2011 Honda Odyssey Owner's Manual - Page 96

Multi-Information Display Customized Settings On Touring Models DRIVER'S ID You can customize some vehicle control settings. To change the settings, the ignition switch must be in the ON (II) position, and the vehicle must be stopped with the transmission in Park. To enter the customizing mode, press either INFO button ( / ) repeatedly until ''CUSTOMIZE SETTINGS'' is displayed, then press the SEL/RESET button. If you try to enter the customizing mode while the vehicle is moving, you will see a ''MUST STOP AND SHIFT TO PARK TO CHANGE SETTINGS'' message and you cannot change the settings. If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page 96. If you want to change any vehicle control settings, select CHANGE SETTINGS, then press the SEL/ RESET button. Refer to the table on the next page about the settings you can customize. Instruments and Controls You can customize some vehicle control settings for ''DRIVER 1'' and ''DRIVER 2'' separately. If ''DRIVER 1'' or ''DRIVER 2'' is not displayed, customizing is not possible. To have the driver's ID detected, make sure your remote transmitter is linked to the system and the driver's door is unlocked with a corresponding remote transmitter. CONTINUED 2011 Odyssey 93