2014 Jeep Grand Cherokee Owner Manual Supplement - Page 76

2014 Jeep Grand Cherokee Manual

Get 2014 Jeep Grand Cherokee PDF manuals and user guides View all 2014 Jeep Grand Cherokee manuals

Page 76 highlights

74 MAINTAINING YOUR VEHICLE 3. Open the water drain valve, and let any accumulated water drain. 4. Close the water drain valve. 5. Remove using a socket. Rotate counterclockwise for removal. Remove used o-ring and discard it. 6. Remove the used filter cartridge from the housing and dispose of according to your local regulations. 7. Wipe clean the sealing surfaces of the lid and housing. 8. Install new o-ring back into ring groove on the filter housing and lubricate with clean engine oil. 9. Repeat steps 5 through 8 to service second filter in fuel filter assembly. NOTE: WIF (Water In Fuel) sensor is re-usable. Service kit comes with new o-ring for filter canister and WIF sensor. Fuel Filter Assembly 1 - Fuel Filter Access 2 - Water in Fuel Drain 1. Ensure engine is turned off. 2. Place drain pan under the fuel filter assembly.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
1 — Fuel Filter Access
2 — Water in Fuel Drain
1. Ensure engine is turned off.
2. Place drain pan under the fuel filter assembly.
3. Open the water drain valve, and let any accumulated
water drain.
4. Close the water drain valve.
5. Remove using a socket. Rotate counterclockwise for
removal. Remove used o-ring and discard it.
6. Remove the used filter cartridge from the housing and
dispose of according to your local regulations.
7. Wipe clean the sealing surfaces of the lid and housing.
8. Install new o-ring back into ring groove on the filter
housing and lubricate with clean engine oil.
9. Repeat steps 5 through 8 to service second filter in fuel
filter assembly.
NOTE:
WIF (Water In Fuel) sensor is re-usable. Service
kit comes with new o-ring for filter canister and WIF
sensor.
Fuel Filter Assembly
74
MAINTAINING YOUR VEHICLE