2007 Jeep Grand Cherokee Owner Manual SRT8 - Page 109
2007 Jeep Grand Cherokee Manual
Page 109 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 4. Adjust the brake and accelerator pedals to the desired positions. 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 6. Turn the ignition switch to the OFF position and remove the key. 7. Press and release the SET (S) button located on the driver's door. 8. Within 5 seconds, press and release memory button 1 or 2 on the driver's door. The next step must be performed within 5 seconds if you desire to also use a Remote Keyless Entry transmitter to recall memory positions. 9. Press and release the "Lock" button on one of the transmitters. 10. Insert the ignition key and turn the ignition switch to the ON position. 11. Select ЉRemote Linked to MemoryЉ in the Electronic Vehicle Information Center (EVIC) and enter ЉYesЉ or select ЉUse Factory SettingsЉ from the EVIC and enter ЉYesЉ. Refer to "Electronic Vehicle Information Center (EVIC) - Customer Programmable Features" in Section 4 for more information. 12. Repeat the above steps to set the next memory position using the other numbered memory button or to link another Remote Keyless Entry transmitter to memory. Memory Position Recall NOTE: The vehicle must be in Park to recall memory positions. If a recall is attempted when the vehicle is not in Park, a message will be displayed in the Electronic Vehicle Information Center (EVIC). 3