2004 Jeep Liberty Owner's Manual - Page 201

UNDERSTANDING YOUR INSTRUMENT PANEL 201 Temperature Control The degree of comfort can be selected by rotating the temperature control knob on the right. The coldest temperature setting is fully counterclockwise and the warmest setting fully clockwise. The knob can be positioned at any detent. Mode Selection The mode selector (the center rotary knob) can be set in any of the following positions: OFF This position turns off the blower motor and outside air will not pass through any outlets. Max A/C - Recirculation Cool air flows through the outlets located in the instrument panel. Use this mode to rapidly cool the inside of the vehicle. This feature allows for recirculation of interior air only. This mode can also be used to temporarily block out outside odors, smoke, and dust. Slight airflow from the defrost outlet, located at the base of the windshield, may be noticed. Normal A/C Cool air flows through the outlets located in the instrument panel. Slight airflow from the defrost outlet, located at the base of the windshield, may be noticed. Bi-Level A/C Cool air flows through the outlets located in the instrument panel, on the floor, and in the rear of the center console. Slight airflow from the defrost outlet, located at the base of the windshield, may be noticed. Bi-Level Air flows through the outlets located in the instrument panel, on the floor, and in the rear of the center console. Slight airflow from the defrost outlet, located at the base of the windshield, may be noticed. 4