2009 Jeep Liberty Quick Reference Guide - Page 4

ve h i c l e f e at u r e s Rear Wiper/Washer Front Wipers Front Washer (pull toward driver) Push ON/OFF Button Mist (down) Speed Control Lever: CRUISE On/Off • Push the ON/OFF button to activate the Speed Control.  •  CRUISE will appear on the instrument cluster to indicate the Speed Control is on.  •  Push the ON/OFF button a second time to turn the system off. Wiper/Washer Lever: Front Wipers Intermittent, Low and High Operation Rotate the end of the lever to the first detent position for one of five intermittent settings, the second detent for low wiper operation and the third detent for high wiper operation. Mist • Pull down on the lever and release when a single wipe is desired. Washer Operation • Pull the lever towards you and hold for as long as spray is desired. Rain Sensing Wipers This feature senses moisture on the vehicle's windshield and automatically activates the wipers for the driver when the switch is in the intermittent positions. Refer to Owner's Manual for operation. Set •  With Speed Control on, press down and release the lever to set a desired speed. Accel/Decel  •  Press and hold the lever up to accelerate or down to decelerate the vehicle; release the lever to save the new set speed.  •  Once a speed is set, tapping the lever up or down will increase or decrease the set speed approximately 1 mph (2 km/h). Rear Wiper Wiper Operation Rotate the center portion of the lever forward to the first detent for rear wiper operation. Washer Operation Rotate the center portion of the lever past the first detent to activate the rear washer. Cancel  •  Pull the lever toward you, or apply the brakes to cancel the set speed and maintain the set speed memory.  •  Push the ON/OFF button to turn the system off and erase the set speed memory. Resume •  To resume a previously selected speed in memory, push the lever up and release.