2014 Honda Odyssey 2014 Odyssey Touring and Touring Elite Technology Reference - Page 6

2014 Honda Odyssey Manual

Page 6 highlights

TIRE PRESSURE MONITORING SYSTEM (TPMS) How It Works Monitors the vehicle's tire pressures. DRIVING POSITION MEMORY SYSTEM (DPMS) Programming the DPMS Store driver's seat and side mirror positions into memory for each corresponding remote transmitter (1or 2). When the tire pressure drops significantly below recommended levels, the low tire pressure indicator comes on and a message appears in the MID. 1. Turn the vehicle on. Shift into Park (P). 2. Adjust the seat and outside mirrors to your preferred positions. 3. Press SET. You will hear a beep. What to Do 1. Visually inspect the tires for damage. 2. Use a tire air pressure gauge to check which tire(s) have low pressure. 4. Within 5 seconds, press the memory button corresponding to the remote (1 or 2) you are using. You will hear two beeps. 3. Inflate the tire(s), if necessary, to the recommended pressures listed on the label on the driver's doorjamb. Notes: • Once set, stored positions can be recalled by pressing one of the memory buttons (1 or 2) on the door. • Lumbar positions cannot be stored. 8 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

8
9
What to Do
How It Works
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Monitors the vehicle’s tire pressures.
When the tire pressure drops
significantly below recommended
levels, the low tire pressure
indicator comes on and a
message appears in the MID.
1.
Visually inspect the tires for damage.
2.
Use a tire air pressure gauge to check which tire(s)
have low pressure.
3.
Inflate the tire(s), if necessary, to the recommended
pressures listed on the label on the driver’s doorjamb.
DRIVING POSITION MEMORY SYSTEM (DPMS)
Store driver’s seat and side mirror positions into memory for each corresponding
remote transmitter (1or 2).
Programming the DPMS
Notes:
• Once set, stored positions can be recalled by pressing one of the memory
buttons (1 or 2) on the door.
• Lumbar positions cannot be stored.
1.
Turn the vehicle on. Shift into Park (P)
.
2.
Adjust the seat and outside mirrors
to your preferred positions.
3. Press SET.
You will hear a beep.
4.
Within 5 seconds, press the
memory button corresponding to
the remote (1 or 2) you are using.
You will hear two beeps.