2006 GMC Canyon Owner's Manual - Page 326

Sealed Beam Headlamps To replace the headlamp capsule, do the following: 1. Remove the four retainer screws and the retainer. 2. Pull the headlamp capsule toward you and unplug the electrical connector from it. 3. Remove the old headlamp capsule. 4. Plug the electrical connector into the new headlamp capsule. 5. Reverse Steps 1 and 2 to reinstall the headlamp. Front Turn Signal, Parking and Daytime Running Lamps (DRL) To replace one of these bulbs, do the following: 1. Open the hood. See Hood Release on page 5-11 for more information. 2. Reach in to access either one of the bulb sockets. 3. Turn the bulb socket counterclockwise and remove it from the lamp assembly. 4. Remove the old bulb from the bulb socket. 5. Insert the new bulb into the bulb socket. 6. Insert the bulb socket into the lamp assembly and turn it clockwise until it is tight. 5-50