Any Anti-Lock Brake System (ABS) helps avoid only the braking skid. Skidding In a skid, a driver can lose control - 2006 GMC Canyon | Owner's Manual - Page 223
. For example, be sure to have all necessary maintenance and service work done. Check to make sure all underbody shields, if equipped, are properly attached. Be sure you read all the information about your four-wheel-drive vehicle in this manual. Is there enough fuel? Is the spare tire fully inflated - 2006 GMC Canyon | Owner's Manual - Page 224
the load floor and forward of the rear axle. Put heavier items as far forward as you can. • Be sure the load is secured properly, so driving on the off-road terrain does not toss things around. • • You will find other important information in this manual. See Loading Your Vehicle on page 4-44 and - 2006 GMC Canyon | Owner's Manual - Page 225
to get bad surprises. Get accurate maps of trails and terrain. Try to learn of any blocked or closed roads. It is also a good idea to Your ears need to listen for unusual tire or engine sounds. With your arms, hands, feet, and body, you will need to respond to vibrations and 's exhaust system. 4-17 - 2006 GMC Canyon | Owner's Manual - Page 226
, sliding, wheel spinning, delayed acceleration, poor traction, and longer braking distances. Surface Obstacles: Unseen or hidden obstacles can be hazardous. cause you to lose control and crash. So, whether you are driving on or off the road, you and your passengers should wear safety belts. • Is - 2006 GMC Canyon | Owner's Manual - Page 227
. If this happens, even with one or two wheels, you cannot control the vehicle as well or at all. Because you will be on braking. In a way, off-road driving requires a different kind of alertness from driving on paved roads and highways. There are no road signs, posted speed limits, or signal lights - 2006 GMC Canyon | Owner's Manual - Page 228
Approaching a Hill When you approach a hill, you need to decide if it is one of those hills that is just too steep to climb, descend, or cross. Steepness can be hard to judge. On a very small hill, for example, there may be a smooth, constant incline with only a small change in elevation where you - 2006 GMC Canyon | Owner's Manual - Page 229
still applied, shift the transmission to PARK (P), or shift to NEUTRAL if your vehicle has a manual transmission, and restart the engine. Then, shift to REVERSE (R), release the parking brake, and slowly back down the hill as straight as possible in REVERSE (R). As you are backing down the hill - 2006 GMC Canyon | Owner's Manual - Page 230
clutch if your vehicle has a manual transmission, to rev-up the engine and regain forward momentum. This will not work. Your vehicle will roll backwards very quickly and you could go out of control. Instead, apply the regular brake roading takes you downhill Is there a hidden creek bank or even a - 2006 GMC Canyon | Owner's Manual - Page 231
to overheat and fade. This could cause loss of control and a serious accident. Apply the brakes lightly when descending a hill and use a low gear to keep vehicle speed under control. NEUTRAL (N), or with the clutch pedal pressed down with a manual transmission. This is called "free-wheeling." The - 2006 GMC Canyon | Owner's Manual - Page 232
road you go straight up or down a hill, the length of the wheel base - the distance from the front Also, driving across an incline puts more weight on the downhill wheels. This could cause What should I do? • Surface conditions can be a problem when you drive across a hill. Loose gravel, muddy spots - 2006 GMC Canyon | Owner's Manual - Page 233
If your vehicle stalls when you are crossing an incline, be sure you, and any passengers, get out on the uphill side, even if the door there is harder to open. If you get out on the downhill side and the vehicle starts to roll over, you will be right in - 2006 GMC Canyon | Owner's Manual - Page 234
, and you will need longer braking distances. It is best to use effect on steering, accelerating, and braking. Drive at a reduced speed is very easy to lose control. On wet ice, for difficult braking can cause you to slide out of control. axles, or exhaust pipe, do not try it - you - 2006 GMC Canyon | Owner's Manual - Page 235
braking. Check the body structure, steering, suspension, wheels, tires, and exhaust system for damage. Also, check the fuel lines and cooling system for any leakage. Your vehicle will require more frequent service due to off-road use. Refer to the maintenance schedule for additional information - 2006 GMC Canyon | Owner's Manual - Page 236
- by alcohol or drugs, with night vision problems, or by fatigue. Here are some tips on to wear sunglasses. Your eyes will have less trouble adjusting to night. But if you are driving, on higher speed roads. Your vehicle's headlamps can light up only so much road ahead. • In remote areas, watch - 2006 GMC Canyon | Owner's Manual - Page 237
should be checked regularly for proper aim, so should your eyes be examined regularly. Some drivers suffer from night blindness - the inability to see in dim light - and are not even aware of it. Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you - 2006 GMC Canyon | Owner's Manual - Page 238
road signs and traffic signals, pavement markings, the edge of the road , and even people walking. It is wise to keep your wiping equipment in good shape and keep your windshield washer fluid reservoir filled with washer fluid. Replace problems, too. The water may affect your brakes road the road. If - 2006 GMC Canyon | Owner's Manual - Page 239
standing water, water can come in through your engine's air intake and badly damage your engine. Never drive through water that is slightly lower clear room ahead, and be prepared to have your view restricted by road spray. Driving Through Flowing Water • Have good tires with proper tread depth - 2006 GMC Canyon | Owner's Manual - Page 240
City Driving Here are ways to increase your safety in city driving: • Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip. • Try to use the freeways that rim and crisscross - 2006 GMC Canyon | Owner's Manual - Page 241
the flow. Try to merge into the gap at close to the prevailing speed. Switch on your turn signal, check your mirrors, and glance over your shoulder as often as necessary. Try to blend expressways, turnpikes, or superhighways - are the safest of all roads. But they have their own special rules. 4-33 - 2006 GMC Canyon | Owner's Manual - Page 242
check your 's work - do not plan to make too many miles that first part of the journey. Wear comfortable clothing and shoes you can easily drive in. serviced and maintained, it is ready to go. If it needs service, have it done before starting out. Of course, you will find experienced and able service - 2006 GMC Canyon | Owner's Manual - Page 243
have up-to-date maps? • Make sure your vehicle is well ventilated, with a comfortably cool interior. • Keep your eyes moving. Scan the road ahead and to the sides. Check your mirrors and your instruments frequently. • If you get sleepy, pull off the road into a rest, service, or parking area and - 2006 GMC Canyon | Owner's Manual - Page 244
trips safer and more enjoyable. See Off-Road Driving on page 4-15 for information about driving off-road. • Keep your vehicle in good shape. Check all fluid levels and also the brakes, tires, cooling system, and transmission. These parts can work hard on mountain roads. {CAUTION: If you do not shift - 2006 GMC Canyon | Owner's Manual - Page 245
braking or even none going down a hill. You could crash. Always have your engine running and your vehicle in gear when you go downhill. roads mountains that warn of special problems. Examples are long grades, passing or no-passing zones, a falling rocks area, or winding roads. Be alert to these and - 2006 GMC Canyon | Owner's Manual - Page 246
vehicle. Driving on Snow or Ice Most of the time, those places where the tires meet the road probably have good traction. However, if there is snow or ice between the tires and the road, you can have a very slippery situation. You will have a lot less traction, or grip, and will need - 2006 GMC Canyon | Owner's Manual - Page 247
more. Your Anti-Lock Brake System (ABS) improves your vehicle's stability when you make a hard stop on a slippery road. Even though you have ABS, you will ice until salt and sand crews can get there. until you hit a spot that is covered with ice. On an otherwise clear road, ice patches may appear in - 2006 GMC Canyon | Owner's Manual - Page 248
have been stopped by the snow. • Put on extra clothing or wrap a blanket around you. If you do not have blankets or extra clothing, make body insulators from newspapers, burlap bags, rags, floor mats - anything you can wrap around yourself or tuck under your clothing to keep warm. You can run - 2006 GMC Canyon | Owner's Manual - Page 249
idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and it keeps the battery charged. You will need a well-charged battery to restart the vehicle, and possibly for signaling later on with your headlamps. Let the heater run for a while. Then, shut the engine - 2006 GMC Canyon | Owner's Manual - Page 250
information Control System (TCS) on page 4-9. Then shift back and forth between REVERSE (R) and a forward gear, or with a manual transmission, between FIRST (1) or SECOND (2) and REVERSE (R), spinning the wheels as little as possible. Release the accelerator pedal while you shift, and press lightly - 2006 GMC Canyon | Owner's Manual - Page 251
The hooks are provided at the front of your vehicle. You may need to use them if you are stuck off-road and need to be pulled to some place where you can continue driving. {CAUTION: These hooks, when used, are the vehicle. Your vehicle could be damaged and it would not be covered by warranty. 4-43 - 2006 GMC Canyon | Owner's Manual - Page 252
label and the Certification/Tire label. Tire and Loading Information Label {CAUTION: Do not load your vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). If you do, parts on your vehicle can break, and it can change - 2006 GMC Canyon | Owner's Manual - Page 253
Inflation - Tire Pressure on page 5-61. There is also important information on the Certification/Tire label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axles. See "Certification/Tire Label" later in this section. 4. The resulting - 2006 GMC Canyon | Owner's Manual - Page 254
150 lbs (68 kg) x 2 = Available Cargo Weight = Total 1,000 lbs (453 kg) 300 lbs (136 kg) 700 lbs (317 kg) Item A B C Example 2 Description Vehicle Capacity Weight for Example 2 = Subtract Occupant Weight 150 lbs (68 kg) x 5 = Available Cargo Weight = Total 1,000 lbs (453 kg) 750 lbs (340 kg) 250 - 2006 GMC Canyon | Owner's Manual - Page 255
to the edge of the driver's side, extended cab door, below the door latch post. The label shows the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, cargo, and trailer tongue weight, if pulling a trailer. The Certification/Tire label also tells - 2006 GMC Canyon | Owner's Manual - Page 256
Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). If you do, parts on your vehicle can break, and it can change the way your vehicle handles. These could cause you to lose control and crash. Also, overloading can shorten the life of your vehicle. Using - 2006 GMC Canyon | Owner's Manual - Page 257
regulations. Remember not to exceed the Gross Axle Weight Rating (GAWR) of the rear axle. Truck-Camper Loading Information Your vehicle was not designed to carry a slide-in camper. Pickup Conversion to Chassis Cab General Motors is aware that some vehicle owners may consider having the pickup box - 2006 GMC Canyon | Owner's Manual - Page 258
Your Vehicle Consult your dealer or a professional towing service if you need to have your disabled vehicle towed. the ground, the drivetrain components could be damaged. The repairs would not be covered by your warranty. Do not tow your vehicle with all four wheels on the ground. Two-wheel-drive - 2006 GMC Canyon | Owner's Manual - Page 259
six weeks or more, remove the battery cable from the negative terminal (post) of the battery to prevent your battery from draining while towing. After the parking brake. See Parking Brake on page 2-28 for more information. 3. Put an automatic transmission in PARK (P) or a manual transmission in - 2006 GMC Canyon | Owner's Manual - Page 260
damaged. The repairs would not be covered by your warranty. Never tow your vehicle with the rear wheels on brake. See Parking Brake on page 2-28 for more information. 3. Put an automatic transmission in PARK (P) or a manual transmission in FIRST (1). 4. Follow the dolly manufacturer's instructions - 2006 GMC Canyon | Owner's Manual - Page 261
six weeks or more, remove the battery cable from the negative terminal (post) of the battery to prevent your battery from draining while towing. After towing parking brake. See Parking Brake on page 2-28 for more information. 3. Put an automatic transmission in PARK (P) or a manual transmission in - 2006 GMC Canyon | Owner's Manual - Page 262
(post) of the battery to prevent your battery from draining while towing. Four-Wheel-Drive Vehicles Use the following procedure to tow your vehicle from the rear: 1. Drive the vehicle onto the dolly. 2. Firmly set the parking brake. See Parking Brake on page 2-28 for more information. 3. Put an - 2006 GMC Canyon | Owner's Manual - Page 263
instructions to attach and secure the vehicle being towed to the dolly and then the loaded dolly to the tow vehicle. For manual page 2-24 for more information. 6. Release the parking brake only after the vehicle battery cable from the negative terminal (post) of the battery to prevent your battery - 2006 GMC Canyon | Owner's Manual - Page 264
should read the information in "Weight of the Trailer" that appears later in this section. Trailering is different than just driving your vehicle by itself. Trailering means changes in handling, acceleration, braking, durability and fuel economy. Successful, safe trailering takes correct equipment - 2006 GMC Canyon | Owner's Manual - Page 265
upon your vehicle model and options. • Consider using a sway control. You can ask a hitch dealer about sway controls. • Don't tow a trailer at all during the first 500 miles (800 km) your new vehicle is driven. Your engine, axle or other parts could be damaged. • Then, during the first 500 miles - 2006 GMC Canyon | Owner's Manual - Page 266
, 3.5L Engine Vehicle* 2WD Extended Cab Automatic Transmission, 2.8 L Engine Automatic Transmission, 3.5L Engine Automatic Transmission, 3.5L Engine Manual Transmission, 2.8L Engine 4-58 Axle Ratio 3.73 3.42 3.73 3.42 3.73 3.42 3.73 Axle Ratio 3.73 3.42 3.73 3.42 Maximum Trailer Weight 3,300 lbs - 2006 GMC Canyon | Owner's Manual - Page 267
, 3.5L Engine Manual Transmission, 2.8L Engine Manual Transmission, 2.8L Engine Vehicle* 4WD Regular Cab Automatic Transmission, 2.8L Engine Automatic Transmission, 2.8L Engine Axle Ratio 3.73 3.42 3.73 Axle Ratio 3.73 3.42 3.73 3.42 3.73 Axle Ratio 3.73 4.10 Maximum Trailer Weight 2,100 lbs - 2006 GMC Canyon | Owner's Manual - Page 268
3.5L Engine Vehicle* 4WD Extended Cab Automatic Transmission, 2.8L Engine Automatic Transmission, 2.8L Engine Automatic Transmission, 3.5L Engine Automatic Transmission, 3.5L Engine 4-60 Axle Ratio 3.42 3.73 4.10 3.73 4.10 3.42 3.73 4.10 Axle Ratio 3.73 4.10 3.42 3.73 Maximum Trailer Weight 4,000 - 2006 GMC Canyon | Owner's Manual - Page 269
3.5L Engine Vehicle* 4WD Crew Cab Automatic Transmission, 2.8L Engine Automatic Transmission, 2.8L Engine Automatic Transmission, 3.5L Engine Automatic Transmission, 3.5L Engine Automatic Transmission, 3.5L Engine Manual Transmission, 2.8L Engine Axle Ratio 4.10 4.10 3.42 3.73 4.10 Axle Ratio 3.73 - 2006 GMC Canyon | Owner's Manual - Page 270
in your Warranty and Owner Assistance Information Booklet. In Canada, write to: General Motors of Canada Limited Customer Communication Centre, 163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure - 2006 GMC Canyon | Owner's Manual - Page 271
and 2,700 lbs (1 225 kg) at the rear axle. It has a GVWR of 7,200 lbs (3 266 kg), a RGAWR of 4,000 lbs (1 814 kg) and a GCWR (Gross Combination Weight Rating) of 14,000 lbs (6 350 kg). The trailer rating should be: Since the rear axle already weighs 2,700 lbs (1 225 kg), adding 1,275 lbs (578 kg - 2006 GMC Canyon | Owner's Manual - Page 272
driver's door above the door latch, or see Loading Your Vehicle on page 4-44. Then be sure you don't go over the GVWR limit for your vehicle, including the weight of the trailer tongue. Hitches It's important to have the correct hitch equipment. Crosswinds, large trucks going by and rough roads are - 2006 GMC Canyon | Owner's Manual - Page 273
• The trailer parts can withstand 3,000 psi (20 650 kPa) of pressure. • The trailer's brake system will use less than 0.02 cubic inch (0.3 cc) of fluid from your vehicle's master cylinder. Otherwise, both braking systems won't work well. You could even lose your brakes. If everything checks out this - 2006 GMC Canyon | Owner's Manual - Page 274
someone guide you. When towing a trailer, the arrows on your instrument panel will flash for turns even if the bulbs on the trailer are burned out. Thus, you may think drivers behind you are seeing your signal when they are not. It's important to check occasionally to be sure the trailer bulbs are - 2006 GMC Canyon | Owner's Manual - Page 275
information. 6. Release the regular brakes. When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down while you: • start your engine, • shift into a gear, and • release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer - 2006 GMC Canyon | Owner's Manual - Page 276
will need service more often when you're pulling a trailer. See Scheduled Maintenance on page 6-4 for more on this. Things that are especially important in trailer operation are automatic transmission fluid (don't overfill), engine oil, axle lubricant, belt, cooling system and brake system. Each - 2006 GMC Canyon | Owner's Manual - Page 277
Pressure Cap ...5-28 Engine Overheating ...5-28 Cooling System ...5-30 Engine Fan Noise ...5-35 Power Steering Fluid ...5-35 Windshield Washer Fluid ...5-36 Brakes ...5-37 Battery ...5-41 Jump Starting ...5-42 Rear Axle ...5-46 Four-Wheel Drive ...5-46 Front Axle ...5-47 Bulb Replacement ...5-48 - 2006 GMC Canyon | Owner's Manual - Page 278
Sheet Metal Damage ...5-99 Finish Damage ...5-99 Underbody Maintenance ...5-99 Chemical Paint Spotting ...5-100 Vehicle Care/Appearance Materials ...5-100 Vehicle Identification ...5-101 Vehicle Identification Number (VIN) ...5-101 Service Parts Identification Label ...5-101 Electrical System ...5-101 - 2006 GMC Canyon | Owner's Manual - Page 279
trained and supported service people. We hope you will want to keep your GM vehicle all GM. Genuine GM parts have one of these marks: Accessories and Modifications When you add non-GM accessories to your vehicle they can affect your vehicle's performance and safety, including such things as, braking - 2006 GMC Canyon | Owner's Manual - Page 280
Information on page 7-15. Your vehicle has an airbag system. Before attempting to do your own service work, see Servicing Your Airbag-Equipped Vehicle on page 1-77. You should keep a record with all parts receipts and list the mileage and the date of any service work you perform. See Maintenance - 2006 GMC Canyon | Owner's Manual - Page 281
If you are using gasoline rated at 87 octane or higher and you hear heavy knocking, your engine needs service. Fuel Use of the recommended fuel is an important part of the proper maintenance of your vehicle. Gasoline Specifications At a minimum, gasoline should meet ASTM specification D 4814 in the - 2006 GMC Canyon | Owner's Manual - Page 282
warranty. Additives To provide cleaner air, all gasolines in the United States are now required to contain additives that will help prevent engine and fuel system deposits from forming, allowing your emission control and prevent most deposit-related problems. Gasolines containing oxygenates, such - 2006 GMC Canyon | Owner's Manual - Page 283
outside the United States or Canada, the proper fuel may be hard to find. Never use leaded gasoline or any other fuel not recommended in the previous text on fuel. Costly repairs caused by use of improper fuel would not be covered by your warranty. To check the fuel availability, ask an auto club - 2006 GMC Canyon | Owner's Manual - Page 284
some places. Keep children away from the fuel pump; never let children pump fuel. The tethered fuel cap is located behind a hinged fuel door on the driver's side of the vehicle. To remove the fuel cap, turn it slowly counterclockwise. While refueling, hang the tethered fuel cap from the hook on the - 2006 GMC Canyon | Owner's Manual - Page 285
check engine light will be lit on the instrument panel cluster. See DIC Warnings and Messages on page 3-42 and Malfunction Indicator Lamp on page 3-32 for more information. {CAUTION: If a fire starts while you are refueling, do not remove the nozzle. Shut off the flow of fuel by shutting off the pump - 2006 GMC Canyon | Owner's Manual - Page 286
Filling a Portable Fuel Container Checking Things Under the Hood {CAUTION: Never fill a portable fuel container while it not smoke while pumping gasoline. {CAUTION: Things that burn can get on hot engine parts and start a fire. These include liquids like fuel, oil, coolant, brake fluid, windshield - 2006 GMC Canyon | Owner's Manual - Page 287
all the filler caps are on properly. Then lift the hood to relieve pressure on the hood prop. Remove the hood prop from the slot in the hood and return the prop to its retainer. Lower the hood 10 to 12 inches (25 to 30 cm) above the vehicle and release it to latch fully. Check - 2006 GMC Canyon | Owner's Manual - Page 288
Engine Compartment Overview When you open the hood on the 2.8L engine (3.5L engine similar), you will see the following: 5-12 - 2006 GMC Canyon | Owner's Manual - Page 289
Compartment Fuse Block on page 5-103. M. Battery. See Battery on page 5-41. N. Hydraulic Clutch Fluid Reservoir (If Equipped). See Hydraulic Clutch on page 5-24. Engine Oil Checking Engine Oil It is a good idea to check your engine oil every time you get fuel. In order to get an accurate reading - 2006 GMC Canyon | Owner's Manual - Page 290
for the location of the engine oil fill cap. If the oil is below the cross-hatched area (L), you will need to add at least one quart/liter of oil. But you must use the right kind. This section explains what kind of oil to use. For engine oil crankcase capacity, see Capacities - 2006 GMC Canyon | Owner's Manual - Page 291
Petroleum Institute (API). Look for two things: • GM6094M Your vehicle's engine requires oil meeting GM Standard GM6094M. You should look for and use only an oil that meets GM Standard GM6094M. You should look for this information on the oil container, and use only those oils that are identi - 2006 GMC Canyon | Owner's Manual - Page 292
the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which who will perform this work using genuine GM parts and reset the system. It is also important to check your oil regularly and keep it at the - 2006 GMC Canyon | Owner's Manual - Page 293
it in the trash, pouring it on the ground, into sewers, or into streams or bodies of water. Instead, recycle it by taking it to a place that collects used oil. If you have a problem properly disposing of your used oil, ask your dealer, a service station or a local recycling center for help. 5-17 - 2006 GMC Canyon | Owner's Manual - Page 294
compartment on the passenger's side of the vehicle. See Engine Compartment Overview on page 5-12 for more information on location. 2. Lift out the engine air cleaner/filter. 3. Inspect or replace the air filter. See Normal Maintenance Replacement Parts on page 6-15 to determine which filter to use - 2006 GMC Canyon | Owner's Manual - Page 295
in place when you are driving. When to Check and Change Automatic Transmission Fluid A good time to check your automatic transmission fluid level is when the engine oil is changed. Change the fluid and filter at the intervals listed in Additional Required Services on page 6-6, and be sure to use the - 2006 GMC Canyon | Owner's Manual - Page 296
service department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick. Notice: Too much or too little fluid can damage your transmission. Too much can mean that some of the fluid could come out and fall on hot engine part or exhaust - 2006 GMC Canyon | Owner's Manual - Page 297
, place the shift lever in PARK (P). 3. With your foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds in each range. Then, position the shift lever in PARK (P). 4. Let the engine run at idle for three minutes or more. Then, without shutting off the - 2006 GMC Canyon | Owner's Manual - Page 298
the engine oil is changed. However, the fluid in your manual transmission does not require changing. How to Check Because this operation can be a little difficult, you may choose to have this done at your GM dealership service department. If you do it yourself, be sure to follow all the instructions - 2006 GMC Canyon | Owner's Manual - Page 299
to Add Fluid Here is how to add fluid. Refer to the Maintenance Schedule to determine what kind of fluid to use. See Recommended Fluids and filler plug. Be sure the plug is fully seated. 1. Remove the filler plug. 2. Check that the lubricant level is up to the bottom of the filler plug hole. 3. If the - 2006 GMC Canyon | Owner's Manual - Page 300
will not correct a leak. A fluid loss in this system could indicate a problem. Have the system inspected and repaired. Refer to the Maintenance Schedule to determine how often you should check the fluid level in your clutch master cylinder reservoir and for the proper fluid. See Recommended Fluids and - 2006 GMC Canyon | Owner's Manual - Page 301
® may cause premature engine, heater core, or radiator corrosion. In addition, the engine coolant may require changing sooner, at the first maintenance service after each 25,000 miles (41 500 km) or 24 months, whichever occurs first. Any repairs would not be covered by your warranty. Always use DEX - 2006 GMC Canyon | Owner's Manual - Page 302
could overheat and be badly damaged. The repair cost would not be covered by your warranty. Too much water in the mixture can freeze and crack the engine, radiator, heater core and other parts. Notice: If you use extra inhibitors and/or additives in your vehicle's cooling system, you could damage - 2006 GMC Canyon | Owner's Manual - Page 303
Never turn the radiator pressure cap - even a little - when the engine and radiator are hot. engine parts. Coolant contains ethylene glycol, and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. Occasionally check the coolant level in the radiator. For information - 2006 GMC Canyon | Owner's Manual - Page 304
installed, coolant loss and possible engine damage may occur. Be sure the cap is properly and tightly secured. See Engine Compartment Overview on page 5-12 for more information on location. If Steam Is Coming From Your Engine {CAUTION: Steam from an overheated engine can burn you badly, even - 2006 GMC Canyon | Owner's Manual - Page 305
or so: 1. In heavy traffic, let the engine idle in NEUTRAL while stopped. If it is safe to do so, pull off the road, shift to PARK (P) or NEUTRAL and let the engine idle. 2. Turn off the air conditioning. 3. Turn on your heater to full hot at the highest fan speed and open the windows as necessary - 2006 GMC Canyon | Owner's Manual - Page 306
Cooling System When you decide it is safe to lift the hood, here is what you will see: A. Coolant Recovery Tank B. Engine Cooling Fan C. Radiator Pressure Cap If the coolant inside the coolant recovery tank is boiling, do not do anything else until it cools down. The vehicle should be parked on a - 2006 GMC Canyon | Owner's Manual - Page 307
pedal down. If it does not, your vehicle needs service. Turn off the engine. Notice: Engine damage from running your engine without coolant is not covered by your warranty. Notice: Using coolant other than DEX-COOL® may cause premature engine, heater core or radiator corrosion. In addition, the - 2006 GMC Canyon | Owner's Manual - Page 308
of clean, drinkable water and DEX-COOL® engine coolant at the coolant recovery tank. See Engine Coolant on page 5-25 for more information. Notice: In cold weather, water can freeze and crack the engine, radiator, heater core and other parts. Use the recommended coolant and the proper coolant - 2006 GMC Canyon | Owner's Manual - Page 309
for that to stop. A hiss means there is still some pressure left. 2. Then keep turning the cap to remove it. 3. Fill the radiator with the proper DEX-COOL® coolant mixture, up to the base of the filler neck. See Engine Coolant on page 5-25 for more information about the proper coolant mixture. 5-33 - 2006 GMC Canyon | Owner's Manual - Page 310
for the engine cooling fan. 7. By this time, the coolant level inside the radiator filler neck may be lower. If the level is lower, add more of the proper DEX-COOL® coolant mixture through the filler neck until the level reaches the base of the filler neck. Then replace the pressure cap. At any - 2006 GMC Canyon | Owner's Manual - Page 311
Fan Noise This vehicle has a clutched engine cooling fan. When the clutch is engaged, the fan spins faster to provide more air to cool the engine. In most everyday driving conditions, the clutch is not engaged. This improves fuel economy and reduces fan noise. Under heavy vehicle loading, trailer - 2006 GMC Canyon | Owner's Manual - Page 312
Check Power Steering Fluid 1. Turn the key off and let the engine compartment cool down. 2. Wipe the cap and the top of the reservoir clean. 3. Unscrew the cap and wipe the dipstick with a clean rag. 4. Replace the cap and completely tighten it. 5. Then remove the cap 's instructions before - 2006 GMC Canyon | Owner's Manual - Page 313
Notice: Brakes Brake Fluid Your brake master cylinder reservoir is filled with DOT-3 brake fluid. See Engine Compartment Overview on page 5-12 for the location of the reservoir. • When using concentrated washer fluid, follow the manufacturer's instructions for adding water. • Do not mix water with - 2006 GMC Canyon | Owner's Manual - Page 314
will burn if the engine is hot enough. You or others could be burned, and your vehicle could be damaged. Add brake fluid only when work is done on the brake hydraulic system. See "Checking Brake Fluid" in this section. Refer to the Maintenance Schedule to determine when to check your brake fluid. See - 2006 GMC Canyon | Owner's Manual - Page 315
the reservoir. Notice: • Using the wrong fluid can badly damage brake system parts. For example, just a few drops of mineral-based oil, such as engine oil, in your brake system can damage brake system parts so badly that they will have to be replaced. Do not let someone put in the wrong kind of - 2006 GMC Canyon | Owner's Manual - Page 316
replaced, have the rear brakes inspected, too. Brake linings should always be replaced as complete axle sets. {CAUTION: The brake wear warning sound means that soon your brakes will not work well. That could lead to an accident. When you hear the brake wear warning sound, have your vehicle serviced - 2006 GMC Canyon | Owner's Manual - Page 317
on working around a battery without getting hurt. Battery Your vehicle has a maintenance free battery. When it is time for a new battery, get one that has the replacement number shown on the original battery's label. We recommend an ACDelco® replacement battery. See Engine Compartment Overview on - 2006 GMC Canyon | Owner's Manual - Page 318
Put an automatic transmission in PARK (P) or a manual transmission in NEUTRAL before setting the parking brake. If you have a four-wheel-drive vehicle, be sure the transfer case is not in NEUTRAL. Notice: If you leave your radio or other accessories on during the jump starting procedure, they could - 2006 GMC Canyon | Owner's Manual - Page 319
negative (−) jump starting terminal. See Engine Compartment Overview on page 5-12 for more information on the terminal locations. {CAUTION: Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables do - 2006 GMC Canyon | Owner's Manual - Page 320
dead battery. It goes to a heavy, unpainted metal engine part, or to a remote negative (−) terminal on the vehicle with the dead battery. battery and run the engine for a while. 11. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service - 2006 GMC Canyon | Owner's Manual - Page 321
vehicle. The repairs would not be covered by your warranty. Always connect and remove the jumper cables in the correct battery. 4. Disconnect the red positive (+) cable from the other vehicle. Jumper Cable Removal A. Heavy, Unpainted Metal Engine Part or Remote Negative (−) Terminal B. Good Battery - 2006 GMC Canyon | Owner's Manual - Page 322
. There are two additional systems that need lubrication. Transfer Case When to Check Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant. See Additional Required Services on page 6-6. How to Check Lubricant To get an accurate reading, the vehicle should be on - 2006 GMC Canyon | Owner's Manual - Page 323
check your front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. How to Check overtighten the plug. What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See - 2006 GMC Canyon | Owner's Manual - Page 324
bottom of the filler plug hole, located on the front axle, you may need to add some lubricant. When the Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 5-52. For any bulb changing procedure not listed in this section, contact your dealer. Halogen Bulbs - 2006 GMC Canyon | Owner's Manual - Page 325
assembly. A. Low-Beam Headlamp/DRL B. High-Beam Headlamp To replace the headlamp bulbs, do the following: 1. Open the hood. See Hood Release on page 5-11 for more information. 2. Reach in and access the bulb sockets from inside the engine compartment. 4. Unplug the electrical connector from the old - 2006 GMC Canyon | Owner's Manual - Page 326
Signal, Parking and Daytime Running Lamps (DRL) To replace one of these bulbs, do the following: 1. Open the hood. See Hood Release on page 5-11 for more information. 2. Reach in to access either one of the bulb sockets. 3. Turn the bulb socket counterclockwise and remove it from the lamp assembly - 2006 GMC Canyon | Owner's Manual - Page 327
-Mounted Stoplamp (CHMSL) To replace the CHMSL bulb, do the following: 1. Remove the two screws and lift off the lamp assembly. Taillamps, Turn Signal, Stoplamps and Back-up Lamps A. Stoplamp/Taillamp B. Turn Signal/Taillamp C. Back-up Lamp 2. Turn the bulb socket counterclockwise and remove it - 2006 GMC Canyon | Owner's Manual - Page 328
, do the following: 1. Open the tailgate. See Tailgate on page 2-9 for more information. 2. Remove the two rear lamp assembly screws near the tailgate latch. Replacement Bulbs Exterior Lamp Center High-Mounted Stoplamp (CHMSL) Headlamps Composite High-beam Composite Low-beam/Daytime Running Lamp - 2006 GMC Canyon | Owner's Manual - Page 329
blades should be inspected for wear and cracking. See Scheduled Maintenance on page 6-4 for more information. Replacement blades come in different types and are removed in different ways. For proper type and length, see Normal Maintenance Replacement Parts on page 6-15. Allowing the wiper blade arm - 2006 GMC Canyon | Owner's Manual - Page 330
end last, into the end with two blade claws (A). Slide the insert all the way through the blade claws at the opposite end (B). The plastic caps (C) will be forced off as the insert is fully inserted. 5. Be sure that the notches are locked by the bottom claws. Make sure that all - 2006 GMC Canyon | Owner's Manual - Page 331
warranty and where to obtain service, see your GM Warranty booklet for details. For additional information refer to the tire manufacturer's booklet included with your vehicle's Owner Manual worn, or if your tires have been damaged, replace them. {CAUTION: Poorly maintained and improperly used tires - 2006 GMC Canyon | Owner's Manual - Page 332
maximum pressure needed to support that load. Passenger Vehicle Tire Example (A) Tire Size: The tire size is a combination of letters and numbers used to define a particular tire's width, height, aspect ratio, construction type and service description. See the "Tire Size" illustration later in this - 2006 GMC Canyon | Owner's Manual - Page 333
ratio, construction type and service description. The letter T as the first character in the tire size means the tire is for temporary use only. (G) TPC Spec when a regular road tire has lost air and gone flat. See "Compact Spare Tire" under Spare Tire on page 5-92 for additional information. (B) Tire - 2006 GMC Canyon | Owner's Manual - Page 334
is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight: This means the combined weight of optional accessories. Some examples of optional accessories are, automatic transmission, power steering, power brakes, power windows, power seats, and air conditioning. 5-58 - 2006 GMC Canyon | Owner's Manual - Page 335
4-44. GAWR RR: Gross Axle Weight Rating for the rear axle, see Loading Your Vehicle on page 4-44. Intended Outboard Sidewall: The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. Kilopascal (kPa): The metric unit for air pressure. Light Truck (LT-Metric) Tire - 2006 GMC Canyon | Owner's Manual - Page 336
and some light duty trucks and multipurpose extend to the beads are laid at 90 degrees to the centerline of the tread. Rim: A metal support road surface. The amount of grip provided. Tread: The portion of a tire that comes into contact with the road 5-66. Vehicle Capacity Weight: The number of - 2006 GMC Canyon | Owner's Manual - Page 337
tire due to curb weight, accessory weight, occupant weight, and cargo weight. Vehicle Placard: A label permanently attached to a vehicle showing the vehicle's capacity weight and the original equipment tire size and recommended inflation pressure. See "Tire and Loading Information Label" under - 2006 GMC Canyon | Owner's Manual - Page 338
check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 5-64 and Wheel Replacement on page 5-68 for more information most important, see Scheduled Maintenance on page 6-4. How to Check Use a good quality pocket-type gage to check tire pressure. You - 2006 GMC Canyon | Owner's Manual - Page 339
parts vehicle's road tires and wheels, in size and type , do not include the spare in the tire rotation. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Tire and Loading Information label. For the location of the tire and loading information - 2006 GMC Canyon | Owner's Manual - Page 340
same performance and vehicle safety, during normal use, as the original tires. GM's exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure - 2006 GMC Canyon | Owner's Manual - Page 341
must replace your vehicle's tires with those that do not have a TPC Spec number, make sure they are the same size, Information Label. This label is attached to the vehicle's center pillar (B-pillar). See Loading Your Vehicle on page 4-44, for more information about the Tire and Loading Information - 2006 GMC Canyon | Owner's Manual - Page 342
as, antilock brakes; traction control; and electronic stability control, the light trucks may vary with respect to these grades, they must also conform to federal safety requirements and additional General Motors Tire Performance Criteria (TPC) standards. {CAUTION: If you add different sized - 2006 GMC Canyon | Owner's Manual - Page 343
in driving habits, service practices and differences in road characteristics and climate. must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B stop on wet pavement as measured under controlled conditions on specified government test on straight-ahead braking traction tests, and - 2006 GMC Canyon | Owner's Manual - Page 344
side or the other, the alignment may need to be checked. If you notice your vehicle vibrating when driving on a smooth road, your tires and wheels may need to be rebalanced. See your dealer for proper diagnosis. Wheel Replacement Replace any wheel that is bent, cracked or badly rusted or corroded - 2006 GMC Canyon | Owner's Manual - Page 345
wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis. See Changing a Flat Tire on page 5-72 for more information. {CAUTION: Putting a used - 2006 GMC Canyon | Owner's Manual - Page 346
could cause you to lose control of your vehicle and you or others may be injured in a crash. Use another type of traction device only if its manufacturer recommends it for use on your vehicle and tire size combination and road conditions. Follow that manufacturer's instructions. To help avoid damage - 2006 GMC Canyon | Owner's Manual - Page 347
under control by steering the way you want the vehicle to go. It may be very bumpy and noisy, but you can still steer. Gently brake to a stop, well off the road if possible. {CAUTION: Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety - 2006 GMC Canyon | Owner's Manual - Page 348
information. brake firmly. 2. Put an automatic transmission shift lever in PARK (P), or shift a manual transmission to FIRST (1) or REVERSE (R). CAUTION: (Continued) 3. If you have a four-wheel-drive vehicle, be sure the transfer case is in a drive gear - not in NEUTRAL. 4. Turn off the engine - 2006 GMC Canyon | Owner's Manual - Page 349
When your vehicle has a flat tire, use the following example as a guide to assist you in the placement of the wheel blocks. Removing the Spare Tire and Tools The tools you will need are located under the passenger's seat. Crew Cab The following information will tell you next how to use the jack and - 2006 GMC Canyon | Owner's Manual - Page 350
following: 1. Move the seats forward to access the cover. Regular/Extended Cab The vehicle will have a cover if it is an extended or regular cab. Extended/Regular Cab 2. Turn the wing nut on the cover counterclockwise to remove it. For crew cab models, reach under the rear seat to access the jack - 2006 GMC Canyon | Owner's Manual - Page 351
3. Remove the wheel blocks and the wheel block retainer by turning the wing nut counterclockwise. 4. Put the wheel blocks at the front and rear of the tire farthest away from the one being changed. That would be the tire on the other side, at the opposite end of the vehicle. 5. Locate the wing nut - 2006 GMC Canyon | Owner's Manual - Page 352
the wheel opening. 2. Insert the hoist end (chiseled end) of the extension tool (C) through the hole in the rear bumper and into the funnel-shaped guide. The chiseled end of the extension is used to lower the spare tire. 5. Put the spare tire near the flat tire. 5-76 - 2006 GMC Canyon | Owner's Manual - Page 353
Installing the Spare Tire Use the following pictures and instructions to remove the flat tire and raise the vehicle. 1. Remove the center cap by placing the chisel end of the wheel wrench (E) into one of the slots on the wheel and gently prying the cap out. The tools you will be using include - 2006 GMC Canyon | Owner's Manual - Page 354
slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. {CAUTION: 2. Use the wheel wrench to loosen all the wheel nuts by and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle. 5-78 - 2006 GMC Canyon | Owner's Manual - Page 355
Front Position 3. Position the jack (A) under the vehicle as shown for the front or rear locations. Front Position If the flat tire is on the front of the vehicle, position the jack to the rear of the front tire in the pocket off of the frame. 5-79 - 2006 GMC Canyon | Owner's Manual - Page 356
the wheel nuts and take off the flat tire. Rear Position If the flat tire is on the rear, position the jack under the rear axle and get as close as possible to the shock absorber. 4. Make sure the jack head is positioned so that the rear - 2006 GMC Canyon | Owner's Manual - Page 357
{CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident. When you - 2006 GMC Canyon | Owner's Manual - Page 358
9. Put the wheel nuts back on with the rounded end of the nuts toward the wheel. Tighten each wheel nut by hand. Then use the wheel wrench to tighten the nuts until the wheel is held against the hub. Front Position 5-82 - 2006 GMC Canyon | Owner's Manual - Page 359
accident. Be sure to use the correct wheel nuts. If you have to replace them, be sure to get new GM original equipment wheel nuts. Stop somewhere : Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the - 2006 GMC Canyon | Owner's Manual - Page 360
until it seats flush with the wheel. The cap only goes on one way. Be sure to line up the tab on the center cap with the indentation on the wheel. Before beginning this procedure read all the instructions. Failure to read and follow the instructions could damage the hoist assembly and you and - 2006 GMC Canyon | Owner's Manual - Page 361
To release the spare tire from the secondary latch, do the following: 1. Check under the vehicle to see if the cable end fitting is visible. 4. Repeat this procedure at least two times. If the spare tire lowers to - 2006 GMC Canyon | Owner's Manual - Page 362
(with the wheel blocks) under the vehicle towards the front of the rear bumper. Position the center lift point of the jack under the wheel. 9. Turn the wrench clockwise to raise the jack until it lifts the tire. 10. Continue raising the jack until the tire stops moving upward and is held - 2006 GMC Canyon | Owner's Manual - Page 363
inspected as soon as you can. You will not be able to store a spare or flat tire using the hoist assembly until it has been replaced. To continue changing the flat tire, see Removing the Flat Tire and Installing the Spare Tire on page 5-77. 5-87 - 2006 GMC Canyon | Owner's Manual - Page 364
, loose equipment could strike someone. Store all these in the proper place. Notice: Storing an aluminum wheel with a flat tire under your vehicle for an extended period of time or with the valve stem pointing up may damage the wheel. Always stow the wheel with the valve stem pointing down and - 2006 GMC Canyon | Owner's Manual - Page 365
wheel wrench and extensions together. 4. Insert the hoist end through the hole in the rear bumper and into the funnel-shaped guide. 5. Turn the wheel wrench clockwise to raise the tire part way up. Make sure the retainer is seated in the wheel opening and the valve stem is pointed down. 6. Raise - 2006 GMC Canyon | Owner's Manual - Page 366
the vehicle as shown next. 7. Make sure the tire is stored securely. Push, pull (A), and then try to turn (B) the tire. If the tire moves, check to make sure the tire valve stem is pointing down, then use the wheel wrench to loosen and then tighten the cable. 5-90 - 2006 GMC Canyon | Owner's Manual - Page 367
A. Jack B. Wheel Blocks C. Wing Nut Regular/Extended Cab Crew Cab A. Jack B. Wheel Blocks C. Wing Nut 5-91 - 2006 GMC Canyon | Owner's Manual - Page 368
A spare tire, whether compact-size or full-size, may lose air over time, so check its inflation pressure regularly. See Inflation - Tire Pressure on page 5-61 and Loading Your Vehicle on page 4-44 for information regarding proper tire inflation and loading your vehicle. For instruction on how to remove - 2006 GMC Canyon | Owner's Manual - Page 369
traction or four-wheel-drive conditions, repair or replace the full-size tire. Have the damaged or flat road tire repaired or replaced as soon as you can and installed back color to your home furnishings may also transfer color to your vehicle's interior. When cleaning your vehicle's interior, - 2006 GMC Canyon | Owner's Manual - Page 370
in your vehicle's breathing space. Before using cleaners, read and adhere to all safety instructions on the label. While cleaning your vehicle's interior, maintain adequate ventilation by opening your vehicle's doors and windows. Dust may be removed from small buttons and knobs using a small - 2006 GMC Canyon | Owner's Manual - Page 371
products, or those containing organic solvents to clean your vehicle's interior because they can alter the appearance by increasing the gloss in remove as much as possible and then vacuum. To clean, use the following instructions: 1. Saturate a lint-free, clean white cloth with water or club soda. - 2006 GMC Canyon | Owner's Manual - Page 372
plastic surfaces may permanently change the appearance and feel of your interior and are not recommended. Do not use silicone or wax- the windshield under certain conditions. Care of Safety Belts Keep belts clean and dry. {CAUTION: Do not bleach or dye safety belts. If you do, it may severely - 2006 GMC Canyon | Owner's Manual - Page 373
finish, the clearcoat gives more depth and gloss to the colored basecoat. Always use waxes and polishes that are non-abrasive such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from instructions under Washing Your Vehicle on page 5-97. - 2006 GMC Canyon | Owner's Manual - Page 374
high polish, is recommended for all bright metal parts. Aluminum Wheels Notice: If you use strong wheel(s). The repairs would not be covered by your warranty. Use only GM-approved cleaners on aluminum or chrome Check the wiper blades and clean them as necessary; replace blades that look worn. 5-98 - 2006 GMC Canyon | Owner's Manual - Page 375
your GM dealer's body and paint shop. Underbody Maintenance Chemicals used for ice and snow removal and dust control can collect on the underbody. If these are not removed, corrosion and rust can develop on the underbody parts such as fuel lines, frame, floor pan, and exhaust system even though they - 2006 GMC Canyon | Owner's Manual - Page 376
this, GM will repair, at no charge to the owner, the surfaces of new vehicles damaged by this fallout Glass Cleaner Usage Interior and exterior polishing cloth. Removes tar, road oil, and asphalt fine scratches, and other light surface contamination. Removes light scratches and protects finish. - 2006 GMC Canyon | Owner's Manual - Page 377
system. Before attempting to add anything electrical to your vehicle, see Servicing Your Airbag-Equipped Vehicle on page 1-77. 5-101 Engine Identification The eighth character in the VIN is the engine code. This code will help you identify your vehicle's engine, specifications, and replacement parts. - 2006 GMC Canyon | Owner's Manual - Page 378
the chance of fires caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating. If you ever have a problem on the road and do not have a spare fuse - 2006 GMC Canyon | Owner's Manual - Page 379
the cover and lift. To reinstall the cover, line up the tab and push down on the cover until the tab clicks into place. The engine compartment fuse block is located on the driver's side of the engine compartment. See Engine Compartment Overview on page 5-12 for more information on location. 5-103 - 2006 GMC Canyon | Owner's Manual - Page 380
5-104 - 2006 GMC Canyon | Owner's Manual - Page 381
SNSR CRUISE HTD/SEAT AIRBAG ABS BCK/UP FRT/AXLE Usage Wiper Anti-lock Brake System 2 (ABS Pump) Power Door Locks (If Equipped) Electronic Throttle Control (ETC) Oxygen Sensors Cruise Control Switch, Inside Rearview Mirror, Transfer Case Control Module, Brake Switch, Clutch Disable Heated Seat (If - 2006 GMC Canyon | Owner's Manual - Page 382
PRK LAMP Usage Rear Turn/Hazard Lights Map Sensor, Can Purge Solenoid Powertrain Control Module (PCM) Transmission Solenoid Ignition, Clutch Starter Switch, Neutral Safety Back-Up Switch, Ignition Coils 1-5, Air Conditioning Relay Injectors Anti-lock Brake System 1 (ABS Logic) Front Park/Turn Lamps - 2006 GMC Canyon | Owner's Manual - Page 383
IGN 3 HVAC RAP PRK/LAMP HDLP FOG/LAMP FUEL/PUMP A/C CMPRSR Usage Daylight Running Lamps (If Equipped) Beam Selection Ignition 3, Climate Control, Climate Control Head Fuse, Power Seat Fuse Retained Accessory Power (Power Window Fuse, Wiper/Washer Switch Fuse), Sunroof Fuse Front Parking Lamp Fuse - 2006 GMC Canyon | Owner's Manual - Page 384
Lubricants on page 6-13 for more information. Capacities and Specifications Capacities Application English Metric Cooling System 2.8L Engine 10.4 qt 9.8 L 3.5L Engine 10.6 qt 10.0 L Engine Oil with Filter 2.8 L Engine 5.0 qt 4.7 L 3.5 L Engine 6.0 qt 5.7 L Fuel Tank 19.5 gal 76 L Transmission (Drain - 2006 GMC Canyon | Owner's Manual - Page 385
Engine Specifications Type 2.8L 3.5L VIN Code 8 6 Transmission Automatic Manual Automatic Manual Spark Plug Gap 0.042 inches (1.07 mm) 0.042 inches (1.07 mm) 5-109 - 2006 GMC Canyon | Owner's Manual - Page 386
✍ NOTES 5-110 - 2006 GMC Canyon | Owner's Manual - Page 387
Schedule Owner Checks and Services ...6-8 At Each Fuel Fill ...6-9 At Least Once a Month ...6-9 At Least Once a Year ...6-10 Recommended Fluids and Lubricants ...6-13 Normal Maintenance Replacement Parts ...6-15 Maintenance Record ...6-16 Maintenance Schedule ...6-2 Introduction ...6-2 Maintenance - 2006 GMC Canyon | Owner's Manual - Page 388
Notice: Maintenance intervals, checks, inspections, replacement parts, and recommended fluids and lubricants as prescribed in this manual are necessary to keep your vehicle in good working condition. Any damage caused by failure to follow scheduled maintenance may not be covered by warranty. 6-2 - 2006 GMC Canyon | Owner's Manual - Page 389
. See Off-Road Driving on page 4-15. • use the recommended fuel. See Gasoline Octane on page 5-5. The services in Scheduled Maintenance on page 6-4 should be performed when indicated. See Additional Required Services on page 6-6 and Maintenance Footnotes on page 6-7 for further information. 6-3 - 2006 GMC Canyon | Owner's Manual - Page 390
Life System on page 5-16 for information on the Engine Oil Life System and resetting the system. When the CHANGE OIL message appears, certain services, checks, and inspections are required. Required services are described in the following for "Maintenance I" and "Maintenance II." Generally, it is - 2006 GMC Canyon | Owner's Manual - Page 391
Scheduled Maintenance Service Change engine oil and filter. See Engine Oil on page 5-13. Reset oil life system. See Engine Oil Life System on page 5-16. An Emission Control Service. Visually check for any leaks or damage. See footnote (g). Inspect engine air cleaner filter. If necessary, replace filter - 2006 GMC Canyon | Owner's Manual - Page 392
at the first maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Inspect exhaust system for loose or damaged components. Replace engine air cleaner filter - 2006 GMC Canyon | Owner's Manual - Page 393
will not nullify the emission warranty or limit recall liability prior to the completion of the vehicle's useful life. We, however, urge that all recommended maintenance services be performed at the indicated intervals and the maintenance be recorded. (a) Visually inspect brake lines and hoses for - 2006 GMC Canyon | Owner's Manual - Page 394
the filter at each engine oil change. (k) Visually inspect belt for fraying, excessive cracks, or obvious damage. Replace belt if necessary. Owner Checks and Services These owner checks and services should be performed at the intervals specified to help ensure the safety, dependability and emission - 2006 GMC Canyon | Owner's Manual - Page 395
oil at the proper level can cause damage to your engine not covered by your warranty. Tire Wear Inspection Tire rotation may be required for high mileage highway drivers prior to the Engine Oil Life System service notification. Check the tires for wear and, if necessary, rotate the tires. See Tire - 2006 GMC Canyon | Owner's Manual - Page 396
starts in any other position, contact your GM Goodwrench® dealer for service. On manual transmission vehicles, put the shift lever in NEUTRAL (N), push the clutch down halfway, and try to start the engine. The vehicle should start only when the clutch is pushed down all the way to the floor. If the - 2006 GMC Canyon | Owner's Manual - Page 397
Lock Control System Check Ignition Transmission Lock Check While parked, and with the parking brake set engine. Without applying the regular brake, try to move the shift lever out of PARK (P) with normal effort. If the shift lever moves out of PARK (P), contact your GM Goodwrench® dealer for service - 2006 GMC Canyon | Owner's Manual - Page 398
held by the parking brake only. • To check the PARK (P) mechanism's holding ability: With the engine running, shift to PARK (P). Then release the parking brake followed by the regular brake. Contact your GM Goodwrench® dealer if service is required. Underbody Flushing Service At least every spring - 2006 GMC Canyon | Owner's Manual - Page 399
Fluid Manual Transmission (GM Part No. U.S. 89021806, in Canada 89021807). Hydraulic Clutch Fluid Hydraulic (GM Part No. U.S. 12345347, Clutch System in Canada 10953517) or equivalent DOT-3 brake fluid. Multi-Purpose Lubricant, Superlube Key Lock (GM Part No. U.S. 12346241, in Cylinders Canada - 2006 GMC Canyon | Owner's Manual - Page 400
Secondary (GM Part No. U.S. 12346293, in Latch, Pivots, Canada 992723) or lubricant Spring Anchor, meeting requirements of NLGI #2, and Category LB or GC-LB. Release Pawl Usage Usage Hood and Door Hinges, Body Door Hinge Pins, Liftgate Hinge and Linkage, Folding Seats, and Fuel Door Hinge Outer - 2006 GMC Canyon | Owner's Manual - Page 401
Normal Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your GM dealer. Part Automatic Transmission Filter Kit 4WD Vehicle 2WD Vehicle Engine Air Cleaner/Filter Engine Oil Filter 2.8L Engine 3.5L Engine Spark Plugs Windshield - 2006 GMC Canyon | Owner's Manual - Page 402
Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-2. Any additional information from Owner Checks and Services on page 6-8 can be - 2006 GMC Canyon | Owner's Manual - Page 403
Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed 6-17 - 2006 GMC Canyon | Owner's Manual - Page 404
Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed 6-18 - 2006 GMC Canyon | Owner's Manual - Page 405
Defects to the Canadian Government ...7-14 Reporting Safety Defects to General Motors ...7-15 Service Publications Ordering Information ...7-15 Customer Assistance and Information ...7-2 Customer Satisfaction Procedure ...7-2 Online Owner Center ...7-4 Customer Assistance for Text Telephone (TTY - 2006 GMC Canyon | Owner's Manual - Page 406
sales, service or parts manager, contact the owner Canada, contact GM of Canada Customer Communication by calling 1-800-263-3777 (English) or 1-800-263-7854 (French). We encourage you to call the toll-free number in order to give your inquiry prompt attention. Please have the following information - 2006 GMC Canyon | Owner's Manual - Page 407
additional rights you may have. Canadian owners refer to your Warranty and Owner Assistance Information booklet for information on the Canadian Motor Vehicle Arbitration District of Columbia. Eligibility is limited by vehicle age, mileage, and other factors. General Motors reserves the right to - 2006 GMC Canyon | Owner's Manual - Page 408
e-mail service reminders. • Access information about your specific vehicle, including tips and videos and an electronic version of this owner's manual (United States only). • Keep track of your vehicle's service history and maintenance schedule. Customer Assistance Offices GMC encourages customers - 2006 GMC Canyon | Owner's Manual - Page 409
Paseo de la Reforma # 2740 Col. Lomas de Bezares C.P. 11910, Mexico, D.F. 01-800-508-0000 Long Distance: 011-52-53 29 0 800 Canada General Motors of Canada Limited Customer Communication Centre, 163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 1-800-263-3777 (English) 1-800-263-7854 (French - 2006 GMC Canyon | Owner's Manual - Page 410
following services during the Bumper-to-Bumper warranty period, at no expense to you: This program, available to qualified applicants, can reimburse you up to $1,000 of the cost of eligible aftermarket adaptive equipment required for your vehicle, such as hand controls or a wheelchair/scooter lift - 2006 GMC Canyon | Owner's Manual - Page 411
fits: Your Roadside Assistance Representative can provide you with specific information regarding this feature. In many instances, mechanical failures are covered under GMC's Bumper-to-Bumper warranty. However, when other services are utilized, our Roadside Assistance Representatives will explain any - 2006 GMC Canyon | Owner's Manual - Page 412
. If your vehicle cannot be scheduled into the service department immediately, keep driving it until it can be scheduled for service, unless, of course, the problem is safety-related. If it is, please call your dealership, let them know this, and ask for instructions. If the dealer requests that - 2006 GMC Canyon | Owner's Manual - Page 413
sole discretion. Additional Program Information Courtesy Transportation is available during the Bumper-to-Bumper warranty coverage period, but it is not part of the New Vehicle Limited Warranty. A separate booklet entitled Warranty and Owner Assistance Information furnished with each new vehicle - 2006 GMC Canyon | Owner's Manual - Page 414
vehicle computers to monitor emission control components to optimize fuel economy, to monitor conditions for airbag deployment and, if so equipped, to provide anti-lock braking and to help the driver control the vehicle in difficult driving situations. Some information may be stored during regular - 2006 GMC Canyon | Owner's Manual - Page 415
® subscription service agreement or manual for information on its operations and data collection. Collision Damage Repair If your vehicle is involved in a collision and it is damaged, have the damage repaired by a qualified technician using the proper equipment and quality replacement parts. Poorly - 2006 GMC Canyon | Owner's Manual - Page 416
. See Roadside Assistance Program on page 7-6 for more information. • If your vehicle cannot be driven, know where the towing service will be taking it. Get a card from the tow truck operator or write down the driver's name, the service's name, and the phone number. • Remove any valuables - 2006 GMC Canyon | Owner's Manual - Page 417
replacement collision parts be original equipment parts, either new Genuine GM parts or recycled original GM parts. Remember, recycled parts will not be covered by your GM vehicle warranty using aftermarket parts. Discuss this with your repair professional, and insist on Genuine GM parts. Remember - 2006 GMC Canyon | Owner's Manual - Page 418
20590 You can also obtain other information about motor vehicle safety from the hotline. Reporting Safety Defects to the Canadian Government If you live in Canada, and you believe that your vehicle has a safety defect, you should immediately notify Transport Canada, in addition to notifying General - 2006 GMC Canyon | Owner's Manual - Page 419
8P7 Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body, etc. Transmission, Transaxle, Transfer Case Unit Repair Manual This manual provides information on - 2006 GMC Canyon | Owner's Manual - Page 420
Owner's Information Owner publications are written specifically for owners and intended to provide basic operational information about the vehicle. The owner's manual will include the Maintenance Schedule for all models. In-Portfolio: Includes a Portfolio, Owner's Manual, and Warranty Booklet. RETAIL - 2006 GMC Canyon | Owner's Manual - Page 421
, Fixed Mast ...3-79 Antenna, XM™ Satellite Radio Antenna System ...3-79 Anti-Lock Brake System (ABS) ...4-7 Anti-Lock Brake, System Warning Light ...3-31 Appearance Care Aluminum Wheels ...5-98 Care of Safety Belts ...5-96 Chemical Paint Spotting ...5-100 Cleaning Exterior Lamps/Lenses ...5-97 - 2006 GMC Canyon | Owner's Manual - Page 422
...Replacement Bulbs ...Taillamps, Turn Signal, Stoplamps and Back-up Lamps ...Buying New Tires ... 2-15 5-48 5-51 5-50 5-48 5-49 5-52 5-51 5-64 B Battery ...5-41 Run-Down Protection ...3-18 Battery Warning Light ...3-29 Before Leaving on a Long Trip ...4-34 Brake Anti-Lock Brake System (ABS - 2006 GMC Canyon | Owner's Manual - Page 423
Comfort Guides, Rear Safety Belt ...1-31 Content Theft-Deterrent ...2-13 Control of a Vehicle ...4-6 Coolant Engine Temperature Gage ...3-32 Heater, Engine ...2-19 Cooling System ...5-30 Cruise Control ...3-11 Cruise Control Light ...3-37 Cupholder(s) ...2-40 Customer Assistance Information Courtesy - 2006 GMC Canyon | Owner's Manual - Page 424
...5-101 Engine Compartment Fuse Block ...5-103 Fuses and Circuit Breakers ...5-102 Power Windows and Other Power Options ...5-102 Windshield Wiper Fuses ...5-102 Engine Air Cleaner/Filter ...5-18 Battery ...5-41 Check and Service Engine Soon Light ...3-32 Coolant ...5-25 Coolant Heater ...2-19 - 2006 GMC Canyon | Owner's Manual - Page 425
Overview ...Exhaust ...Fan Noise ...Oil ...Oil Life System ...Overheating ...Starting ...Event Data Recorders (EDR) ...Exit Lighting ...Extender, Safety Belt ...Exterior Cargo Lamps ...Exterior Lamps ... 3-32 5-12 2-32 5-35 5-13 5-16 5-28 2-17 7-10 3-18 1-34 3-17 3-14 F Filter Engine Air Cleaner - 2006 GMC Canyon | Owner's Manual - Page 426
Roads ...4-36 Hood Checking Things Under ...5-10 Release ...5-11 Horn ...3-6 How to Use This Manual ...ii How to Wear Safety Belts Properly ...1-18 Hydraulic Clutch ...5-24 H Hazard Warning Flashers ...3-6 Head Restraints ...1-8 Headlamps ...5-49 Automatic Headlamp System ...3-15 Bulb Replacement - 2006 GMC Canyon | Owner's Manual - Page 427
Cargo ...3-17 Fog ...3-16 Interior ...3-17 LATCH System Child Restraints ...1-46 Latches, Seatback ...1-9 Light Airbag Readiness ...3-26 Anti-Lock Brake System Warning ...3-31 Light (cont.) Battery Warning ...3-29 Brake System Warning ...3-30 Cruise Control ...3-37 Daytime Running Lamps Indicator - 2006 GMC Canyon | Owner's Manual - Page 428
Normal Maintenance Replacement Parts ...6-15 Owner Checks and Services ...6-8 Recommended Fluids and Lubricants ...6-13 Scheduled Maintenance ...6-4 Using ...6-2 Your Vehicle and the Environment ...6-2 Malfunction Indicator Light ...3-32 Manual Lumbar Controls ...1-3 Manual Seats ...1-2 Manual - 2006 GMC Canyon | Owner's Manual - Page 429
...2-38 Manual Mirrors ...2-37 Power Mirrors ...2-37 Owner Checks and Services ...6-8 Owners, Canadian ...ii Passlock® ...2-15 Pickup Conversion to Chassis Cab ...4-49 Power Accessory Outlet(s) ...3-18 Door Locks ...2-8 Electrical System ...5-102 Lumbar Controls ...1-4 Retained Accessory (RAP - 2006 GMC Canyon | Owner's Manual - Page 430
and Tools ...5-73 Replacement Bulbs ...5-52 Reporting Safety Defects Canadian Government ...7-14 General Motors ...7-15 United States Government ...7-14 Restraint System Check Checking the Restraint Systems ...1-79 Replacing Restraint System Parts After a Crash ...1-80 Retained Accessory Power (RAP - 2006 GMC Canyon | Owner's Manual - Page 431
Belt Comfort Guides ...1-31 Rear Seat Passengers ...1-28 Right Front Passenger Position ...1-26 Safety Belt Extender ...1-34 Safety Belt Use During Pregnancy ...1-26 Safety Belts Are for Everyone ...1-13 Shoulder Belt Height Adjuster ...1-25 Safety Warnings and Symbols ...iii Scheduled Maintenance - 2006 GMC Canyon | Owner's Manual - Page 432
Service (cont.) Engine Soon Light ...3-32 Publications Ordering Information ...7-15 Servicing Your Airbag-Equipped Vehicle ...1-77 Setting , Stoplamps and Back-up Lamps ...5-51 Theft-Deterrent, Radio ...3-77 Theft-Deterrent Systems ...2-13 Content Theft-Deterrent ...2-13 Passlock® ...2-15 Tilt Wheel - 2006 GMC Canyon | Owner's Manual - Page 433
Different Size ...If Control System (TCS) ...4-9 Trailer Recommendations ...4-68 Transmission Fluid, Automatic ...5-19 Fluid, Manual ...5-22 Up-Shift Light ...3-30 Transmission Operation, Automatic ...2-20 Transmission Operation, Manual ...2-22 Trip Odometer ...3-24 Truck-Camper Loading Information - 2006 GMC Canyon | Owner's Manual - Page 434
...2-13 W Warning Lights, Gages and Indicators ...3-22 Warnings DIC Warnings and Messages ...3-42 Hazard Warning Flashers ...3-6 Other Warning Devices ...3-6 Safety and Symbols ...iii Vehicle Damage ...iv Wheels Alignment and Tire Balance ...5-68 Different Size ...5-66 Replacement ...5-68 Where to