2008 Jeep Liberty Owner's Manual - Page 300

300 STARTING AND OPERATING Shift Positions The electronic transfer case switch is located on the center console next to the gear selector lever. 4WD Auto 4-Wheel-Drive Auto High Range - This active ondemand position makes available optimum traction for a wide range of conditions, while maximizing driver convenience. This position is always in 4-wheel drive mode, with a normal 42% front axle, 58% rear axle torque split. The system also anticipates and prevents slip by redirecting torque as necessary, up to 100% to the front or rear axle, if needed. 4WD Low 4-Wheel-Drive Low Range - Low speed 4-wheel drive that locks the front driveshaft and rear driveshaft together and forces the front and rear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose or slippery road surfaces only. Do not exceed 25 mph (40 km/h). This position allows engine starting without depressing the clutch pedal on vehicles equipped with a manual transmission. Refer to "Clutch 4WD Control Switch 2WD Rear Wheel Drive High Range - Normal street and highway driving. Dry hard surfaced roads.