2007 Honda Odyssey Owner's Manual - Page 378
2007 Honda Odyssey Manual
Page 378 highlights
Lights Driver's side BULB TAB 5. Push the electrical connector back onto the bulb. Make sure it is on all the way. 6. Turn on the headlights to test the new bulb. 7. If you replaced the high beam headlight bulb on the passenger's side, reinstall the power steering fluid reservoir. Replacing a Front Turn Signal Bulb CONNECTOR 2. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 3. Remove the bulb by turning it onequarter turn counterclockwise. 4. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. BULB SOCKET 1. Open the hood. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 2. Pull the burned out bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 372