2009 Lexus IS 350 Scheduled Maintenance Guide - Page 30

2009 Lexus IS 350 Manual

Page 30 highlights

EXPLANATION OF MAINTENANCE ITEMS Engine Oil and Oil Filter Replace the oil filter and drain and refill the engine oil at specified intervals. For recommended oil grade and viscosity, refer to your Owner's Manual. Some models are equipped with a replaceable oil-filter element and oil-filter cap O-ring; replace both at each oil change. For instructions on how to reset the reminder light, refer to your Owner's Manual. Engine Valve Clearance (IS F, SC) Inspect for excessive lifter noise and engine vibration and adjust if necessary. (All other models are equipped with hydraulic valve lash adjusters that require no periodic clearance inspection or adjustment.) Exhaust Pipes and Mountings Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration and damage. Start the engine and listen carefully for any exhaust leakage. Tighten connections and replace parts as necessary. Fuel Lines and Connections, Fuel Tank Band and Fuel Tank Vapor Vent System Hoses Visually inspect for corrosion, damage, cracks, and loose or leaking connections. Tighten connections and replace parts as necessary. Fuel Tank Cap Gasket Visually inspect for cracks, deterioration and damage and replace if necessary. Nuts and Bolts on Chassis Check that tightness of the seatmounting bolts and front/rear suspension-member retaining bolts matches torque measurements specified in the Repair Manual. Power Steering Fluid When inspecting, visually check the power steering fluid level on the seethrough reservoir. Add fluid as necessary. For fluid specifications, refer to your Owner's Manual. Rack and Pinion Assembly Inspect the rack and pinion assembly for signs of leakage, damage and loose electrical connections. Tighten connections and if you discover any leakage or damage, have it repaired immediately by a qualified technician. Road Test While driving the vehicle, check for proper operation of engine, transmission, brakes and steering. Also check for abnormal noise or vibration from any part of the vehicle. MAINTENANCE 68 Scheduled Maintenance Log

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

EXPLANATION OF MAINTENANCE ITEMS
MAINTENANCE
Scheduled Maintenance Log
68
Engine Oil and Oil Filter
Replace the oil filter and drain and
refill the engine oil at specified inter-
vals. For recommended oil grade
and viscosity, refer to your
Owner’s
Manual
. Some models are equipped
with a replaceable oil-filter element
and oil-filter cap O-ring; replace both
at each oil change. For instructions on
how to reset the reminder light, refer
to your
Owner’s Manual
.
Engine Valve Clearance
(IS F, SC)
Inspect for excessive lifter noise and
engine vibration and adjust if neces-
sary. (All other models are equipped
with hydraulic valve lash adjusters that
require no periodic clearance inspec-
tion or adjustment.)
Exhaust Pipes and Mountings
Visually inspect the exhaust pipes,
muffler and hangers for cracks,
deterioration and damage. Start
the engine and listen carefully for
any exhaust leakage. Tighten connec-
tions and replace parts as necessary.
Fuel Lines and Connections, Fuel
Tank Band and Fuel Tank Vapor
Vent System Hoses
Visually inspect for corrosion, dam-
age, cracks, and loose or leaking
connections. Tighten connections
and replace parts as necessary.
Fuel Tank Cap Gasket
Visually inspect for cracks, deterio-
ration and damage and replace if
necessary.
Nuts and Bolts on Chassis
Check that tightness of the seat-
mounting bolts and front/rear suspen-
sion-member retaining bolts matches
torque measurements specified in the
Repair Manual
.
Power Steering Fluid
When inspecting, visually check the
power steering fluid level on the see-
through reservoir. Add fluid as neces-
sary. For fluid specifications, refer to
your
Owner's Manual
.
Rack and Pinion Assembly
Inspect the rack and pinion assembly
for signs of leakage, damage and
loose electrical connections. Tighten
connections and if you discover any
leakage or damage, have it repaired
immediately by a qualified technician.
Road Test
While driving the vehicle, check for
proper operation of engine, transmis-
sion, brakes and steering. Also check
for abnormal noise or vibration from
any part of the vehicle.