2009 Jeep Liberty Owner's Manual - Page 450

448 MAINTAINING YOUR VEHICLE Front Turn Signal and Front Side Marker Lights 1. Turn the steering wheel all the way to the right to access the left front turn signal or side marker. Turn the steering wheel all the way to the left to access the right front turn signal or side marker. 2. Remove three push-pins from the wheel-well liner. 3. Gently flex the wheel-well liner forward to access the bulb. 4. Rotate the bulb's socket counterclockwise, and remove the bulb and socket assembly from the housing. 5. Pull the bulb out of the socket and insert the replacement bulb. 6. Install the bulb and socket assembly into the housing, and rotate the socket clockwise to lock it in place. 7. Reposition the wheel-well liner and install the push-pins. Front Fog Light 1. Open the hood. 2. Reach behind the headlight housing to access the bulb. 3. Rotate the bulb's socket counterclockwise, and remove the bulb and socket assembly from the fog light housing. 4. Pull the bulb out of the socket and insert the replacement bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 5. Install the bulb and socket assembly into the into the fog light housing, and rotate the connector clockwise to lock it in place.